Linksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?

Jan 2, 2013

Is it possible to configure the WRT54G as a repeater signal of the WRT120N?

View 1 Replies


ADVERTISEMENT

Linksys WRT54G Router / Configure A Repeater For A PPPoE Connection?

May 3, 2011

I am using a PPPoE connection using a linksys WRT54G router (working perfectly) and am now trying to set up an Edimax EW-7206APg to extend my wireless connection range. I followed the instructions given on the Edimax manual, and while my devices (iPad, laptop) got connected to the new repeater network, I could not access the Internet from it. I may be wrong, but the instructions on the Edimax manual seemed to be for a DHCP connection. Is there anything different I need to do to configure the Edimax repeater on a PPPoE connection?My router IP ("Local IP address") shows 10.10.0.1 instead of the "192.168.1.1" that all the documentation online seems to suggest.

View 6 Replies View Related

Linksys Wireless Router :: WRT120N Drops Signal To Laptop?

Sep 17, 2011

My WRT120N drops signal to Laptop occasionally and I do not understand why. I tried to update the firmware, version 1.0 to 1.0.04, is that a newer version? My next step is to try to update the drivers in the laptop. The dropped signal seems random and only happens with the laptop. Other devices connected work fine.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g V2.2 As Wifi Repeater?

Nov 30, 2011

is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist? 

View 3 Replies View Related

Linksys Wireless Router :: WRT120N - Extend Signal Through Ethernet Cable?

Nov 11, 2012

I have a Linksys WRT120N plugged directly into my cable modem upstairs, an 8 port switch plugged into it, an ethernet cable from it run downstairs in my house to another 8 port switch and a Linksys E4200 plugged into it.  I want both routers to allow me to connect to the internet wirelessly if possible.  I cannot even access the E4200 from a browser, because the IP adress 192.168.1.1 goes directly to the WRT120N.

View 4 Replies View Related

Linksys Wireless Router :: Way To Configure WRT120N With 3G USB Modem?

Aug 7, 2011

Setting up my wrt120n ROUTER  for remote view.this is becos i dont have a DSL cable modem, what i have is a 3G  usb modem.

View 1 Replies View Related

Linksys Wrt54g Router - Inconsistent Wireless Signal?

Jun 6, 2012

I have a linksys wrt54g wireless router and a few weeks ago my wireless connection started to become inconsistent, it would randomly drop service or be very slow, and now it has become very inconsistent and slow, all the while the wireless signal would be 4-5 bars.On my windows 7 desktop, often times the yellow triangle with the exclamation mark pops up over the signal strength indicator when its at 4-5 bars.I've tried changing to 2 different routers and its the same, and the problem is persistent for all computers in the house.I've connected directly via ethernet to the modem and router and service was fine.There are a few wireless networks in the area,some with quite strong signals, but I downloaded the xirrus wifi inspector and it says I'm not sharing a channel (channel 1) and though I'm ~15ft from the router, the signal is ~65dbm, which seems low and is almost equivalent to neighbor's wireless strength.

View 2 Replies View Related

Linksys Wireless Router :: Low Signal Strength With Wrt54g?

Oct 16, 2011

My wireless router has been spotty since my cable company installed a new modem for cable internet.  I have powercycled several times, downloaded new firmware, rebooted and am still having problems.  Lately when I do finally get on the internet with a wireless device, the signal strength is very low.  It is low on my iphone, on my Mac laptop and also on my Samsung Bluray player.  Lately a window keeps popping up when I am trying to watch netflix that states my band width is too low, even though it has been working fine for 2 months.  Is my router outdated?

View 5 Replies View Related

Linksys Wrt54g V2 Router To Repeater?

Jul 27, 2011

I have a linksys wrt54g v2 router I want to convert to a repeater. I looked up instructions buteveryone says after all is done I have to connect my main router to the new configured rrepeater. Is there.a way I can do this without connectingthem together via cable. My house is seperate from the main house and running cable is not logical I have signal at my house just need better signal

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Signal Won't Reach Laptop From Far Away

Mar 25, 2013

it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
 
the model is WRT54G, and the serial number is CDFD1F9CJ507.

View 1 Replies View Related

Linksys Wireless Router :: Configure Pppoe On WRT120N It Say It's Connected But Cannot Access Wan

Aug 11, 2010

I have configure pppoe on my WRT120N it say it's connected but cannot access wan side of the router.

View 5 Replies View Related

Configure Tplink Modem On Repeater Mode In Order To Repeat Signal From (Huawei)?

Dec 4, 2011

That's y topology:

(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable

I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - See Signal But Can't Connect With Computer Or Iphones?

Oct 17, 2011

I am having problems connecting to my wireless internet.  We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect.  We tried resetting everything, turned on and off several times.  Went to the linksys wireless set up page, changed SSID and password.  Still can't connect with the computer or our iphones.  It shows our SSID is there but won't connect.  My internet when plug directly to the computer works fine (I am using it now).  My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.

View 1 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Weaker Than Old Wrt54g

Aug 27, 2012

I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face.  When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
 
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.

View 9 Replies View Related

Linksys Wireless Router :: EA6500 How To Configure As Base Station For Repeater

Oct 20, 2012

I would like to use my new EA6500 as the base station and another wireless router with Wireless Repeating Function as a repeater. Is the EA6500 capable of that?? I have not found any documentation on that subject.

View 6 Replies View Related

Linksys Wireless Router :: Wrt120n Always Gives Error When Try To Configure Home Network Defender

Jan 6, 2013

I got error message everytime i try to configure home network defender and i tried to find the solution but no luck but everytime i click and enter my email and password i get this message, i bough this router recently and the only troubles i have is with this 

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Signal Vanishes Completely / Keeps Dropping Connection?

Dec 26, 2012

My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Signal Frequently Disconnects Then Recovers Automatically

Jul 31, 2012

I have a LinkSys WRT54G Wireless-G Broadband Router located in my basement office. My IBM T42 ThinkPad running Windows XP Pro has an Intel(R) PRO Wireless 2200BG Network Connection adaptor. The signal strength on the main floor of our townhouse is ~ 80%. My problem is the signal frequently disconnects then recovers automatically causing frustration when browsing the internet. My question: Should I upgrade to a new Wireless N router OR purchase a WiFi Range Extender? since my laptop has a Wireless-G adaptor would a Wireless-N router provide a stronger signal?

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Signal Strength Bounce After Firmware Upgrade

Dec 10, 2012

Have two WRT54G Wireless Routers.
 
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x 
 
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
 
Plugged in the WRT54G ver. 2, Firmware Version v2.x  Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
 
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 -  I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.

View 6 Replies View Related

Linksys Wireless Router :: Setup Wrt54g As Access Point To Extend Signal?

Aug 17, 2011

how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
 
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?

View 1 Replies View Related

Linksys Wireless Router :: Use WRT54G Router With The Newer WRT310N To Extend Signal?

Aug 27, 2008

Can you use your WRT54G router with the newer WRT310N router to extend your wireless signal? How?

View 7 Replies View Related

Linksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?

Jun 22, 2010

I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N? 

View 5 Replies View Related

Linksys Wireless Router :: Configure E2500 As Router And WAP54G As Repeater?

Dec 28, 2012

Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.

View 2 Replies View Related

Linksys Wireless Router :: Configure Apple Airport Express To Extend Wrt120N Network

Aug 6, 2011

Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how? 

View 2 Replies View Related

Linksys Wireless Router :: How To Configure WRT54G With DSL Modem

Jul 22, 2008

I have WRTG54G with 4ports and a internet port, i have a zoom adsl modemfor DSL i wants to share DSL connection with internet port on WRTG54G but i d'nt know how to do this

View 5 Replies View Related

Linksys Routers - Using BEFW11S4v4 As Bridge Or Repeater To Send Wireless Signal

Jan 4, 2012

If I have two Linksys wireless routers in my house, ( 1 Wireless-G as the Gateway attached to the DSL line, and attached to the main computer, and 1 Wireless-b model BEFW11S4v4 that I want to use as a bridge or as a repeater to send the wireless signal around the attic (2 floors away) and I have connected them via Ethernet, and then connected to the attic computer (not the main one) via Ethernet to Wireless-B, why can I not get connectivity on the attic computer?

If I forgo the Wireless-B router, and connect the ethernet to the attic computer everything is fine, but there is no wireless signal in the attic. (only downstairs where the Wireless-G is.) I believe I can access the Wireless-G and tell it to be a bridge or a repeter (?? I think) but as far as I can tell the Wireless-B is giving itself the same IP address as the Gateway Wireless-G is using, and I don't have an connectivity, so I can't change it! Im confused.

View 1 Replies View Related

Use A Linksys WRT54G Router To Get A Signal For Desktop?

Aug 6, 2012

Can I use a Linksys WRT54G router to get a signal for my desktop? I am using a modem that has wifi downstairs and want to get a signal for a desktop I have in the kids room upstairs

View 4 Replies View Related

Linksys Wireless Router :: Configure USB Dapter For WRT54G Network?

Jul 8, 2011

I've downloaded the driver for a tenda usb adapter.  What else do I need to do to connect to the WRT54G network? I'm currently connected via an ethernet cable. Running Windows/7.

View 1 Replies View Related

Linksys Access Point :: Settings WAP4410N As Repeater For WRT120N

Jul 19, 2011

I bought my self a WRT120N as my wireless router for my house. and not a long ago i bought the WAP4410N, for my repeater (after i ask to some people).my house were concrete wall, it have about 15-20cm thick, and we try to avoid any wired LAN. The destinaton were unreachable with only WRT120N.it's look like this (what i want for the network on my home) : [code] i already tried to setting the WAP4410 as a wireless WDS repeater, and wireless client/repeater (with and without "Allow wireless stations to associate"). both were unable to connect (limited), although i get the signal. for the IP on the WAP4410N (192.168.0.50), i used static IP [IP, Subnet and Default Gateway were fill in] within the WRT120N range (192.168.0.2 ->192.168.0.51)
 
- how i configure my WAP4410N as a repeater?

- is there any settings that i must set on the WRT120N, before combining the WAP4410N?

View 1 Replies View Related

Linksys Wireless Router :: Guide To Configure E1200 - Signal Lost Or Limited

May 7, 2013

I have a linksys E1200 router connected to a modem Zyxel P600 Series, and I suffer every 24 hours exact connections with the modem connected only works perfect, but with the router every 24 hours Connection signal is lost no or limited so look for a guide aver if set correctly.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g Lost Connectivity - Need To Reset / Configure

Dec 26, 2011

I recently set up a wrt54g router that I got used from a friend.  I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days.  Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again.  Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again. 

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g - Need To Reset / Configure For Continuous Wifi Connection?

Dec 21, 2012

Every night I turn everything off via power strip, including the router. Before I turn off the router, my roku connection is good.In the morning, the roku will work for about 20 minutes, then disconnects, and then I'm unable to find the router.I'll then need to reset my router's settings (I have the WRT54GS), and then uplug, and replug the router.It's important that I unplug the router every night.Is there a way to configure the settings so I don't have to reconfigure the settings every morning?

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g - Configure Firewall And Wifi Encryption To Maximize Safety

Mar 20, 2012

I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
 
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
 
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved