Linksys Wireless Router :: WRT120N Drops Signal To Laptop?

Sep 17, 2011

My WRT120N drops signal to Laptop occasionally and I do not understand why. I tried to update the firmware, version 1.0 to 1.0.04, is that a newer version? My next step is to try to update the drivers in the laptop. The dropped signal seems random and only happens with the laptop. Other devices connected work fine.

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT120N Drops Connection Several Times A Day

Jan 23, 2011

I have a WRT120N router .It has something to do with turning on or re-introducing certain wireless devices into the area. When I come home with my iPhone & my wife is on her computer, suddenly the wifi stops. And vice-versa. It's ridiculous. I'm not a computer programmer but if I was I'm pretty sure this would be a no-brainer to fix. Especially if the company that paid me took pride in their products.

View 8 Replies View Related

Linksys Wireless Router :: WRT120N Drops Connection Several Times A Day?

Apr 9, 2012

my router drops connection several times a day. I have to unplug the router every day so that my devices can stay connected. I hate when this happens late at night when i'am upstairs and have to go 2 stairs down to get internet on my devices. For example if i want to connect my iPhone to my Wireless network it gives me an error with: 'No connection can be astablished with this network'. 

View 1 Replies View Related

Linksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?

Jan 2, 2013

Is it possible to configure the WRT54G as a repeater signal of the WRT120N?

View 1 Replies View Related

Linksys Wireless Router :: WRT120N - Extend Signal Through Ethernet Cable?

Nov 11, 2012

I have a Linksys WRT120N plugged directly into my cable modem upstairs, an 8 port switch plugged into it, an ethernet cable from it run downstairs in my house to another 8 port switch and a Linksys E4200 plugged into it.  I want both routers to allow me to connect to the internet wirelessly if possible.  I cannot even access the E4200 from a browser, because the IP adress 192.168.1.1 goes directly to the WRT120N.

View 4 Replies View Related

Linksys Wireless Router :: Laptop Will Not Connect To WRT120N?

Jan 25, 2011

I am trying to manually setup a WRT120N router. I am using my laptop (hard wired) for the initial setup. Okay, everything is working fine until I unplug the ethernet cable and try to go wireless. Will not connect to my network. I am also having this problem with all my other devices.
 
I had everything running fine on a WRT54G, I just wanted to try out the WRT102N. I did change the SSID name form what I was using on the WRT54G.

View 9 Replies View Related

Linksys Wireless Router :: New Laptop Won't Connect To WRT120N

Dec 25, 2011

I can connect via a ethernet cable but can't connect via a "Ralink RT5390 802.11 b/g/n WiFi Adapter" on a HP Pavilion G6 Windows 7 OS. It finds the connection (with a strong signal) and asks for my network key but then says "Windows was unable to connect to network"

View 1 Replies View Related

Linksys Wireless Router :: WRT120N Not Accessing Internet With Laptop

Jul 9, 2011

I just connected my WRT120N router to the modem of my Cable provider. Everything seems to work well, however every 1-3 days I cannot access internet anymore with my laptop. When I press "IP address release" button in the router settings everything seems to work fine for again 1-3 days. Is there any way I can prevent this from happening all the time?

View 1 Replies View Related

Linksys Wireless Router :: New E4200 Drops Internet Connection To Laptop Only

Nov 29, 2011

I have a brand new E4200 with two desktop computers using it with no problems.  I also have a work Thinkpad laptop that I use a couple of times a week from home.  Since day one of installing the new router, I have experienced the blue screen of death numerous times during the day (the number of times varies from 1 to 6 on a really bad day).  I believe this is happening when I lose my connection to the router.  I can see it trying to reestablish itself but the VPN will drop the connrection before it has a chance.  I never lost my VPN connection until the day I installed the  new router.  Yesterday, at least one time it was unable to reestablish connectivity with the router and I had to reboot the laptop to get it connected.  Could this have something to do with the IP address?  I do not have any issues with the laptop when I am at work using a docking station.
 
So, I am wondering why I am constantly losing connectivity on the laptop only.  The laptop has Windows XP and I am using AT&T Global Network Client to access the work network.  Is there a setting somewhere that will fix this?  Our IT folks rebuilt my laptop and I am still experiencing the same problem.   I checked and I have the current version of the firmware for the router. 

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Signal Won't Reach Laptop From Far Away

Mar 25, 2013

it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
 
the model is WRT54G, and the serial number is CDFD1F9CJ507.

View 1 Replies View Related

Linksys E1000 - Wireless Speed Drops To Nothing When Main PC Is Off With Great Signal

Jun 22, 2012

I have a Linksys E1000 running on the latest firmware available from the Cisco website. When my main PC (Windows 7 64Bit SP1) which is connected with a ethernet cable is running the wireless speed is great for all my connected devices. (Android/Apple phones, tablets, family PC, etc). But when I shut down my main PC the wireless speed drops to the point where it can take 3-5 mins for google.com to load up. The wireless connection is still showing as strong, just the speed isn't there anymore. If I were to turn my PC back on, everything will load up almost instantly and be back to normal. I've tried reinstalling the router, resetting it all back to default settings and re configuring it but I've had no luck in solving this.

View 2 Replies View Related

Linksys Wireless Adapters :: E2000 / Signal Strength Drops To 50% When Connected

Jan 2, 2012

I have the following problem:
 
Adapter: WMP600N
Router: E2000 (N-only)
OS: Windows 7 X64
 
When I'm not connected to my wireless network, the signal strength is 4 bars (out of 5)Once connected, it drops to 2 bars. Speed is 39 Mbps. Why?I have updated the drivers (strangly, it says the drivers are from Ralink Technology. Corp, version 3.00.00.0041 built by: WinDDK)

View 4 Replies View Related

Linksys Cable / DSL :: Cisco X2000 Drops Wireless Signal - Requires Reboot

Jul 15, 2012

I recently installed a Cisco X2000. Several PCs running Windows XP Pro connect wirelessly. Also, we have an Android device and iPhone connected to the wireless network. We have a network printer and network drive connected via wires to the router. Most of the time the router and cable modem features work well. However, every so often all devices lose wireless signal simultaneously. It is not possible to reconnect to the X2000 unless I unplug the X2000 and plug it back in. After this reboot, we can connect again. Obviously, this is quite frustrating. By the way, we get acceptable signal strength after the X2000 locks out however none of the devices (computers or phones) are able to connect.

View 1 Replies View Related

Linksys WRT54G2 / 4th Router But Still Dropping Signal To Laptop?

Feb 14, 2011

i am on my 4th router but still dropping signal to laptop. if I unplug the router and plug back in it works. but not for long. am getting very upset.

View 3 Replies View Related

Routers / Switches :: DLINK Router Drops The Signal At 9:15

Feb 6, 2011

At 9:15 each night my DLINK router drops the signal.I've tried to unplug it but that doesn't work but it is working again each morning. I can plug directly into the cable modem and it works so I assume it is fine.Is there a time setting on the router?

View 1 Replies View Related

Netgear N600 Router - Signal Drops Significantly

Nov 7, 2012

I have a netgear n600 router and in the room its in i get around 50 down and 12 up but in other rooms it drops significantly(the highest ive gotten is 11 down in other rooms). is there any setting i can go into.

View 3 Replies View Related

HP 6197CA Drops Wireless Signal?

Jul 10, 2012

I have had an HP 6197CA for 6 months. This week it started dropping the wireless network, or connecting randomly at 1mbps when all other laptops, Blackberries, AppleTVs, etc. are getting about 20mbps when tested.

Specs: Windows 7 64 bit
Processor: Intel i7-2360QM 2.0 Ghz with Turbo boost technology
RAM: 8GB DDR3
Graphics: Radeon HD 6770m 1GB
Storage: 2 x 500 GB 7200rpm
Network Interface: Integrated 10/100/1000 Gigabit Ethernet LAN
Wireless: Wireless LAN 802.11 b/g/n. Bluetooth wireless networking with WiDi

When I plug right into my router I'm getting 20 mbps.I've tried a number of channels and changed the router to 20MHz.

View 7 Replies View Related

Dell :: 17R SE 7720 Windows 8 N2230 Drops Wireless Signal

Dec 25, 2012

My new computer was delivered December 21, 2012.  Imagine my surprise that I can't connect to my wireless connection unless I am less than 10 feet away from the AT& T wireless router.  There are 3 computers 1 floor up and 30 feet away that can connect, so I know it isn't that the signal isn't strong enough.  My Inspiron 9300 that I have had since 2005 can connect and I am using it right now.  Here's my specifics.

17r SE 7720
Windows 8
1 T hard drive
8 G RAM
32 G SATA Drive
Inter N-2230
AT&T internet wireless router.

The new computer will hook up when extremely close to the router but it does lose the signal occasionally even though I am only 10 feet away.

View 9 Replies View Related

WRT120N - Laptop Does Not Connect To Router Wirelessly

Aug 17, 2011

My desktop (that I am currently on) connects fine to the router but I can't get my laptop to wirelessly connect to the router.. it finds it and sometimes it says that it is connected but the connection is broken and can't be repaired. The wireless on the laptop itself says it is also loggen in. I really don't know what to do.. Laptop is an Acer Aspire One Windows XP model number ZG5 Router is Linksis by Cisco model number WRT120N It is Encrypted WPA2 I do have firewalls I am just really confused.. It did connect for like 10 seconds and then nothing.

View 3 Replies View Related

Netgear Wireless Router / Samsung Laptop Not Picking Up Wireless Signal?

Aug 27, 2012

I've just bought a new Samsung 3 series laptop (Windows 7 Home Premium 64 bit). I have two braodband lines at my home (1: Sky with standard Sky wireless router. 2: BT with Netgear wireless router). The Netgear router is primarily used for business but I also use it to connect with my old Dell laptop and my iPad. However I cant seem to connect with my new Samsung laptop to the Netgear router. I want to get rid of the Sky broadband line but neet to get the Netgear line working correctly first.If i turn the Netgear router off and then on again the laptop can see the router and picks up the wireless signal and connects for a few minutes before it drops off and then it can find it again. The laptop does similar with the Sky router except that the connection seems to last longer before it drops off and at least it can always see the Sky wireless signal for me to reconnect again.

View 3 Replies View Related

Linksys Wireless Router :: WRT120n - How To Set To 811.11n

Apr 18, 2012

Linksys WRT120N to 811.11n? I set  to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.

View 3 Replies View Related

Wireless Not Working On WRT120N Linksys Router?

May 18, 2011

I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.

View 8 Replies View Related

Linksys Wireless Router :: Can WRT120N Use Subnet 255.0.0.0

Mar 25, 2011

I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x  with a subnet of 255.0.0.0   I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N QoS Does Not Work?

Oct 29, 2009

I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming.  Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up. 
 
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem

View 9 Replies View Related

Linksys Wireless Router :: How To Setup WRT120N

Sep 5, 2010

I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Keeps Resetting On Its Own?

Jan 18, 2010

My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?

View 9 Replies View Related

Linksys Wireless Router :: Disable WPS On WRT120N?

Aug 20, 2011

Is there anyway to disable WPS on the WRT120N router?
 
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?

View 3 Replies View Related

Linksys Wireless Router :: Can't Get New WRT120N To Connect

Mar 17, 2010

I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet.  When I go through the steps from the CD to install, the wizard does not find the connection.  When the internet is plugged directly into the computer, it works fine.  If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install

View 4 Replies View Related

Linksys Wireless Router :: Wrt120n / Wifi Keeps Going Off

Jul 2, 2012

I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.

View 9 Replies View Related

Linksys Wireless Router :: Map Page On Wrt120n?

Apr 2, 2013

why are some of the lines solid & others dotted on the map page?

View 4 Replies View Related

Linksys Wireless Router :: Cannot Connect PS3 On WRT120N

Dec 25, 2011

I removed my ps3 from my network map and now i can't connect it back. How to do it?

View 1 Replies View Related

Linksys WRT120N Wireless Router Installation Process?

Mar 27, 2011

I plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?

View 3 Replies View Related

Linksys Wireless Router :: WRT120N Keeps Loosing Connection

Sep 3, 2011

I have several computers and printers connected to a WRT120N router which is connected to 10mpbs DSL.  The computers are all running WIN7 and are hardwired to the router.  On the one PC, it keeps losing network connection.  I've tried upgrading the router's firmware, reset, etc. to no avail.
 
I think it may be related to the same IP address being assigned to multiple machines connected to the router.  Is there a way to set specific IP addresses to each item connected to the router to see?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved