Linksys Wireless Router :: Wrt54g V2.2 As Wifi Repeater?

Nov 30, 2011

is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist? 

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?

Jan 2, 2013

Is it possible to configure the WRT54G as a repeater signal of the WRT120N?

View 1 Replies View Related

Linksys Wrt54g V2 Router To Repeater?

Jul 27, 2011

I have a linksys wrt54g v2 router I want to convert to a repeater. I looked up instructions buteveryone says after all is done I have to connect my main router to the new configured rrepeater. Is there.a way I can do this without connectingthem together via cable. My house is seperate from the main house and running cable is not logical I have signal at my house just need better signal

View 1 Replies View Related

Linksys WRT54G Router / Configure A Repeater For A PPPoE Connection?

May 3, 2011

I am using a PPPoE connection using a linksys WRT54G router (working perfectly) and am now trying to set up an Edimax EW-7206APg to extend my wireless connection range. I followed the instructions given on the Edimax manual, and while my devices (iPad, laptop) got connected to the new repeater network, I could not access the Internet from it. I may be wrong, but the instructions on the Edimax manual seemed to be for a DHCP connection. Is there anything different I need to do to configure the Edimax repeater on a PPPoE connection?My router IP ("Local IP address") shows 10.10.0.1 instead of the "192.168.1.1" that all the documentation online seems to suggest.

View 6 Replies View Related

Linksys Wireless Router :: How To Use 2500 With Huawei Ws320 Wifi Repeater

Jun 12, 2012

I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?

View 2 Replies View Related

Linksys Wireless Router :: Wifi Connection Through Wrt54g

Nov 22, 2011

I am trying to connect a myTouchQ (t-mobile) through my WRT54G.  The android shows that I'm connected and have a good signal, but I can't access the internet or any data.  When I turn off the wi-fi connection, I can access through the 4G network. My provider is Cox Cable.  I've unplugged the modem and the router for 30 seconds and even reset the security.

View 5 Replies View Related

Linksys Wireless Router :: Win 7 Wifi Causes Wrt54g To Slow Down 20x

Apr 5, 2013

My wrt54g (firmware old - v1.00.6) has run fine for years until my daughter got a laptop with win7. All my other systems still run XP or win2k. I only run wireless with her win7 and one netbook with xp, all the other connections are wired.
 
Going to speedtest.net and after I reset (pull power) the router, I get 20Mbps download. After the win7 wifi runs for a bit, download speed drops to 2 Mbps or less. It seems to be after she goes to you tube and starts watching videos. If I reset again, it immediately goes back to the full speed of 20. I measure this after she's taken her laptop off the network. So, whatever her win7 is doing, it stays that way after she disconnects (i.e. slow on my other systems) until the reset. I also measured the speed on her win7 system and it also would slow there as well and speed up after a reset (for a while).

View 3 Replies View Related

Using Linksys WRT54G As Repeater?

Feb 24, 2012

I recently purchased a Linksys E1200 to replace my Linksys WRT54G. I'd like to utilize the WRT54G as a repeater. Is this possible, or do I need to buy a "repeater"? how to configure/set up the WRT54G repeater?

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g - Setting Up Wifi Network?

Apr 27, 2013

I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
 
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
 
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.

1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.

2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?

3. What are the main settings I need to know about? What "mode" does each need to be set to?  Do they need different default gateways?

Can I use the same password/security for all of them? Should I use the same SSID for all?

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g V3 - Wifi Still Isn't Broadcasting For Devices

Aug 6, 2012

I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012).  This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."

View 4 Replies View Related

Linksys Wireless Router :: Iphone 5 Wifi Connectivity With Wrt54g

Dec 1, 2012

I am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.

View 2 Replies View Related

Linksys Wireless Router :: Lost Wifi Connection Often With Wrt54g

Jul 20, 2011

My router's wireless connection goes down intermittently,about once a day.  I can access the network with a machine that has a hardwired connection to the router only.  To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
 
LinkSys WRT54G V3.1 router with firmware update V4.21.1

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g No Internet Either Wired Or Wifi

May 26, 2012

DSL modem works fine when connected directly to computer. No internet output from WRT54G wired or wireless, but wireless network is recognized by computer, just no internet.  I did a reset and installed the latest firmware, then I ran thru the setup CD that came withe the router, and the internet test said no internet connection was available.  Cables are fine, connector innards look clean. 

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g Lost Wifi Connection

Apr 29, 2012

My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
 
I have a Mac laptop. Verizon ISP. 

View 2 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Weaker Than Old Wrt54g

Aug 27, 2012

I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face.  When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
 
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.

View 9 Replies View Related

Linksys Wireless Router :: Wrt54g - Internet Speeds Slowing Down When Wifi Enabled

Jun 27, 2011

I have both the WRT54G and a E1000 wireless routers and this problem is occurring for both of them.I use AT&T DSL and the speeds are fine when it is :

1. Not plugged into router

2. Wireless Network Mode is disabled through the router configuration page, having all devices wired.
 
However when wireless network mode is enabled, speeds drop significantly, 15~17 ms ping goes to 250~800 ping, and download speeds are way lower also. When the router is reset, the regular speeds will return for maybe 30 seconds to 1 minute, then it'll drop back down. I'm positive there's no outsiders connected to my network and this problem still occurs, only when the router is giving out wireless signals. Sometimes the problem randomly goes away for a while but it will always come back. I've tried many things, firmware upgrades, factory restore, none of them seem to work, the only solution so far has been to disabling it, but I need it to be on as there are other devices in other rooms of the house that need WiFi to connect to the internet.

View 9 Replies View Related

Linksys Wireless Router :: Wrt54g - Need To Reset / Configure For Continuous Wifi Connection?

Dec 21, 2012

Every night I turn everything off via power strip, including the router. Before I turn off the router, my roku connection is good.In the morning, the roku will work for about 20 minutes, then disconnects, and then I'm unable to find the router.I'll then need to reset my router's settings (I have the WRT54GS), and then uplug, and replug the router.It's important that I unplug the router every night.Is there a way to configure the settings so I don't have to reconfigure the settings every morning?

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g - Regular Wifi Connection Failure After Updating To 4.21.5?

Aug 26, 2012

I recently updated my WRT54G V3 to frimware 4.21.5 and now get regular wireless connection issues.  The wired connection never has any problem (can connect to the router and the internet), but none of the wireless devices can see either.
 
The problem happens every couple of days, and cycling the power seems to be the only fix. When the problem does occur, the wireless devices don't even see the broadcasted SSID.  But cycling the WRT54G's power fixes that.
 
I've gotten a few suggestions to do a "30-30-30" reset, but can't find exactly what that entails.

View 5 Replies View Related

Linksys Wireless Router :: Wrt54g - Use Dhcp For Wifi / Assign Private Ip For Pc (wired Connection)

Dec 20, 2011

Could I use DHCP for wireless connection and assign private IP for PC for wire connection ?Will it conflict to each other ?

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g - Configure Firewall And Wifi Encryption To Maximize Safety

Mar 20, 2012

I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
 
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
 
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.

View 9 Replies View Related

Cisco Wireless :: WRT54G - How To Set Up WAP 200 As Wi-Fi Repeater

Mar 22, 2011

Actually i´m working in a departamet of networking in my business with only cisco devices. I used to work with the wap200 wireless-G Acceess point (Small bussiness), but now i have a problem with it. I´m trying set the wap 200 as a wireless repeater for WRT54G but it´s a impossible.

View 1 Replies View Related

Linksys Wrt54g - Supply 3 Pc's With One Wifi Signal From Usb Wireless Adapter?

May 15, 2011

My cable went out and my neighbor and I have decided to split her at$t broadband, the phone/modem/router is a 2wire.

I have 3 windows 7 computers but only one wireless g usb wireless adapter from tenda. I also have a linksys wrt54g wireless router that I can use.

I have tried to set up the router as a wireless bridge by loading a DD-WRT bin on my linksys but it seemed way buggy -results - I was only able to get 2 of 3 online and if I restarted any of them I lost the connection completely.

Went back to stock firmware and tried to set up a lan between the 3 towers with the linksys then just bridge the two connections on the main pc - results -no internet at all on 2nd and 3rd pc... and when the connection to the wifi network is started I loose my networking to the 2 pc's on the linksys.

Im not sure if im not setting these up correctly as im just following guides and such but since im fairly good with computers this is making me crazy...to be able to set three computers up on 1 good clear wifi should be an easy task but it's just not working out..

View 1 Replies View Related

Linksys Cable / Dsl :: How To Setup Wag120n As Wifi Repeater

Mar 11, 2012

I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.

View 1 Replies View Related

Cisco Routers :: Linksys Wireless-g Broadband Wrt54g Wifi Protected Setup

Apr 10, 2012

I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.

I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it.  I pushed this but the wireless usb adapter failed to locate the wireless network.  There is also another button on the back of the Linksys Router that is a Reset button.

View 1 Replies View Related

Use My D-link Router As A Repeater For Wifi?

Apr 8, 2013

I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.

View 1 Replies View Related

Extending Household Wifi Using A Router As A Repeater?

Apr 12, 2011

I am trying to use a NETGEAR 54Mbps Wireless ADSL2+ Modem Router (Model DG834G v4) as a repeater to extend the WiFi I currently have off another NETGEAR router in my house to my office which is a seperate building in my backyard (75 feet away depending on where I place my router exactly).I've scoured the vast internet for specifics with this particular router. I am fairly well versed in computer-type verbage and usage, but networking is an alien language to me.

View 1 Replies View Related

D-Link DIR-825 :: Wrt54g / Can It Be Setup As A Repeater

May 24, 2011

Can a dir-815 be setup as a repeater?? I have a Linksys wrt54g as the main router can the dir-815 be used to extend the wifi range of the Linksys router.  If the dir-815 can be setup as a repeater how would I go about setting it up as a repeater?

View 3 Replies View Related

Make Dlink Dsl-2640t Router To Work As Wifi Repeater?

Sep 4, 2012

make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]

View 5 Replies View Related

Linksys Wireless Router :: Use WRT54GR As Repeater?

Feb 22, 2008

is it possible to use the WRT54GR as a repeater ? I have a WAG54GX2 and wish to use 2 WRT54GR's as repeaters

View 9 Replies View Related

Linksys Wireless Router :: Possible To Use E1200 As Repeater

Jan 4, 2012

Is it possible to use a Linksys E1200 as a repeater? If so, how do I set it up?

View 3 Replies View Related

Linksys Wireless Router :: Using A WAP54G As A Repeater For E2500?

Aug 15, 2012

I have an E2500 wireless N router that I recently bought to replace a cheapie netgear that I lent to family.  The router is in the basement near a bunch of metal ducting and I live near a radio station, both of which I believe is killing my signal.  Anyways, I was able to pick up a WAP54G wireless access point.  I would like to use it as a wired repeater (hopefully to get the signal up into the upper levels of my house).  Can I use the WAP54G with the E2500?  I looked in the setup page when I was trying to set it up as a repeater, and it says it will only connect with another WAP54G or a WRT54G (linksys wireless g router).

View 6 Replies View Related

Linksys Wireless Router :: How To Make Wrt-160nv2 As Repeater

May 8, 2012

I bought the e4200v2 and would like us my old router  wrt-160nv2 as a Repeater can I do this.

View 5 Replies View Related

Linksys Wireless Router :: Setting Up A WRH54G As A Repeater?

Jul 10, 2011

My house is a little too big for my WRT160N v3 to be able to get to every room, so i was wondering if i could set up my old WRH54G as a repeater to get that extra distance to get those last room on the network? if so how to set up the connection?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved