Linksys Wireless Router :: Using A WAP54G As A Repeater For E2500?

Aug 15, 2012

I have an E2500 wireless N router that I recently bought to replace a cheapie netgear that I lent to family.  The router is in the basement near a bunch of metal ducting and I live near a radio station, both of which I believe is killing my signal.  Anyways, I was able to pick up a WAP54G wireless access point.  I would like to use it as a wired repeater (hopefully to get the signal up into the upper levels of my house).  Can I use the WAP54G with the E2500?  I looked in the setup page when I was trying to set it up as a repeater, and it says it will only connect with another WAP54G or a WRT54G (linksys wireless g router).

View 6 Replies


ADVERTISEMENT

Linksys Wireless Router :: Configure E2500 As Router And WAP54G As Repeater?

Dec 28, 2012

Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.

View 2 Replies View Related

Linksys Wireless Router :: Using WAP54G With E2000 As Repeater?

Jun 2, 2011

I have set my WAP54G up as a repeater for my E2000 but the signal for Guest access is only about 1/2 of the strength of the signal for my network.  Is there a way to boost the signal for Guest access? 

View 2 Replies View Related

Linksys Wireless Router :: Connecting WAP54G To E2500?

Dec 15, 2011

Is it possible to connect my WAP54G to my new E2500 router?I previously had a WRT54G and had my WAP54G connected to it in AP Client mode.  This enabled me to have internet access on my desktop computer that is located in another room downstairs.I would like to configure my WAP54G to work with my new E2500 router in the same way.

View 2 Replies View Related

Linksys Wireless Router :: Connect WAP54G To New E2500?

Jan 19, 2012

Is it possible to connect my WAP54G to my new E2500 router?
 
I previously had a WRT54G and had my WAP54G connected to it in AP Client mode.  This enabled me to have internet access on my desktop computer that is located in another room downstairs.

View 2 Replies View Related

Linksys Wireless Router :: WAP54g Repeater Connecting To E2000?

Nov 3, 2011

I have just installed an E2000 router in an upstairs office. The signal strength is quite low downstairs so my question is: Can I use a wap54g as a repeater. If so, how do I get the MAC address of the E2000?. The E2000 has two bands and is currently running at 2.4. Would the range increase if I changed the setting to 5.

View 4 Replies View Related

Linksys Access Point :: WAP54G To Use This AP As A Repeater

Mar 7, 2011

I have a WAP54G as my access point, currently it is connected with my BEFSR81 router. I am thinking of changing the access point to a WAP610N for the house. I know that this would work but I was wondering if the WAP54G could be used as a repeater for the outside (I know a lower speed). I know they are two different channels but I wanted a larger range for my wireless. I am on Windows XP, SP2, using Firefox. Can this be done?

View 4 Replies View Related

Linksys Access Point :: How To Setup Wap54g As Repeater To WRT54GL

Jun 25, 2011

I have WRT54GL and want to setup wap54g as wireless repeater? I need to expand the signal using wap54g

View 1 Replies View Related

Linksys Access Point :: WAP54g Repeater Showing As Device But Is Not Connected

Jan 28, 2012

I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?

View 1 Replies View Related

Linksys Wireless Router :: Connect Two WAP54G To WRT160n

Nov 16, 2011

I need to go two ways in my house to improve the wireless signal. Do I just run ethernet cable from the router to the access points? Do i then setup each AP?

View 1 Replies View Related

Linksys Wireless Router :: WAP54G Apparently Not Being Able To Do WPA2

Mar 12, 2012

I have a WRT54GS v5 running firmware version 1.52.8.   When I select the WPA wireless security mode, the encryption technique is fixed to TKIP - I am not given the option to change it to AES?   I would really like to be able to select WPA- with AES (this is related to the WAP54G apparently not being able to do do WPA2 - AES in client mode).

View 3 Replies View Related

Linksys Wireless Router :: Connecting WRT120N And WAP54G By Wire?

Oct 17, 2010

Is it possible to get a WAP54G wireless access point working with a WRT120N wireless router, by wiring the 2 devices together?

View 6 Replies View Related

Linksys Wireless Router :: Getting WAP54g To Repeat (extend) Signals

May 15, 2013

At one of our offices, we have a Cisco ASA5505 firewall that has dhcp enabled. I have a WRT54G router plugged into that firewall with DHCP enabled. The scope of our inside network is 192.168.51.***, however when connected to the WRT54G, it gives you the scope of 192.168.1.***We have an antenna amplifier screwed into one of the antenna ports on the router. This whole setup works fine.
 
 The problem is we need to install an access point WAP54G in a building across the property (picks up router wireless signal fine) to repeat the wireless signal to the back of the property where the router will not reach. I have read that all you need to do is type in the wireless mac address of the routher into the access point and select "Wireless Repeater". I have the channels set to 6 on both devices as well as the same security configuration. When I try to connect to the wireless network on the access point, It never gives me an ip in the 192.168.1.*** scope, which the WRT54G is configured to give out. Also, in this setup does the WRT54G need to be set to router or gateway mode? I do not need it to distribute ip addresses. [code]

View 1 Replies View Related

Linksys Wireless Router :: EA4200 - Configure WAP54G To Use As Guest Network

Feb 1, 2013

The situation is Main house running Linksys EA4200, I have a garage apartment rental that is to far away to receive the wireless guest network.I ran a cat5e to the apartment, can I configure the EA4200 to allow the WAP54G access point to use the guest network? I want to prevent my renters from having access to the home network, but just have basic internet access separate/outside my network.

View 6 Replies View Related

Linksys Wireless Router :: Wrt54gs V7 And A Wap54g V3.1 - Unable To Get IP Address From Access Point

Mar 1, 2012

I have a wrt54gs v7 and a wap54g v3.1.  Both have latest firmware on them.  I set the access point to act as a repeater and entered the mac address from the router (It said to use the lan mac address.  is that right?).  I have them set on same subnet with static ip addresses.  They have same wireless ssid and password with one using channel 10 and the other using channel 2.  I can receive an ip address from the router and connect to internet.  I cannot get an ip address from the access point.  I tried a static ip on the computer and it will connect, but I don't have internet.  Am I missing something in the setup?  Can this access point act as a repeater for this router? 

View 3 Replies View Related

Cisco Routers :: Setting Up WAP4410N As Repeater To Extend Signal Of E2500?

Apr 18, 2012

Im having problems with setting up my cisco WAP4410N as a repeater to extend the signal of cisco E2500.It works fine when there is no password to be set on both devices. But when either one of these devices had beenset a password on it, then WAP4410N failed to extend the signal of E2500.
 
I tried steps as below:
 
1. Same password type in WAP4410N and E2500.

2. Different password type in WAP4410N and E2500.

3. Set password in WAP4410N ONLY.

4. Set password in E2500 ONLY.
 
All steps above makes WAP4410N fail to extend the signal range of E2500. WAP4410N successfully works as a repeater to extend the signal of E2500 when there is no password to be set on both devices.

View 2 Replies View Related

Linksys Wireless Router :: Use WRT54GR As Repeater?

Feb 22, 2008

is it possible to use the WRT54GR as a repeater ? I have a WAG54GX2 and wish to use 2 WRT54GR's as repeaters

View 9 Replies View Related

Linksys Wireless Router :: Possible To Use E1200 As Repeater

Jan 4, 2012

Is it possible to use a Linksys E1200 as a repeater? If so, how do I set it up?

View 3 Replies View Related

Linksys Wireless Router :: Missing MAC Addresses Filtering In Linksys E2500?

Sep 5, 2011

I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.

View 4 Replies View Related

Linksys Wireless Router :: Reset Static DNS On A Linksys E2500?

Oct 4, 2012

I previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
 
How can I reset the static DNS ip address back to 0.0.0.0 ?

View 4 Replies View Related

Linksys Wireless Router :: How To Make Wrt-160nv2 As Repeater

May 8, 2012

I bought the e4200v2 and would like us my old router  wrt-160nv2 as a Repeater can I do this.

View 5 Replies View Related

Linksys Wireless Router :: Setting Up A WRH54G As A Repeater?

Jul 10, 2011

My house is a little too big for my WRT160N v3 to be able to get to every room, so i was wondering if i could set up my old WRH54G as a repeater to get that extra distance to get those last room on the network? if so how to set up the connection?

View 1 Replies View Related

Linksys Wireless Router :: Setting Up EA4500 As Repeater?

Jan 17, 2013

I have EA4500 router that connects a couple of desktops in one room. I am having to setup another room for gaming for which I have another EA4500 router. I want to setup the second EA4500 uplink(accesspoint) as the first EA4500. I dont find any interface to do it. I am able to do it wired(by connecting the both the routers through LAN ports). but I dont want to run cable across the house.  know if it is possible with another firmware. Or should I return this new EA4500 and buy another router?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Setup As Repeater?

Jan 25, 2012

I use my e2000 as router and want to use the e4200 as repeater. so if i connect wireless to my e4200 i can see all my devices also the one on the e2000. How to setup the e42000 ?

View 5 Replies View Related

Linksys Wireless Router :: Adding Repeater To E1550?

May 16, 2012

I have a Linksys E1550.  I would like to extend its range by using an old Netgear N600 I have laying around.  I know the Netgear can be used as a repeater.  I do not know what settings I need to change in my Linksys router to be able to use a repeater.  

View 5 Replies View Related

Linksys Wireless Router :: Wrt54g V2.2 As Wifi Repeater?

Nov 30, 2011

is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist? 

View 3 Replies View Related

Linksys Wireless Router :: N4200 - Using As Access Repeater?

Nov 21, 2012

My wife just was using our 4200N router fine this morning. I went to try and use the internet and it was not working. I can connect my PC directly to the modem and works fine as I am typing on it now. 
 
I upgraded to the latest firmware to see if that would fix it but it does not. 
 
From  what I can see, no matter how hard it tries, it won't grab an IPV4 or 6 IP address from my cable company. I am thinking the router just went bad on that side of the router. I hate paying for shipping back and forth when this router should of lasted as long as my old linksys that I have now and am using as a access repeater. 

View 1 Replies View Related

Linksys Wireless Router :: Bumped Off VPN When Using E2500?

Feb 28, 2013

I am trying to connect to a new VPN using my E2500 router.  As soon as I connect, the connection breaks.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Register E2500

Sep 3, 2012

i buy a new e2500 from staples. but when i try to register the product. it shows me  "Serial Number you entered is invalid.".  i am sure i choose the right product and number to register.. so is that mean some one used it..

View 3 Replies View Related

Linksys Wireless Router :: Adding E2500 As Second Set-up

Dec 18, 2012

I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.

View 9 Replies View Related

Linksys Wireless Router :: How To Reset E2500

Nov 23, 2011

How To Reset E2500 Router

View 1 Replies View Related

Linksys Wireless Router :: Setup A WAP With E2500?

Jan 23, 2012

I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.

View 1 Replies View Related

Linksys Wireless Router :: Why Need To Keep Resetting E2500

Nov 18, 2011

So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection. 

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved