Linksys Cable / Dsl :: How To Setup Wag120n As Wifi Repeater

Mar 11, 2012

I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.

View 1 Replies


Linksys Cable / DSL :: WAG120N Working With A Repeater?

Apr 5, 2013

what do i need to setup in WAG120N to work with a Wireless Network repeater?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N No Access To Setup

Oct 3, 2011

1) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.

View 1 Replies View Related

Linksys Cable / DSL :: Can't Seem To Setup WAG120N Modem

Nov 27, 2011

I can't seem to setup my WAG120N modem.I kept on getting the error "your ethernet cable does not appear to be connected properly" even though I have connected all the cables correctly. I can access the modem through the browser via though.I thought the setup is supposed to be simple but I have wasted few hours.

View 1 Replies View Related

Linksys Cable / Dsl :: Wifi On Wag120n Stopped Working?

Mar 26, 2012

Like the title says, the wifi on my wag120n stopped working. It happened suddenly, nothing was changed in the settings. It stopped showing when i'm searching for wireless connections (SSID is still enabled).

View 3 Replies View Related

Linksys Cable / Dsl :: Wag120n Wifi Range Is Too Short

Jul 10, 2011

Just got a WAG120N modem/router , everything is set up and works fine.But I am very disappointed with its wifi range.After using an iPhone and a PSP , I found that, its range is 1,80 meters only, in empty room.Is it faulty ? I cant believe its range is too short although I know that its not "enhanced speed & range" as typed on box.I tried all combination of channels/protocols with no success and it's already flashed on latest version. I really cant connect to my wifi devices.

View 2 Replies View Related

Linksys Cable / Dsl :: Wag120n - Wifi Led Blinks Continuously And Uniformly

Jul 31, 2011

I have a WAG120N, its nearly dead,I tried resetting it many times, it still wouldn't work. The WiFi LED blinks continuously  and uniformly. There is no WiFi, no access to router, the only thing that is working is the switch.

View 4 Replies View Related

Linksys Cable / Dsl :: Wag120n - Device Don't Connect To Wifi Network

May 25, 2011

I have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:

-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.

View 6 Replies View Related

Linksys Cable / Dsl :: Wag120n Wifi Disconnect Until Restart Router

Jan 1, 2013

I have a linksys WAG120N router updated to 1.00.16and I have Wi-Fi problems that while I use Wi-Fi on my laptop or mobile then the Wi-Fi disconnected (wifi on router still green but i can't connect ) until i restart router.

View 7 Replies View Related

Wifi Repeater Setup And Operation?

Aug 16, 2012

I have a wireless access point/modem at one end of my property (which I cannot relocate). To improve wireless connectivity on the other end of the property I am thinking of placing a wifi repeater (probably a cheap one like http:[URL]... mid-point in the property. However I don't quite understand how these things work. I assume repeaters, extenders, boosters are all the same thing?

Does the repeater actually create a new seperate wifi network, so I will effectively have two wifi networks/SSIDs? or will my wireless devices still see only one wifi network? If it creates two wifi networks what happens when I move through the property with say a laptop, will the laptop need to disconnect from one and reconnect to the other hence interrupting the connection? (which is not ideal).

Also does the repeater take up an IP from my main wireless access point/modem? My setup uses a block of static IPs and hence I would prefer not to waste an IP on the repeater if possible.Homeplugs is something else I'm looking into but that seems to be a more expensive option. With Homeplugs I would disable the wireless on the main access point/modem. Then use the Homeplug to put a wireless access point in the centre of my property hence giving fuller coverage.I've also tried higher DBi antennas (& directional ones) but they have not been effective.

View 1 Replies View Related

Linksys Cable / DSL :: Disable WPS On WAG120N?

Aug 24, 2012

Is there any way to disable WPS feature on my WAG120?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Install

Mar 31, 2011

Just bought this WAG120N and using the CD Setup it gets as far as Install Gateway then displays its not connected properly. Checked everything it says to check.Im swapping from an ordinary adsl modem but i unplugged all of that and the WAG120N shows steady Power , 1 ethernet number lit and flashing ok,  Wireless is lit and DSL is also also lit.   Rebooted a few times too.

View 1 Replies View Related

Linksys Cable / DSL :: How To Set Up WAG120N As A Router Only

Jul 20, 2011

How do I set up the WAG120N as a router only as I no longer want to use it as modem and router?I want to connect the WAG120N thru a cable to a modem that will make the internet connection and use the WAG120N as a wireless router only.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - Want Public IP On PC

Apr 19, 2012

I have a WAG120N modem-router.What i want is to have my public IP on my pc.So... just 1 pc with 1 ip... but whatever i do... nothing works.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Can't Login To It And Its Quite Hot

Mar 27, 2011

I've got a new WAG120N which seems to lock up about every 24 hours. All the lights are on except the wireless light goes out. Can't login to it and its quite hot.

View 3 Replies View Related

Linksys Cable / DSL :: Connecting Laptop To WAG120N?

Jul 22, 2011

problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Ports Won't Open?

May 14, 2012

normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
if i do  hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model :  WAG120N

View 1 Replies View Related

Linksys Cable / DSL :: Configure WAG120N As Bridge?

Jan 31, 2012

I need to configure a WAG 120 N  as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Airprint To HP Printer

Jan 24, 2011

My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer.  When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print.  Enable the Linksys router and the printer is no longer found on the ipad.  other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?

View 3 Replies View Related

Linksys Cable / DSL :: Slow Internet On New WAG120N

Oct 24, 2010

I have a WAG120N which runs at 0.1 Mbs. My old router used to get 6 Mbs.I have tried a firmware update & reset, reduced the MTU to 1300 but still no different.Windows Vista & 7 - two different computers, same speed...

View 6 Replies View Related

Linksys Cable / DSL :: Port 80 Does Not Work On DMZ With WAG120N

Nov 22, 2011

I configured my router Linksys WAG120N as DMZ, but  not forward port 80, only port 80.

View 1 Replies View Related

Linksys Cable / DSL :: No N Network Connection With WAG120N?

Mar 22, 2011

when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode.

View 4 Replies View Related

Linksys Cable / DSL :: WAG120N Keeps Disconnected From Internet

Apr 18, 2010

I am using WAG120N, and it keeps disconnected from internet randomly, normally between 5-10 minutes. The thing is, when it is disconnected, the adsl lamp is still on, so I think that it is not the network problem. When internet lamp turns off , I try to turn off the device (or unplug the phone cable), then turn it on again (or re-plug the cable), and it will work for certain minutes, then gets disconnected again. I already upgraded the firmware to v 1.00.12. 

View 4 Replies View Related

Linksys Cable / DSL :: How To Configure WAG120N As A Modem

Apr 18, 2013

I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500

View 2 Replies View Related

Linksys Cable / DSL :: WAG120N Red Power Light

Apr 4, 2012

My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !

View 3 Replies View Related

Linksys Cable / DSL :: Bridge Mode On WAG120N

Apr 24, 2013

I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to and I want my router on bridge mode do I set on my wag? Do I need a crossover cable?

View 1 Replies View Related

Linksys Cable / DSL :: ADSL Sync With WAG120N

Aug 23, 2011

After the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.

View 1 Replies View Related

Linksys Cable / DSL :: Does WAG120N Support IPv6

Dec 16, 2011

Does WAG120N Support IPv6 ?

View 1 Replies View Related

Linksys Cable / DSL :: Wag120n Can't See Other Connected Computers

Jul 1, 2011

I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.

View 2 Replies View Related

Linksys Cable / DSL :: Use Two WAG120N As Roaming WLAN?

Jan 31, 2011

We have a customer who has a WAG120N as their broadband wireless router, and we've sold them some new equipment, part of which is another WAG120N as our salesperson didn't realise they had one.They have a section of the building which the current WAG120N will not reach. Reading around this forum, it seems that I can give the second WAG120N a different static IP on the LAN and use it to expand the range of the WLAN.If I've read correctly, I need to make all the wireless stuff exactly the same except to use different wireless channels on each router. But what do I do with the DHCP server on the second WAG? Is it fair to say that the clients won't suddenly jump to a different IP because they won't have a cause to request a new one? I read one comment that suggested the second should be configured for DHCP relay, and another which contradicted this. Presumably I just don't configure the ADSL on the second WAG as that will only connect to the LAN.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Keeps Disconnecting Every 40 Minutes

Dec 26, 2012

Ok so for about a week now I have a problem with router. Today I checked log of router and found sometging like this:
Wed, 2012-12-26 15:41:15 - No response to 3 echo-requestsWed, 2012-12-26 15:41:15 - Serial link appears to be disconnected.Wed, 2012-12-26 15:41:15 - Enter: tdb_store.Wed, 2012-12-26 15:41:15 - tdb_store: calling tdb_update.Wed, 2012-12-26


View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - How To Enable Web Access

Jan 20, 2012

Accidentally I disabled the modem web access therfore I am not able to open admin console from How to enable it again?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Gives Less Speed 0.15mb

Jun 4, 2011

I have BSNL Broadband with speed 512 kbps. My old modem gives me speed 0.54 mb . i have checked it on .But my new WAG120N gives me less speed 0.15mb .Why this so happen?i checked all settings

View 1 Replies View Related

Copyrights 2005-15, All rights reserved