Linksys Cable / DSL :: Disable WPS On WAG120N?
Aug 24, 2012Is there any way to disable WPS feature on my WAG120?
View 1 Replies
ADVERTISEMENT
Linksys Cable / DSL :: WAG120N Won't Install
Mar 31, 2011Just bought this WAG120N and using the CD Setup it gets as far as Install Gateway then displays its not connected properly. Checked everything it says to check.Im swapping from an ordinary adsl modem but i unplugged all of that and the WAG120N shows steady Power , 1 ethernet number lit and flashing ok, Wireless is lit and DSL is also also lit. Rebooted a few times too.
View 1 Replies View RelatedLinksys Cable / DSL :: How To Set Up WAG120N As A Router Only
Jul 20, 2011How do I set up the WAG120N as a router only as I no longer want to use it as modem and router?I want to connect the WAG120N thru a cable to a modem that will make the internet connection and use the WAG120N as a wireless router only.
View 3 Replies View RelatedLinksys Cable / DSL :: WAG120N - Want Public IP On PC
Apr 19, 2012I have a WAG120N modem-router.What i want is to have my public IP on my pc.So... just 1 pc with 1 ip... but whatever i do... nothing works.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N - Can't Login To It And Its Quite Hot
Mar 27, 2011I've got a new WAG120N which seems to lock up about every 24 hours. All the lights are on except the wireless light goes out. Can't login to it and its quite hot.
View 3 Replies View RelatedLinksys Cable / DSL :: Connecting Laptop To WAG120N?
Jul 22, 2011problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N - Ports Won't Open?
May 14, 2012normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
if i do hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model : WAG120N
Linksys Cable / DSL :: Configure WAG120N As Bridge?
Jan 31, 2012I need to configure a WAG 120 N as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.
View 3 Replies View RelatedLinksys Cable / DSL :: WAG120N Won't Airprint To HP Printer
Jan 24, 2011My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer. When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print. Enable the Linksys router and the printer is no longer found on the ipad. other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?
View 3 Replies View RelatedLinksys Cable / DSL :: Slow Internet On New WAG120N
Oct 24, 2010I have a WAG120N which runs speedtest.net at 0.1 Mbs. My old router used to get 6 Mbs.I have tried a firmware update & reset, reduced the MTU to 1300 but still no different.Windows Vista & 7 - two different computers, same speed...
View 6 Replies View RelatedLinksys Cable / DSL :: Port 80 Does Not Work On DMZ With WAG120N
Nov 22, 2011I configured my router Linksys WAG120N as DMZ, but not forward port 80, only port 80.
View 1 Replies View RelatedLinksys Cable / DSL :: No N Network Connection With WAG120N?
Mar 22, 2011when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode.
View 4 Replies View RelatedLinksys Cable / DSL :: WAG120N Keeps Disconnected From Internet
Apr 18, 2010I am using WAG120N, and it keeps disconnected from internet randomly, normally between 5-10 minutes. The thing is, when it is disconnected, the adsl lamp is still on, so I think that it is not the network problem. When internet lamp turns off , I try to turn off the device (or unplug the phone cable), then turn it on again (or re-plug the cable), and it will work for certain minutes, then gets disconnected again. I already upgraded the firmware to v 1.00.12.
View 4 Replies View RelatedLinksys Cable / DSL :: How To Configure WAG120N As A Modem
Apr 18, 2013I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500
View 2 Replies View RelatedLinksys Cable / DSL :: WAG120N Red Power Light
Apr 4, 2012My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !
View 3 Replies View RelatedLinksys Cable / DSL :: WAG120N No Access To Setup
Oct 3, 20111) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.
Linksys Cable / DSL :: Bridge Mode On WAG120N
Apr 24, 2013I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?
View 1 Replies View RelatedLinksys Cable / DSL :: ADSL Sync With WAG120N
Aug 23, 2011After the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.
View 1 Replies View RelatedLinksys Cable / DSL :: Does WAG120N Support IPv6
Dec 16, 2011Does WAG120N Support IPv6 ?
View 1 Replies View RelatedLinksys Cable / DSL :: Wag120n Can't See Other Connected Computers
Jul 1, 2011I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.
View 2 Replies View RelatedLinksys Cable / DSL :: Use Two WAG120N As Roaming WLAN?
Jan 31, 2011We have a customer who has a WAG120N as their broadband wireless router, and we've sold them some new equipment, part of which is another WAG120N as our salesperson didn't realise they had one.They have a section of the building which the current WAG120N will not reach. Reading around this forum, it seems that I can give the second WAG120N a different static IP on the LAN and use it to expand the range of the WLAN.If I've read correctly, I need to make all the wireless stuff exactly the same except to use different wireless channels on each router. But what do I do with the DHCP server on the second WAG? Is it fair to say that the clients won't suddenly jump to a different IP because they won't have a cause to request a new one? I read one comment that suggested the second should be configured for DHCP relay, and another which contradicted this. Presumably I just don't configure the ADSL on the second WAG as that will only connect to the LAN.
View 3 Replies View RelatedLinksys Cable / DSL :: WAG120N Working With A Repeater?
Apr 5, 2013what do i need to setup in WAG120N to work with a Wireless Network repeater?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N Keeps Disconnecting Every 40 Minutes
Dec 26, 2012Ok so for about a week now I have a problem with router. Today I checked log of router and found sometging like this:
Wed, 2012-12-26 15:41:15 - No response to 3 echo-requestsWed, 2012-12-26 15:41:15 - Serial link appears to be disconnected.Wed, 2012-12-26 15:41:15 - Enter: tdb_store.Wed, 2012-12-26 15:41:15 - tdb_store: calling tdb_update.Wed, 2012-12-26
[Code].....
Linksys Cable / DSL :: WAG120N - How To Enable Web Access
Jan 20, 2012Accidentally I disabled the modem web access therfore I am not able to open admin console from http://192.168.1.1. How to enable it again?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N Gives Less Speed 0.15mb
Jun 4, 2011I have BSNL Broadband with speed 512 kbps. My old modem gives me speed 0.54 mb . i have checked it on speedtest.net .But my new WAG120N gives me less speed 0.15mb .Why this so happen?i checked all settings
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N - Assign Static IP To PC?
Jan 2, 2013I have a WAG 120N Modem Router, My question is: Can you assign an static IP to a pc using this router?
View 2 Replies View RelatedLinksys Cable / DSL :: Wireless Range Of Wag120n?
Jul 7, 2011am using cisco linksys wag120n. how much length of wireless range will i get?
View 2 Replies View RelatedLinksys Cable / DSL :: WAG120n Cannot Connect To Internet
Nov 29, 2012I recently got a Linksys WAG120n wireless modem but I have a problem with its Wireless.whenever I want to connect to the wireless of the modem I have to reboot the modem. or I cannot connect to it or if I connect I do not have internet access the cable LAN interface of the modem is working is working properly.I used Mixed (b/g/n) as network mode and wpa2/psk as authentication mode with using preshared key.and the channel is 11. no matter if I enable MAC filtering for wireless or not it is just the same.my laptop is a HP G42 with a Ralink 3090 wireless card and I have installed the latest manufacturer driver of the wireless Card.but it is not working .even sometimes laptop cannot find the linksys modem until I reboot the modem.as I have found there is no newer firmwire on cisco site for this modem to upgrade.
View 1 Replies View RelatedLinksys Cable / DSL :: Can't Seem To Setup WAG120N Modem
Nov 27, 2011I can't seem to setup my WAG120N modem.I kept on getting the error "your ethernet cable does not appear to be connected properly" even though I have connected all the cables correctly. I can access the modem through the browser via 192.168.1.1 though.I thought the setup is supposed to be simple but I have wasted few hours.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N How To Set Port Forward
Mar 2, 2011I Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse, how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??
View 4 Replies View RelatedLinksys Cable / DSL :: WAG120N - Open Nat Type
Nov 20, 2011I have the WAG120N, and I play Xbox online. I have tried so many things to get an open nat type, but the best i can get is moderate.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N And AE1000 PC Bus Signal Is Low
Jul 11, 2012i have a problem whit Modem Router WAG120N and linksys AE1000 router is 5 meter my pc bus signal is low
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N Firmware 1.0.0.16 Bugged
Jul 4, 2011 I just upgraded my WAG200G for WAG120N (I'm brazillian and its the latest model here). The modem/router came with 1.0.0.7 or 8 firmware - i actually don't remind - and I upgraded to 1.0.0.16, which is the latest made by Linksys/Cisco. At this point I started testing the modem/router and I started getting problems. The range isn't as good as the older WAG200G. In my house I have 3 laptops, an AzBox Premium+ and an Xbox 360 S (the slim version which has wifi built-in) to connect to the WAG120N by WIFI. The 2 desktops are wired connected.Everything seemed to be working perfect for I was just testing the 2 wired computers first. The second task I had to do was configure the Xbox 360 wifi connection. The Xbox is less than 6 meters from the WAG120N and the signal just. But thats OK, at least the console recognizes the network and I would soon be playing again - what I thought. But I was wrong. Despite the console recognizes the network, it was just impossible to connect. I spend 2 days to figure out why all Laptops could connect to WAG120N and the Xbox 360 couldn't.
Xbox 360 detect but don't connect. I expected that somewhere I would find the answer but I couldn't. Luckily I had a click on my mind when I was at a Microsoft website looking the list of routers that supports the Xbox 360S. That list had 2 parameters, the modem name and firmware version. Yeah, "WAG120N / 1.0.0.11". It was really hard to believe that all around the world people have the same problem I was having and the solution was something so. but for the Linksys developers who destroyed the modem with bad firmware programming.Then I started to search where I would find the WAG120N 1.0.0.11 firmware just to give my idea a try. Unfortunately, there wasn't any website from which I was able to download that firmware. But I found the 1.0.0.12 firmware somewhere and make the firmware downgrade. Yeah, my Xbox 360 S could, after 2 days, finally be connected to the wireless network and I was able to play online and achieve gamerscore points again.
Even though I was able to play, the Xbox had a problem when connecting to the Xbox Live. Hopefully, this time, the Xbox 360 could tell me what was wrong. The console displaied a message saying my NAT was Moderated and I should configure my router and change the Moderated to Open, something like that. The problem is that the WAG120N doesn't have any options beyond Enable or Disable the NAT thing ( which particularly I didn't searched what it is yet). It means that I will have an unstable connection when playing. I have configured my Xbox to manually connect and I opened all the doors people said would enhance the Live connection and nothing worked.The other problem was the signal range. I don't know if it can be caused for the bugged firmware, didn't tried to see if the 1.0.0.16 firmware has some improvements over this, but the signal range just . I don't know how much newer this WAG120N is when compared to the WAG200G, but it can't be possible this newer modem has low signal range. I mean, my home is just a standard apartment. Signal should be at least normal every place.I don't know if the developer team fix firmwares based on what we say here on forum or it I'll have to email them, but if I could ask something for the new 1.0.0.17 firmware is that you, for the love of god, may this firmware Xbox 360 compatible, as the later versions was. Ah, just to remind, its not just an Xbox 360 problem, another member of this forum said this same problem appeared not just in his Xbox 360, but his laptop too.