Linksys Wireless Router :: How To Use 2500 With Huawei Ws320 Wifi Repeater
Jun 12, 2012
I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies
ADVERTISEMENT
Feb 19, 2013
Just purchased a WS320 repeater so that my son can use his I-phone and I-pad around the house when he comes home weekends.Sadly, when the repeater is connected to my router the internet drops out on even my wired connections.I recently connected up to fibre and notice that the new router has the same gateway as the repeater.
View 7 Replies
View Related
Nov 30, 2011
is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist?
View 3 Replies
View Related
Dec 4, 2011
That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...
View 1 Replies
View Related
Nov 10, 2011
I picked a threeHUAWEI E586, but after that i found this on mobile2wifi.co.uk that's fully unlocked, so that i wanna to do unlocked solution for mine, it could be compatible with more network
View 2 Replies
View Related
Nov 10, 2012
I have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
View 1 Replies
View Related
Oct 15, 2012
I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.
View 1 Replies
View Related
Jan 31, 2013
Cannot set up 2500 router
View 8 Replies
View Related
Jan 26, 2011
I Echolife 520b, can not enable wireless network in the menu Basic Wireless LAN option is missing
View 1 Replies
View Related
Feb 8, 2012
I purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.
View 1 Replies
View Related
Oct 17, 2012
I just moved into a new place with a DSL modem and am using the connection from the old tenant until my internet gets set up a while from now. I can plug the ethernet straight from the modem into either my laptop or desktop, and it works perfectly fine. But when I plug into my LinkSys 2500 router, it can't connect. I've tried rebooting the router, the router and the modem, plugging the modem back in first, plugging the router back in first. Nothing. But all I have to do is pull the ethernet cable from the internet port and click it into my laptop, and voila! internet. My name isn't on the account so I can't call the ISP and see if there are any special connection instructions, but I suspect there aren't any based on just being able to plug a computer straight into it.
View 4 Replies
View Related
Dec 27, 2011
I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites. In my WRT54GS I could just create additional rules and they would work. But in this device I am limited on the sites that can be blocked per device. How I can block additional sites?
View 2 Replies
View Related
Jun 27, 2012
I have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router. As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200. My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.
View 6 Replies
View Related
Feb 14, 2012
I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites. In my WRT54GS I could just create additional rules and they would work. But in this device I am limited on the sites that can be blocked per device. How I can block additional sites?
View 1 Replies
View Related
Mar 11, 2012
I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies
View Related
Apr 8, 2013
I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies
View Related
Apr 12, 2011
I am trying to use a NETGEAR 54Mbps Wireless ADSL2+ Modem Router (Model DG834G v4) as a repeater to extend the WiFi I currently have off another NETGEAR router in my house to my office which is a seperate building in my backyard (75 feet away depending on where I place my router exactly).I've scoured the vast internet for specifics with this particular router. I am fairly well versed in computer-type verbage and usage, but networking is an alien language to me.
View 1 Replies
View Related
Sep 4, 2012
make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies
View Related
Feb 22, 2008
is it possible to use the WRT54GR as a repeater ? I have a WAG54GX2 and wish to use 2 WRT54GR's as repeaters
View 9 Replies
View Related
Jan 4, 2012
Is it possible to use a Linksys E1200 as a repeater? If so, how do I set it up?
View 3 Replies
View Related
Aug 15, 2012
I have an E2500 wireless N router that I recently bought to replace a cheapie netgear that I lent to family. The router is in the basement near a bunch of metal ducting and I live near a radio station, both of which I believe is killing my signal. Anyways, I was able to pick up a WAP54G wireless access point. I would like to use it as a wired repeater (hopefully to get the signal up into the upper levels of my house). Can I use the WAP54G with the E2500? I looked in the setup page when I was trying to set it up as a repeater, and it says it will only connect with another WAP54G or a WRT54G (linksys wireless g router).
View 6 Replies
View Related
May 8, 2012
I bought the e4200v2 and would like us my old router wrt-160nv2 as a Repeater can I do this.
View 5 Replies
View Related
Jul 10, 2011
My house is a little too big for my WRT160N v3 to be able to get to every room, so i was wondering if i could set up my old WRH54G as a repeater to get that extra distance to get those last room on the network? if so how to set up the connection?
View 1 Replies
View Related
Jan 17, 2013
I have EA4500 router that connects a couple of desktops in one room. I am having to setup another room for gaming for which I have another EA4500 router. I want to setup the second EA4500 uplink(accesspoint) as the first EA4500. I dont find any interface to do it. I am able to do it wired(by connecting the both the routers through LAN ports). but I dont want to run cable across the house. know if it is possible with another firmware. Or should I return this new EA4500 and buy another router?
View 2 Replies
View Related
Jan 25, 2012
I use my e2000 as router and want to use the e4200 as repeater. so if i connect wireless to my e4200 i can see all my devices also the one on the e2000. How to setup the e42000 ?
View 5 Replies
View Related
May 16, 2012
I have a Linksys E1550. I would like to extend its range by using an old Netgear N600 I have laying around. I know the Netgear can be used as a repeater. I do not know what settings I need to change in my Linksys router to be able to use a repeater.
View 5 Replies
View Related
Jun 2, 2011
I have set my WAP54G up as a repeater for my E2000 but the signal for Guest access is only about 1/2 of the strength of the signal for my network. Is there a way to boost the signal for Guest access?
View 2 Replies
View Related
Nov 21, 2012
My wife just was using our 4200N router fine this morning. I went to try and use the internet and it was not working. I can connect my PC directly to the modem and works fine as I am typing on it now.
I upgraded to the latest firmware to see if that would fix it but it does not.
From what I can see, no matter how hard it tries, it won't grab an IPV4 or 6 IP address from my cable company. I am thinking the router just went bad on that side of the router. I hate paying for shipping back and forth when this router should of lasted as long as my old linksys that I have now and am using as a access repeater.
View 1 Replies
View Related
Oct 28, 2012
I have recently purchased a Wireless-N repeater which is now up and running and connects with both Ipad, iPhone and other laptops with ease. The problem is that I can't connect using my own PC. I'm using Windows Vista and the connection to the repeater seems fine, it just can't connect to the Internet. Every time I try and open a web page I receive the following message.Error 105 (net:ERR_NAME_NOT_RESOLVED) Unable to resolve the servers DNS address.
View 7 Replies
View Related
Apr 20, 2012
I currently own 2 wifi routers which have 4 lan ports on the back. In my room i have two desktops without wireless capability. I was wondering is it possible to have one router in my room which my desktops plug into - and then the router to ""Bridge" with the one downstairs to give me wireless capability. I believe its called bridging but i have had no hopen as of yet. Huawei HG520b and Huawei HG532 are my two routers. I know this can be done by purchasing a wire - but i cannot afford a 100m cable and i am not particularly interested in purchasing an adapter for my desktops.
View 6 Replies
View Related
Dec 28, 2012
Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.
View 2 Replies
View Related
Aug 3, 2011
We have a wireless network and would like to extend the range for it and I was told that a E2000 could be setup to extend the range.If we say that our existing wireless network has the SSID network1, can the E2000 be setup so that it is connected to a LAN socket and then wok as a wireless runter with the same SSID (network1) so that pc's can connect easily ?Or must the two wireless routers be connected with a dedicated cable ?Or must I setup the new E2000 up as a new wireless network with a new SSID like network2 ?
View 3 Replies
View Related
Oct 11, 2012
Can I use the WIRELESS 150 ROUTER DIR-600 as repeater or WLAN range extender?
View 1 Replies
View Related