Linksys Wireless Router :: E-2500 IPhone Will Not Log On
Feb 8, 2012I purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.
View 1 RepliesI purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.
View 1 RepliesCannot set up 2500 router
View 8 Replies View RelatedI just moved into a new place with a DSL modem and am using the connection from the old tenant until my internet gets set up a while from now. I can plug the ethernet straight from the modem into either my laptop or desktop, and it works perfectly fine. But when I plug into my LinkSys 2500 router, it can't connect. I've tried rebooting the router, the router and the modem, plugging the modem back in first, plugging the router back in first. Nothing. But all I have to do is pull the ethernet cable from the internet port and click it into my laptop, and voila! internet. My name isn't on the account so I can't call the ISP and see if there are any special connection instructions, but I suspect there aren't any based on just being able to plug a computer straight into it.
View 4 Replies View RelatedI recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites. In my WRT54GS I could just create additional rules and they would work. But in this device I am limited on the sites that can be blocked per device. How I can block additional sites?
View 2 Replies View RelatedI have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router. As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200. My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.
View 6 Replies View RelatedI recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites. In my WRT54GS I could just create additional rules and they would work. But in this device I am limited on the sites that can be blocked per device. How I can block additional sites?
View 1 Replies View RelatedI have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies View RelatedI'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?
View 3 Replies View RelatedMy laptop connects fine, so I know it is working, but I cannot get my IPhone to connect. I keep getting an error message stating "Incorrect Password" but I know the password entered is correct.
View 9 Replies View RelatedHow can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.
View 2 Replies View RelatedAll networking had been working great until recent power failure. Then laptops failed to connect, found my router WRT54G had become insecure. I open the router using "admin", reset Wireless Security and reset my password. Wireless laptops, wireless camera now works fine but now iPhone will not connect? I have double checked the password, it is the same as the router. Is there something else in the router that needs changing for the iPhone connection?
[code]...
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
View 1 Replies View RelatedWhen I first set up my router, I used the same user name and pw as I had for my old router and my iPhone connect just fine. I decided to use the guest network after one of my sons friends was sitting outside one morning using my network. I told the friend the pw for the guest and changed the pw for my network and created an key on a thumb drive. Now I cannot connect my iphone. When I try to use guest is seems to work ok, but I want to use my network. I chose my network on my iphone and it simply says unable to connect. That is the only info/choice I am given.
View 1 Replies View RelatedI have an E1000 wireless N router. My husband set up all of the original configuration when we purchased it. I have no problem with my laptop. I want to use my Iphone and Blackberry for wifi use. I find the network on my iphone but it requests IP address, router, etc. information. The Iphone is a 3g.
View 1 Replies View RelatedI recently purchased an E4200, but I am experiencing slow/inconsistent performance and connection problems with iPhone 3G, 3GS and 4. The iPhones are running the latest firmware 4.3. The E4200 has also been updated to the latest firmware 1.0.01 build 10. I do not experience these problems with various laptops, and I did not experience them with a previous Cisco router WRT610N, nor with a D-link DIR825 in another location. The security is set to WPA2 Personal and all the other settings are the same from the prior router. If I disable the security, I do not experience the connection problems, but still experience the slow performance. If I switch back to the WRT610N, I do not experience any problems. this a E4200 firmware issue yet to be resolved?
View 9 Replies View RelatedI have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house.
View 1 Replies View Relatedi got my ps3 & xbox to connect it was easy but when i go to connect my iphone it doesnt even let me put my password in it just says"cant connect"?
View 3 Replies View RelatedMy BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
View 1 Replies View RelatedI recently connected E1500 to time wanrner cable modem for my home. 3 laptops work fine, but iphone and ipad can not connect to wireless. But iphone and ipad connected to linksys guest automatically.
View 4 Replies View RelatedI just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies View RelatedWhen I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a driver.how to locate and install updates to driver for E2500 to allow connection to iPhone 4S?
View 2 Replies View Relatedmy iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies View RelatedI have a WRT54G ver 6 router.My face-time will work everywhere but NOT at home!
View 9 Replies View RelatedI am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.
View 2 Replies View RelatedI cannot get my iPhone 5 to access my wireless network (Linksys E4200) since I reset the router. It asks for the password but doesn't accept it. I'm a newbie so be gentle with me! MSZ
View 2 Replies View RelatedMy Iphone 5 will not remember the password for my wrt54g .
View 2 Replies View RelatedI have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
View 9 Replies View RelatedI have a E4200 fw 1.0.03 my pc, laptop connect to E4200 is OK but have a problem with my iphone 3Gs iPhone 3Gs connect to E4200 at day is OK althought sometime loss packet but at night (after 17:30) iPhone can't connect to E4200, althought I don't config anything.This is my E4200 configure fw: 1.0.03 No set schedule access internet
At Day This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Day Sun, 04 Dec 2011 07:11:00 received REQUEST from 00:26:bb:fb:29:a0 Sun, 04 Dec 2011 07:11:00 sending ACK to 192.168.1.136 get IP very fast ping packets at day (loss some packets):
But at Night everything change althought I don't config anything on e4200This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Night Sat, 03 Dec 2011 22:11:20 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:22 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:27 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:28 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:31 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:31 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:32 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:32 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:34 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:34 sending ACK to 192.168.1.135
Very difficult to get IP from e4200 at night, sometimes getting IP but not on the Internet, sometimes can not get IP and iPhone get message "unable to join the network "ciscoTNTn""ping packets at night (can't ping):
While iPhone is connected to the Draytek Vigor2600VG good no matter day or night.I re-upgrade fw 1.0.03 and restore factory defaults but still not fixed.Is that a bugs ?
all other devices have excelent signal
View 5 Replies View RelatedMy e4500 seems to be blocking my nhl gamecenter apps from playing live video on Ipad and I phones..nhl support tells me it is setting in router.?
View 6 Replies View RelatedI purchased a Cisco 1750 router. I was able to access my cameras from my iPhone before I setup this router. Now I can get my cameras to work. I need to setup port 80. I followed the instructions on how to do it but for some reason the cameras do not work on my iPhone.
View 1 Replies View RelatedJust bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies View RelatedI am trying long distance to set up above router. Router communicates fine with laptop and wifi printer but when she tries to connect her iphone (I think iphone4), phone states that password is incorrect. She is using the same password that she used for the printer and laptop which is the router default one which is a series of mixed numbers and letters.
View 1 Replies View Related