I purchased a Cisco 1750 router. I was able to access my cameras from my iPhone before I setup this router. Now I can get my cameras to work. I need to setup port 80. I followed the instructions on how to do it but for some reason the cameras do not work on my iPhone.
View 1 RepliesA external scan has reviled that I have an open port. For security reasons I want to close it. I do know the port number.
View 7 Replies View RelatedI want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 1 Replies View RelatedHow to open port 443 on my wireless router model WRT54G3G-AT? For a secure business connection. Plese don't give me a link to follow, I've tried that one.
View 1 Replies View RelatedI'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedHave a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.
- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled UPnP
- tried cisco & buffalo tech support
I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedI am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.
View 5 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedI purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.
View 1 Replies View RelatedI'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?
View 3 Replies View RelatedMy laptop connects fine, so I know it is working, but I cannot get my IPhone to connect. I keep getting an error message stating "Incorrect Password" but I know the password entered is correct.
View 9 Replies View RelatedHow can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.
View 2 Replies View RelatedAll networking had been working great until recent power failure. Then laptops failed to connect, found my router WRT54G had become insecure. I open the router using "admin", reset Wireless Security and reset my password. Wireless laptops, wireless camera now works fine but now iPhone will not connect? I have double checked the password, it is the same as the router. Is there something else in the router that needs changing for the iPhone connection?
[code]...
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
View 1 Replies View RelatedWhen I first set up my router, I used the same user name and pw as I had for my old router and my iPhone connect just fine. I decided to use the guest network after one of my sons friends was sitting outside one morning using my network. I told the friend the pw for the guest and changed the pw for my network and created an key on a thumb drive. Now I cannot connect my iphone. When I try to use guest is seems to work ok, but I want to use my network. I chose my network on my iphone and it simply says unable to connect. That is the only info/choice I am given.
View 1 Replies View RelatedI have an E1000 wireless N router. My husband set up all of the original configuration when we purchased it. I have no problem with my laptop. I want to use my Iphone and Blackberry for wifi use. I find the network on my iphone but it requests IP address, router, etc. information. The Iphone is a 3g.
View 1 Replies View RelatedI recently purchased an E4200, but I am experiencing slow/inconsistent performance and connection problems with iPhone 3G, 3GS and 4. The iPhones are running the latest firmware 4.3. The E4200 has also been updated to the latest firmware 1.0.01 build 10. I do not experience these problems with various laptops, and I did not experience them with a previous Cisco router WRT610N, nor with a D-link DIR825 in another location. The security is set to WPA2 Personal and all the other settings are the same from the prior router. If I disable the security, I do not experience the connection problems, but still experience the slow performance. If I switch back to the WRT610N, I do not experience any problems. this a E4200 firmware issue yet to be resolved?
View 9 Replies View RelatedIm using a Linksys E4500 wireless router behind a Motorola SB6121 modem. My OS is Windows 7 and it is fully up to date. In general my entire network is working well. Now I have purchased a new IP surveillance camera and need to forward a port to be able to have remote viewing of the camera. Mi ISP blocks quite a few inbound ports including 80 so I have been trying a lot of ports all over the map to find something that will allow inbound access.
After several hours, nothing I have tried works, using a couple of different port probes including one called CanYouSeeMe I always get a "timed out" message. I have disabled the firewall in the router and on the local computer and still no luck. This says to me that either Cox is blocking nearly all ports (doubtful) or the modem is blocking access to the router somehow.
The Surfboard modem doesn't have a built in router. Unfortunately I don't have an old working modem to put in the circuit.
I don't guess it matters but the camera is accessible from all other local computers on the LAN using its IP address with a port number appended (right now it's using 8000).
I have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house.
View 1 Replies View Relatedi got my ps3 & xbox to connect it was easy but when i go to connect my iphone it doesnt even let me put my password in it just says"cant connect"?
View 3 Replies View RelatedMy BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
View 1 Replies View RelatedI recently connected E1500 to time wanrner cable modem for my home. 3 laptops work fine, but iphone and ipad can not connect to wireless. But iphone and ipad connected to linksys guest automatically.
View 4 Replies View RelatedI just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies View RelatedWhen I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a driver.how to locate and install updates to driver for E2500 to allow connection to iPhone 4S?
View 2 Replies View Relatedmy iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies View RelatedI have a WRT54G ver 6 router.My face-time will work everywhere but NOT at home!
View 9 Replies View RelatedI am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.
View 2 Replies View RelatedI cannot get my iPhone 5 to access my wireless network (Linksys E4200) since I reset the router. It asks for the password but doesn't accept it. I'm a newbie so be gentle with me! MSZ
View 2 Replies View RelatedMy Iphone 5 will not remember the password for my wrt54g .
View 2 Replies View RelatedI have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
View 9 Replies View RelatedI have a E4200 fw 1.0.03 my pc, laptop connect to E4200 is OK but have a problem with my iphone 3Gs iPhone 3Gs connect to E4200 at day is OK althought sometime loss packet but at night (after 17:30) iPhone can't connect to E4200, althought I don't config anything.This is my E4200 configure fw: 1.0.03 No set schedule access internet
At Day This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Day Sun, 04 Dec 2011 07:11:00 received REQUEST from 00:26:bb:fb:29:a0 Sun, 04 Dec 2011 07:11:00 sending ACK to 192.168.1.136 get IP very fast ping packets at day (loss some packets):
But at Night everything change althought I don't config anything on e4200This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Night Sat, 03 Dec 2011 22:11:20 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:22 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:27 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:28 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:31 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:31 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:32 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:32 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:34 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:34 sending ACK to 192.168.1.135
Very difficult to get IP from e4200 at night, sometimes getting IP but not on the Internet, sometimes can not get IP and iPhone get message "unable to join the network "ciscoTNTn""ping packets at night (can't ping):
While iPhone is connected to the Draytek Vigor2600VG good no matter day or night.I re-upgrade fw 1.0.03 and restore factory defaults but still not fixed.Is that a bugs ?
how do i open port 22 in my router
View 1 Replies View Related