Linksys Wireless Router :: E1000 - Iphone 4S Can't Connect To PW Protected Net
Nov 18, 2011
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
I have an E1000 wireless N router. My husband set up all of the original configuration when we purchased it. I have no problem with my laptop. I want to use my Iphone and Blackberry for wifi use. I find the network on my iphone but it requests IP address, router, etc. information. The Iphone is a 3g.
I'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?
All networking had been working great until recent power failure. Then laptops failed to connect, found my router WRT54G had become insecure. I open the router using "admin", reset Wireless Security and reset my password. Wireless laptops, wireless camera now works fine but now iPhone will not connect? I have double checked the password, it is the same as the router. Is there something else in the router that needs changing for the iPhone connection?
When I first set up my router, I used the same user name and pw as I had for my old router and my iPhone connect just fine. I decided to use the guest network after one of my sons friends was sitting outside one morning using my network. I told the friend the pw for the guest and changed the pw for my network and created an key on a thumb drive. Now I cannot connect my iphone. When I try to use guest is seems to work ok, but I want to use my network. I chose my network on my iphone and it simply says unable to connect. That is the only info/choice I am given.
My BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
When I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a driver.how to locate and install updates to driver for E2500 to allow connection to iPhone 4S?
I have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
I have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
I have Linksys configured with IP 192.168.0.x and my local network ip 192.168.1.x have firewall connected to Adtrans box that gives us internet access via T1 line and other port is connected to the switch. Wireless router is connected to the switch using internet port.I can connect to wireless using iphone but emails don't work when connected to wireless. I tried to connect laptop to wireless is does not connect.
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now.
My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely. The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
I own an E1000. It is hooked up to a Motorola cable modem via Comcast. I have a personal website sohebvahora.com (still under construction) where I use cpanel to administer it. I somehow lost all connectivity to my website midday and have not been able to connect back to it in a few days. Every other site I have gone to works except mine. It doesn't make sense.Also, I tried connecting my laptop directly to the Motorola modem and my personal site loads, so it has to be the router. I have tried different devices connected to the router as well, like my ipad, iphone, and other laptops, but the website doesnt load on them either
I have a Cisco E1000 wireless N router. It is working fine. I have just completed wiping my HD and reinstalling WinXP and other software. But I also need Cisco Connect. It appears the only way to get it installed is to run the Cisco Setup program. But since the router is working fine, I don't want to mess with the setup. Is there any way to get Cisco Connect by download? Or get it off my install CD without running the setup program?
I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password. If I don't change it - I can not use Cisco Connect app. If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
Connected my Dell laptop to the E1000 using the enclosed disk, easy install and no problems with wireless connection. Created a USB via the install disk to connect the Dell desktop (XP pro SP3). When running installing received error pop up "installation not compete" contact Linksys support for assistance. Disabled all internet connections and tried a manual installation but failed. Should I just purchase a wireless USB addapter?
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.