Linksys Wireless Router :: E1000 Cannot Connect To Internet
Aug 3, 2011
Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely. The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
View 2 Replies
ADVERTISEMENT
May 28, 2012
cannot conect to the internet with my e1000 wirele
View 1 Replies
View Related
Sep 3, 2011
I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?
View 1 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Oct 1, 2010
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies
View Related
Jun 10, 2011
My modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.
View 3 Replies
View Related
Dec 14, 2011
I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
View 6 Replies
View Related
Mar 26, 2012
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
View 2 Replies
View Related
Sep 21, 2011
So here is the issue:
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
View 1 Replies
View Related
Jan 28, 2012
However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now.
View 5 Replies
View Related
Feb 15, 2013
My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
View 4 Replies
View Related
Jul 10, 2012
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
View 1 Replies
View Related
Mar 30, 2011
I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies
View Related
Nov 18, 2011
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies
View Related
Dec 3, 2011
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
View 2 Replies
View Related
Oct 27, 2011
I own an E1000. It is hooked up to a Motorola cable modem via Comcast. I have a personal website sohebvahora.com (still under construction) where I use cpanel to administer it. I somehow lost all connectivity to my website midday and have not been able to connect back to it in a few days. Every other site I have gone to works except mine. It doesn't make sense.Also, I tried connecting my laptop directly to the Motorola modem and my personal site loads, so it has to be the router. I have tried different devices connected to the router as well, like my ipad, iphone, and other laptops, but the website doesnt load on them either
View 7 Replies
View Related
Apr 16, 2013
E1000. Setup Acer laptop with router and it is working fine. However I do not have Cisco Connect on the computer. I would like to use it to connect other devices etc.
View 1 Replies
View Related
Mar 25, 2012
I have a Cisco E1000 wireless N router. It is working fine. I have just completed wiping my HD and reinstalling WinXP and other software. But I also need Cisco Connect. It appears the only way to get it installed is to run the Cisco Setup program. But since the router is working fine, I don't want to mess with the setup. Is there any way to get Cisco Connect by download? Or get it off my install CD without running the setup program?
View 2 Replies
View Related
Jun 24, 2012
The printer seems to recognize the wifi but won't connect, even tho I am following instructions to hold down the WPS key before clicking "OK" on the printer.
View 1 Replies
View Related
Apr 1, 2011
Installed wireless Linksys E1000 set up and Connectivity excellent. Explorer won't connect for internet?
View 1 Replies
View Related
Jun 30, 2011
my brand new Linksys E1000 wireless router. I am really struggling and cannot figure out what I am doing wrong.
I live in The Netherlands, have a modem (DSL I think...) and can connect wired through the modem with no problems.
I installed the E1000 with the CD, followed all the steps and my laptop is finding the network. However, it's only local, no internet and I don't understand why. Have tried to connect (wired) my computer to the E1000 and the E1000 to the modem but that doesn't work either.
View 2 Replies
View Related
Oct 19, 2012
Every two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.
Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP
View 2 Replies
View Related
Feb 12, 2012
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password.
If I don't change it - I can not use Cisco Connect app.
If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
View 5 Replies
View Related
Dec 7, 2011
Connected my Dell laptop to the E1000 using the enclosed disk, easy install and no problems with wireless connection. Created a USB via the install disk to connect the Dell desktop (XP pro SP3). When running installing received error pop up "installation not compete" contact Linksys support for assistance. Disabled all internet connections and tried a manual installation but failed. Should I just purchase a wireless USB addapter?
View 1 Replies
View Related
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Dec 19, 2012
I got a refurbished E1000, has been great.
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it. NOW my HP laptop shows my router connected, BUT will not access internet.
View 3 Replies
View Related
Jul 13, 2011
Why my internet was so slow .90mbps. They got on my mac and changed the Ethernet setting to "manually" instead of "Automatic", then changed the speed to 10mbps instead of "autoselect". Now the internet is going at the 10mbps im supposed to be getting, but when i plug it into my router (wall>router>laptop) i get the .90mbps again. So do i how do i change the same setting on the router?
View 1 Replies
View Related
Sep 12, 2012
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
View 2 Replies
View Related
Feb 10, 2012
I have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail.
View 3 Replies
View Related
Aug 13, 2011
I have a Cisco E1000 v2. I updated to the latest Firmware 05/25/2011Ver.2.1.02 (Build 5).
Before doing this update I did get 300mbps N speeds. Now I don’t using the same settings, it max out at 144mbps speed. Also the router only seems to get B speeds when using a channel other than 11. I did do a hard reset after the firmware update.
View 1 Replies
View Related
Jul 30, 2011
We originally set up Cisco Connect with our E1000 Lynksys Router on a laptop- that has since died. So- I wanted to set up the software on our desktop and so I put in the set-up disk. I keep getting message "We didn't find your router" even though I now have the computer linked directly by ethernet cable. I do have connectivity to internet which I set up using my "Easy set-up key" and have a strong signal. Can't get past the first router step on the set-up disk to install the program- so now do not have Cisco Connect on any computer.
View 1 Replies
View Related
Sep 2, 2011
I have a blog and website hosted by X9 Hosting. I am unable to connect to cPanel, the website, the blog, or and X9 sites.This began when saving a WordPress article in the blog. The save hung and then all connectivity through the router was lost.When using the modem (wired) I can visit the above sites. what do I need to do to gain wireless connectivity back?
View 7 Replies
View Related
Jul 26, 2010
I have the router plugged in for internet but do not know the password for the wireless connection. i am running a mac.
i have also tried using the standard admin or password as passwords to get in and am unable too.
View 9 Replies
View Related
