Linksys Wireless Router :: Error When Trying To Connect E1000 To Dell Desktop

Dec 7, 2011

Connected my Dell laptop to the E1000 using the enclosed disk, easy install and no problems with wireless connection.  Created a USB via the install disk to connect the Dell desktop (XP pro SP3). When running installing received error pop up "installation not compete" contact Linksys support for assistance. Disabled all internet connections and tried a manual installation but failed.  Should I just purchase a wireless USB addapter?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Error Code 82bd0305 E1000

Dec 9, 2010

I am treating to install a router e 1000 when I run the CD setup a get an error code 82bd0305

View 7 Replies View Related

Linksys Access Point :: WAP54G Can't Connect To Cisco E1000 - Error 22?

Mar 3, 2011

For two years I had a 2-Wire home portal from AT&T for my DSL line.  I also have DirecTV with a DVR that has an ethernet port to download video on demand from the internet.  I bought a Linksys WAP54G to use as a pass-thru to the DVR and it has worked perfectly for the entire time.  I remember that the setup was a nightmare, so I saved the settings in case I lost them.
 
when I connected the new E1000 router to a Netopia DSL modem, I decided to reconfigure the WAP to use the new router.  I recovered the configuration file and the only thing that I had to change was the MAC address for the new router which I used with the Linksys' web-based setup tool.  I used the network discovery and selected the new router. All of the settings including the router name, default gateway, and static address for the WAP54G were the same.But, when I go to the setup page for the DirecTV DVR and perform a network test, I get an OK connect to the local network, but an error22 and fail to connect to the Internet.  Of course, going to the help page on the DVR for that error only gives the lame troubleshooting such as, is the router plugged in? Is the ethernet cable connected? etc.
 
I know that when I had to set it up with the original 2-wire portal, I had a lot of tweaking to do in the advanced wireless settings.  I'm trying to setup using the WAP54G as a pass-thru bridge for DirecTV. 

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To E1000

Mar 26, 2012

I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?

View 2 Replies View Related

Linksys E1000 Router - Unable To Connect With Wireless?

Sep 21, 2011

So here is the issue:

When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.

View 1 Replies View Related

Linksys Wireless Router :: Mac Cannot Connect Via Wifi Using E1000

Jan 28, 2012

However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now. 

View 5 Replies View Related

Linksys Wireless Router :: Unable To Connect The E1000?

Feb 15, 2013

My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.

View 4 Replies View Related

Linksys Wireless Router :: E1000 Cannot Connect To Internet

Aug 3, 2011

Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required).  Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely.  The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To The Internet With E1000

May 28, 2012

cannot conect to the internet with my e1000 wirele

View 1 Replies View Related

Linksys Wireless Router :: Can't Connect To E1000 With Iphone 4

Jul 10, 2012

when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password.  instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static)  with a list of blanks for ip address, subnet mask, router, dns, etc. below that. 

View 1 Replies View Related

Linksys Wireless Router :: Connect A Network Printer To E1000

Mar 30, 2011

I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Iphone 4S Can't Connect To PW Protected Net

Nov 18, 2011

I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.

View 9 Replies View Related

Linksys Wireless Router :: Wirelessly Connect E1000 And WRT54GS?

Dec 3, 2011

I currently have an E1000 connected to my cable modem in my living room.  It provides wireless access to my whole household. 
 
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
 
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
 
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.

View 2 Replies View Related

Linksys Wireless Router :: E1000 Cannot Connect To Personal Website

Oct 27, 2011

I own an E1000.  It is hooked up to a Motorola cable modem via Comcast.  I have a personal website sohebvahora.com (still under construction) where I use cpanel to administer it.  I somehow lost all connectivity to my website midday and have not been able to connect back to it in a few days.  Every other site I have gone to works except mine.  It doesn't make sense.Also, I tried connecting my laptop directly to the Motorola modem and my personal site loads, so it has to be the router.  I have tried different devices connected to the router as well, like my ipad, iphone, and other laptops, but the website doesnt load on them either

View 7 Replies View Related

Linksys Wireless Router :: E1000 Cisco Connect Not On Computer

Apr 16, 2013

E1000.  Setup Acer laptop with router and it is working fine.  However I do not have Cisco Connect on the computer.  I would like to use it to connect other devices etc. 

View 1 Replies View Related

Linksys Wireless Router :: E1000 Any Way To Get Cisco Connect By Download

Mar 25, 2012

I have a Cisco E1000 wireless N router.  It is working fine.  I have just completed wiping my HD and reinstalling WinXP and other software.  But I also need Cisco Connect.  It appears the only way to get it installed is to run the Cisco Setup program.  But since the router is working fine, I don't want to mess with the setup.  Is there any way to get Cisco Connect by download? Or get it off my install CD without running the setup program?

View 2 Replies View Related

Linksys Wireless Router :: Cisco E1000 Won't Connect To Internet?

Sep 3, 2011

I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?

View 1 Replies View Related

Linksys Wireless Router :: Connect E1000 To Canon Mg53?

Jun 24, 2012

The printer seems to recognize the wifi but won't connect, even tho I am following instructions to hold down the WPS key before clicking "OK" on the printer.

View 1 Replies View Related

Linksys Wireless Router :: Cisco Connect E1000 Can't Work With Different Wifi

Feb 12, 2012

1. I set a router admin password different from WiFi password(passphrase).

2. I run my Cisco Connect app and it asks me to change my router admin password.
If I don't change it - I can not use Cisco Connect app.
If I provide my WiFi password then it changes my router admin password.
 
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.

View 5 Replies View Related

Linksys Wireless Router :: E1000 Network Is Detected But Cannot Connect To Internet

May 11, 2012

i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.

View 2 Replies View Related

Linksys Wireless Router :: E1000 Can Only Connect To Internet Wirelessly On Guest Connection

Oct 1, 2010

I just bought a E1000 and connected it to my cable modem.  I can connect to the internet with my wired PC and wired Xbox 360 with no problems.  For some reason on my wireless laptop I can only connect to the internet by the Guest connection.  When I connect to the regular router SSID I get local only access, no internet. 

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Cisco Connect Software Won't Load On Computer

Jul 30, 2011

We originally set up Cisco Connect with our E1000 Lynksys Router on a laptop- that has since died.  So- I wanted to set up the software on our desktop and so I put in the set-up disk.  I keep getting message "We didn't find your router" even though I now have the computer linked directly by ethernet cable.  I do have connectivity to internet which I set up using my "Easy set-up key" and have a strong signal.  Can't get past the first router step on the set-up disk to install the program- so now do not have Cisco Connect on any computer.

View 1 Replies View Related

Linksys Wireless Router :: E1000 Blocks Website - Unable To Connect To CPanel

Sep 2, 2011

I have a blog and website hosted by X9 Hosting. I am unable to connect to cPanel, the website, the blog, or and X9 sites.This began when saving a WordPress article in the blog. The save hung and then all connectivity through the router was lost.When using the modem (wired) I can visit the above sites. what do I need to do to gain wireless connectivity back?

View 7 Replies View Related

Dell :: Unable To Connect Modem Router To Desktop Dimension C521

Nov 18, 2011

I have a Netgear DGN3500 wireless modem router that I'm trying to setup on my Dell desktop "Dimension C521".  I get the error message "Ethernet adaptor required".  I'm not sure why I am encountering the error message, as I have successfully installed a modem previously on the desktop via a ethernet cable.

View 1 Replies View Related

Linksys Wireless Router :: WRYT54GS - Desktop Does Not Connect With Internet?

Mar 17, 2012

I have a WRYT54GS router. I just got a new high speed internet satalite install. The router works well with two laptops wirelessly. The desk top uses a wireless USB connection, Linksys 2500. The problem is that before the satalite install, the desk top worked well with the card to connect. Now, the card connects with thw router but does not connect with the internet. I have reinstalled the 2500 software and looked at all that I could but it still does not connect with the internet but does with the router. Any one out there have a thought on this

View 2 Replies View Related

Linksys E1000 Router Cannot Connect To Internet

Jun 10, 2011

My modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.

View 3 Replies View Related

Linksys Wireless Router :: Wrt120n Can Only Connect Desktop To Wifi No Other Devices

Dec 26, 2012

I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works.  Cannot get other devices to use the wifi (iphone, ipod, android phone...).  I am at a loss.  Saw some suggestions about disabling a Upn or something under the router's LAN properties

View 1 Replies View Related

Linksys Wireless Adapters :: Use WGA54G To Connect Standalone Desktop To Access Router?

Jan 4, 2010

Can I connect a WGA54G (v2.1) to a standalone desktop PC running XP Pro SP3 in order to access a wireless router.  I'm trying to eleminate wires and I have a spare WGA54G so I hated to buy a wireless card for the PC if I don't need to

View 3 Replies View Related

Linksys Wireless Router :: E2000 Can't Install Cisco Connect Desktop Software For Mac

Dec 1, 2010

I simply, can't install Cisco Connect.  I want to because it has the parental controls and guest SSID controls.  When I try to install, the progress bar get's to 25% and then stops - the next screen says "Our Customer Support team can help. Your router was not successfully setup." I reset the modem and have my computer plugged in to port 1 while I try to install the software.  I have been able to setup the router manually.  It works great.  My issue is that I can't install Cisco Connect desktop software for Mac.

View 9 Replies View Related

Linksys Wireless Router :: DNS Error When Trying To Connect Xbox360 To WRT54G?

Dec 26, 2006

I recently purchased a new router (WRT54G Ver.6) and the initial setup went well. however, when I try to connect my xbox 360 to this network, the DNS does not resolve and it fails every time. what should I do?

View 2 Replies View Related

Linksys Wireless Router :: Connect Error 80004005 With E3200

Jun 17, 2011

I had Cisco Connect and USB printing off of the E3200 working, but now I'm getting an error and cannot print to HP Laserjet P1006 on my E3200's USB port. Cisco Connect has an error: Error code: 80004005 Model name: Linksys E3200 Model number: E3200 Serial number: Firmware version: 1.0.01 build 3 Operating system: Windows 7 Software version: 1.4.11145.0 Connection type (WAN): DHCP IP address (LAN): 192.168.0.253 IP address (WAN): 192.168.2.100 Computer IP address: 192.168.0.149

View 9 Replies View Related

Protocols / Routing :: Linksys E1000 Router Failed To Connect To Internet

Dec 14, 2011

I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.

View 6 Replies View Related

Linksys E1000 Cannot Connect To Wireless Network

Mar 11, 2011

I have a linksys E1000 and cannot connect to my wireless network. what is supposed to plug in where in the back of the router?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved