How to open port 443 on my wireless router model WRT54G3G-AT? For a secure business connection. Plese don't give me a link to follow, I've tried that one.
View 1 RepliesI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedI would like to connect my old WRT54G3G router to my new WRT54GL (connect to dsl modem) and have wireless on both activated.I have set both on different channels with same SSID and same passwords on WPA2 Personal AES.I have also made the network IP different WRT54G3G 192.168.0.99 and WRT54GL 192.168.0.98.I have also deactivated network DHCP on 192.168.0.99. and Operating mode to router and still not working.
View 1 Replies View RelatedI have this router; WRT54G3G. I wasn't experiencing any problems with it however over the last 3 weeks I have been having difficulty accessing my own website when the router is being used. the link is: [URL].. This is really strange I can't get my head around it, when I do a straight connection from the modem to PC the web page works so it isn't my ISP blocking the website. It just doesn't work when being accessed through the router. When I go through a proxy site such as [URL] it works, the webpage loads! In Google Chrome the error message I get is:
Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.
This issue just started happening. I have a Sierra Wireless Aircard 595 plugged into a WRT54G3G-ST. I will be browsing the internet and all of a sudden, I get the message that Internet Explorer cannot find the web page. At that point, I cannot get to any website. I have several PC's, both wired and wireless connected and they all have the same problem,. I have tried Google Chrome, Firefox and IE9 and all browsers have the same issue. My email continues to download through Outlook, I can use WS FTP and I can also log in to a remote computer using Logmein. It is just browser access that is affected.
There is no set time table to the error. Sometimes it happens within minutes, sometimes it is 30 minutes and sometimes it is over an hour. The only way out of it is to either unplug the router, let it set 30 seconds, then plug it back in or I found that I can go into the setup and do a disconnect from mobile broadband and reconnect and it starts working again. Of course, Sprint says they do not deal with issues unless the card is plugged directly into my PC, which is not the environment that I am running in (even though I bought the router and card from them.) Does Linksys still make a mobile broadband router?
A external scan has reviled that I have an open port. For security reasons I want to close it. I do know the port number.
View 7 Replies View RelatedI want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 1 Replies View RelatedI'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedHave a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.
- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled UPnP
- tried cisco & buffalo tech support
I purchased a Cisco 1750 router. I was able to access my cameras from my iPhone before I setup this router. Now I can get my cameras to work. I need to setup port 80. I followed the instructions on how to do it but for some reason the cameras do not work on my iPhone.
View 1 Replies View RelatedI own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedI am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.
View 5 Replies View Relatedi cant open my ports because i have a internet connection that first goes to my router and then to my modem.
View 3 Replies View RelatedMy firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
[URL]
Im using a Linksys E4500 wireless router behind a Motorola SB6121 modem. My OS is Windows 7 and it is fully up to date. In general my entire network is working well. Now I have purchased a new IP surveillance camera and need to forward a port to be able to have remote viewing of the camera. Mi ISP blocks quite a few inbound ports including 80 so I have been trying a lot of ports all over the map to find something that will allow inbound access.
After several hours, nothing I have tried works, using a couple of different port probes including one called CanYouSeeMe I always get a "timed out" message. I have disabled the firewall in the router and on the local computer and still no luck. This says to me that either Cox is blocking nearly all ports (doubtful) or the modem is blocking access to the router somehow.
The Surfboard modem doesn't have a built in router. Unfortunately I don't have an old working modem to put in the circuit.
I don't guess it matters but the camera is accessible from all other local computers on the LAN using its IP address with a port number appended (right now it's using 8000).
how do i open port 22 in my router
View 1 Replies View Relatedi have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies View Relatedrecently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies View RelatedI have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies View RelatedI want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.
View 3 Replies View Relatedhow to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..
View 2 Replies View Relatedi want to open portforward to utorrent in arouter but i cant open the addres of the router lookand when i go to local area connection status /status/detailsi found number of ip but there is no gateway i take whole ip and put them in browser and its dont open but the last friday i wake up in 3am run cmd and put ipconfigi found the gateway 192.168.2.45put it it in browser its open want username and pass i know them but i see lets doit next day going to bed next day the gate way reverse to the stupid gateway in in the pic i cant use aprogram to open port as i cant knowing my router mode
View 1 Replies View RelatedI have D-Link's DSL-2730U modem/router. I've enabled the router's firewall and disabled TR-069 (putting in some dummy ACS URL and login credentials as well). However port scans show 30005 as open. I believe this is used by the TR-069 client. How do I definitively filter this port?
View 9 Replies View RelatedI need to open port 4001 on my router for someone to have access. I need to do this thru GUI. Cisco ASA 5505
View 5 Replies View RelatedI have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies View RelatedI have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedI have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies View RelatedGet my NAT set to open for MW2 for abit now but cant seem to figure out what the problem is. opening the NAT for this router for Modern Warfare 2 on the PC, not Xbox or PS3
View 7 Replies View RelatedI have a PS3, and i play allot of video games such as all COD game especially MW2. It says i have a strict or moderate NAT. My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless
View 9 Replies View Relatedive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies View RelatedTwo days ago I was able to type this in my browzer (Safari, Macintosh) and open the page. Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding. How can I get onto this page. I need to change the settings on my WRT54G V8.
View 9 Replies View RelatedI've been searching off and on for the past couple months trying to figure out what we could do to our router to open our NAT, after having both the PS3 and Xbox 360 tell me I've got moderate NAT. I tried a DMZ with my PS3 having a static IP, I tried UPnP. I messed with firewall settings, to no avail.
I recently found something that did work however, on Google. Basically what happened was, I needed to reset the router and change a few settings on top of enabling UPnP I didn't know about(CTS Protection, remote management) how they could have anything to do with translation of data.
But like I said, after doing a huge step by step walk through, I was able to get open NAT in the network tests of both PS3 and 360(even though the PS3 obviously still says Type 2. It used to say Type 2, but it also used to have an error code at the bottom of the page). I've checked in games on each console, and they tell me I've got open NAT.
Now I still have one tiny problem. Red Dead Redemption. I play Red Dead Redemption online with two friends(who, incidentally, have the same router as me), and we haven't been able to communicate if we were using routers. We still can't, but I'm thinking that it's not my router anymore. I'm thinking his router has incorrect settings. Am I correct?