Open A Port Without Router Access?

Mar 10, 2012

recently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None

View 2 Replies


ADVERTISEMENT

Cisco WAN :: 5505 - Open Port 4001 On Router For User Access

Apr 21, 2013

I need to open port 4001 on my router for someone to have access. I need to do this thru GUI.  Cisco ASA 5505

View 5 Replies View Related

Open Port 22 To My Router?

Sep 5, 2011

how do i open port 22 in my router

View 1 Replies View Related

How To Open Port On Router

Feb 15, 2012

i have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?

View 1 Replies View Related

Can't Get Router To Open Port 25565?

Jul 26, 2011

I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.

View 15 Replies View Related

Configuration Modem / Router And Open Port

Aug 26, 2012

I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?

View 1 Replies View Related

Cannot Open Router Configuration For Port Forwarding

Jan 6, 2013

I want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.

View 3 Replies View Related

Open UDP Port 16000 In Router Zyxel MAX 206 M1R?

Nov 3, 2011

how to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..

View 2 Replies View Related

Linksys Wireless Router :: Open Port On E4200?

Sep 8, 2012

A external scan has reviled that I have an open port. For security reasons I want to close it. I do know the port number.

View 7 Replies View Related

Protocols / Routing :: Want To Open Port Forward To Utorrent In A Router?

Sep 19, 2011

i want to open portforward to utorrent in arouter but i cant open the addres of the router lookand when i go to local area connection status /status/detailsi found number of ip but there is no gateway i take whole ip and put them in browser and its dont open but the last friday i wake up in 3am run cmd and put ipconfigi found the gateway 192.168.2.45put it it in browser its open want username and pass i know them but i see lets doit next day going to bed next day the gate way reverse to the stupid gateway in in the pic i cant use aprogram to open port as i cant knowing my router mode

View 1 Replies View Related

Security / Firewalls :: Port 30005 Open In Firewalled Router?

Jan 16, 2012

I have D-Link's DSL-2730U modem/router. I've enabled the router's firewall and disabled TR-069 (putting in some dummy ACS URL and login credentials as well). However port scans show 30005 as open. I believe this is used by the TR-069 client. How do I definitively filter this port?

View 9 Replies View Related

Linksys Wireless Router :: How To Open A Port For CCTV On DDR2201v1

Oct 16, 2011

I want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G3G-AT - Way To Open Port 443 For Connection?

Aug 16, 2012

How to open port 443 on my wireless router model WRT54G3G-AT? For a secure business connection. Plese don't give me a link to follow, I've tried that one.

View 1 Replies View Related

Linksys Wireless Router :: E4200 / Open Nat / Port Forward Xbox?

Aug 13, 2012

I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Unable To Open Port 9000

Mar 12, 2012

Have a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port  and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.

- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled  UPnP
- tried cisco & buffalo tech support

View 5 Replies View Related

Linksys Wireless Router :: Cisco 1750 - How To Open Port 80 For IPhone

Dec 17, 2012

I purchased a Cisco 1750 router. I was able to access my cameras from my iPhone before I setup this router. Now I can get my cameras to work. I need to setup port 80. I followed the instructions on how to do it but for some reason the cameras do not work on my iPhone.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Open Port 8080 To All Machines On Network?

Aug 17, 2011

I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?

View 1 Replies View Related

Cisco Firewall :: 3845 - Open Port Range On Secondary IPs On Router Interface

Feb 12, 2013

I have 4 public IPs on Router 3845 interface FastEthernet 0/0/1. IP as below.
 
50.200.2.2
50.200.2.3 secondary
50.200.2.4 secondary
50.200.2.5 secondary
 
I wan to allow ports 80 to 90 on 50.200.2.3 for my webserver (192.168.10.50)

View 5 Replies View Related

Linksys Wireless Router :: E1000 / Port Forwarding Does Not Work Because Only One Or Other Xboxes Will Get Open NAT

Nov 14, 2011

I am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.

View 5 Replies View Related

Cannot Port Forward Or Open Port For Utorrent

Sep 18, 2012

I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox

May 23, 2012

I have the port numbers but do not know how to proceed from there.   Router is a WRT160N V2.

View 9 Replies View Related

What Is Open Port 49153

May 12, 2012

What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.

View 1 Replies View Related

Can't Open Port 88 Being Used By Another Program

May 29, 2012

My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.

View 5 Replies View Related

Can't Seem To Open Port For Camera

Dec 10, 2012

I have an IP camera (foscam). It's connected to my wireless router. My router is connected to my motorola cable modem. My isp is Cox.I want to be able to view this camera from outside (ie: when I'm at work) by going to http://(my real ip) : (port). Port that I use is 88. I can't seem to do this.

First I set the port 88 to the camera's config. I can see the camera when I'm at home (going to 192.168.1.106:88). Reading the manual, I need to forward the port 88. So I go to my linksys wireless router 192.168.1.1 and single-port forward 88 UDP TCP (both) to 192.168.1.106.This doesn't solve the problem.I go to Open Port Check Tool and put in port 88 and it says I could not see your service on (my real ip) on port (88)

View 9 Replies View Related

How To Open A Port In Windows Xp

Jun 14, 2011

I have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port

View 1 Replies View Related

Servers :: Have Ip And Open Port But Can't Connect

Feb 21, 2011

i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it

View 2 Replies View Related

Port 80 Intermittent Open And Close

May 3, 2011

I've been trying to set up a customers security camera's for remote viewing. He has a HP running Vista, a netgear grt614 vs10 router, and a static IP address through Verizon. My problem is this. I set up port forwarding for port 80. All seems to work well sometimes and I can connect to his DVR no problem. Then other times I can't connect at all. I'll run a port checker and it will tell me port 80 is closed. Is it possible that Verizon will off and on block inbound port 80? I seem to only be able to connect during buisness hours. Is it possible that his PC needs to be on for the port to be open. The DVR is the server which is always on and the router is always on. I don't know why the computer would have to be on.

View 6 Replies View Related

Unable To Set Up The Server And Open Up The Port?

Dec 18, 2012

I've been trying to open ports to start a server on some games that I play.I used a guide that shows you how to set up the server and open up the port, but I can't get it to work.I've tried making an exception in my firewall,but that didn't work, so I tried completely disabling my firewalls. Nothing. I've gone into my router settings and opening a port this way: But it still doesn't open it up. This is what I'm using to check it.In fact, NONE of the ports are open it seems? No matter what port I try to type in on the port checker, it always gives me that same error.

-Both?
-Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:Usersack>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : FellowShip[code]....

Who is your Internet Service Provider (ISP)?

-Comcast

What type of Broadband connection are you using?

-Cable

What is the exact Make and Model of your Modem, Router or Modem/Router Combo?

-Router is WNR2000v3, Modem is SMCD3GNV (One I'm renting from Comcast)

What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer?

-Avast! Antivirus and Default Windows Firewall

View 12 Replies View Related

How To Find Common / Open UDP Port Of ISP

Jul 12, 2012

how to find open udp ports of isp i want it for internet purpose

View 3 Replies View Related

Ultimate UDP / TCP Open Port Scanner?

Jun 7, 2012

tell me the most advanced the udp and tcp open port scanner of my network ?

View 2 Replies View Related

How To Test Whether Port Is Open On Firewall

Nov 23, 2011

I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.

View 2 Replies View Related

Is RTP Port Open Indicates That Rtp Is Flowing In The Network

Jan 29, 2011

Is RTP port open indicates that rtp is flowing in the network.

View 2 Replies View Related

How To Open Port - Forgot My Password?

Oct 14, 2011

How to Open Port and I forgot my password.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved