Is RTP Port Open Indicates That Rtp Is Flowing In The Network
Jan 29, 2011Is RTP port open indicates that rtp is flowing in the network.
View 2 Replies
ADVERTISEMENT
Home Network :: Port Refuse To Open?
May 3, 2012I have tried to open port 25565. Everything in my router is set as it should be,according to the guides I've followed.
View 3 Replies View RelatedHome Network :: Port 8016 Will Not Open
Jul 27, 2011so i have a server running on the network on 192.168.0.2 gatewway of 192.168.0.1. I am trying to setup a DVR for remote access and all this was working previously. I have setup the server for a VPN server and remote access, DHCP and ROUTER services are not enabled on the server, neither is NAT. This was working previously, now when i try forward port 8016, and connect, it will not open.
View 5 Replies View RelatedHome Network :: Open Port On A TP-Link WR491ND
Jul 23, 2011I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
Home Network :: No Open Ports Despite Port Forwarding
Jul 10, 2012I'm struggling to set up an SSH router and it always looks like the port is closed...
Here's my set-up
www>D-Link router (ADSL connection)>Linksys router (+Tomato)>Target PC
I have set up the Linksys router to be an SSH server running Tomato as described in many other forums. The "Tomato router" sits behind my ISP-provided D-link-2680 router.
The internal IP of the Tomato router is 192.168.1.200 and if I try: Code:
Linksys Wireless Router :: E4200 - Open Port 8080 To All Machines On Network?
Aug 17, 2011I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedCannot Port Forward Or Open Port For Utorrent
Sep 18, 2012I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedWhat Is Open Port 49153
May 12, 2012What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.
View 1 Replies View RelatedOpen Port 22 To My Router?
Sep 5, 2011how do i open port 22 in my router
View 1 Replies View RelatedCan't Open Port 88 Being Used By Another Program
May 29, 2012My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies View RelatedCan't Seem To Open Port For Camera
Dec 10, 2012I have an IP camera (foscam). It's connected to my wireless router. My router is connected to my motorola cable modem. My isp is Cox.I want to be able to view this camera from outside (ie: when I'm at work) by going to http://(my real ip) : (port). Port that I use is 88. I can't seem to do this.
First I set the port 88 to the camera's config. I can see the camera when I'm at home (going to 192.168.1.106:88). Reading the manual, I need to forward the port 88. So I go to my linksys wireless router 192.168.1.1 and single-port forward 88 UDP TCP (both) to 192.168.1.106.This doesn't solve the problem.I go to Open Port Check Tool and put in port 88 and it says I could not see your service on (my real ip) on port (88)
How To Open A Port In Windows Xp
Jun 14, 2011I have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port
View 1 Replies View RelatedHow To Open Port On Router
Feb 15, 2012i have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies View RelatedCisco VPN :: 1841 - L2L Is Up But No Traffic Flowing
Jun 7, 2011 im attempting to setup a L2L VPN between an 1841 and an NSA 2400, via the SDM.The Tunnel comes up, and when I test connectivity it shows as being successful, but I do get an error stating:-
"A ping with data size of this VPN interface MTU size and 'Do not Fragment' bit set to the other end VPN device is failing. This may happen if there is a lesser MTU network which drops the 'Do not fragment' packets."
From my reading this shouldnt cause all traffic to drop though, right?
Currently I cannot ping or telnet to services from one end of the tunnel to the other. I was able to ping momentarily from the Sonicwall end at one point, but this disappeared shortly afterwards (without my changing anything regarding the config).
All of the ACLs created were populated through the SDM.
Servers :: Have Ip And Open Port But Can't Connect
Feb 21, 2011i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it
View 2 Replies View RelatedOpen A Port Without Router Access?
Mar 10, 2012recently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
Can't Get Router To Open Port 25565?
Jul 26, 2011I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies View RelatedPort 80 Intermittent Open And Close
May 3, 2011I've been trying to set up a customers security camera's for remote viewing. He has a HP running Vista, a netgear grt614 vs10 router, and a static IP address through Verizon. My problem is this. I set up port forwarding for port 80. All seems to work well sometimes and I can connect to his DVR no problem. Then other times I can't connect at all. I'll run a port checker and it will tell me port 80 is closed. Is it possible that Verizon will off and on block inbound port 80? I seem to only be able to connect during buisness hours. Is it possible that his PC needs to be on for the port to be open. The DVR is the server which is always on and the router is always on. I don't know why the computer would have to be on.
View 6 Replies View RelatedUnable To Set Up The Server And Open Up The Port?
Dec 18, 2012I've been trying to open ports to start a server on some games that I play.I used a guide that shows you how to set up the server and open up the port, but I can't get it to work.I've tried making an exception in my firewall,but that didn't work, so I tried completely disabling my firewalls. Nothing. I've gone into my router settings and opening a port this way: But it still doesn't open it up. This is what I'm using to check it.In fact, NONE of the ports are open it seems? No matter what port I try to type in on the port checker, it always gives me that same error.
-Both?
-Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersack>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : FellowShip[code]....
Who is your Internet Service Provider (ISP)?
-Comcast
What type of Broadband connection are you using?
-Cable
What is the exact Make and Model of your Modem, Router or Modem/Router Combo?
-Router is WNR2000v3, Modem is SMCD3GNV (One I'm renting from Comcast)
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer?
-Avast! Antivirus and Default Windows Firewall
How To Find Common / Open UDP Port Of ISP
Jul 12, 2012how to find open udp ports of isp i want it for internet purpose
View 3 Replies View RelatedUltimate UDP / TCP Open Port Scanner?
Jun 7, 2012tell me the most advanced the udp and tcp open port scanner of my network ?
View 2 Replies View RelatedHow To Test Whether Port Is Open On Firewall
Nov 23, 2011I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.
View 2 Replies View RelatedHow To Open Port - Forgot My Password?
Oct 14, 2011How to Open Port and I forgot my password.
View 2 Replies View RelatedD-Link DIR-655 :: Unable To Open Port 21?
Jan 4, 2011I have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies View RelatedNetworking :: To Open Port In ISA 2006
Oct 2, 2011How to open a port in ISA 2006, step by step?So for example, if you wanted to open port 22559 incoming from either anyone or a static IP, NAT'd to an internal IP, what would be the steps?The setup is SBS 2003 Premium edition, two NIC's, DSL on the external NIC with a static IP.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 With 8.4.1 - Traffic Is Not Flowing
Mar 27, 2011I'm currently using ASA 5510 with software 8.4.1 and I have an issue with nat configuration. I used the following config line:nat (inside, dmz) source dynamic LAN Pat1 destination Server1 Server1
The traffic is not flowing and when I use Packet Tracer, packets are dropped at the NAT rule with the following error: Drop-reason: (acl-drop) Flow is denied by configured rule.The only ACE I have is permit ip any any.
Cisco Firewall :: ASA 5510 No Traffic Flowing?
Jul 12, 2011I have manually configured the Firewall ASA 5510 from existing PIX to match the configuration, however when I connect the firewall to the Network, no traffic is flowing in either direction. I have the Inside network on the 172.29.0.0 subnet and the outside network on 20.2.0.0 subnet. I am attaching the cofiguration file.
View 4 Replies View RelatedCisco WAN :: 3900 Router - Traffic Not Flowing
Jun 13, 2013i have a gateway router going to the internet....using public IP addresses on both interfaces. starting on Monday, traffic would suddenly stop flowing from the inside of the network going out, though i can still ping the outside interface , but when I log in to the router I am able to ping to the internet. so its like traffic is not passing from the outside int to the inside int. I have a 3900 router. other thing is, when i restart the router it will work for some time and then just stop again....
View 6 Replies View RelatedServers :: How To Open UDP Port 16000 In Windows 7
May 21, 2011I've got a Belkin wireless router and Windows 7. It's so I can use the application Gameranger as it requires UDP Port 16000 open. I don't have a static IP if incase I needed one tell me how to do that to.Here's the Gameranger link here:
View 2 Replies View RelatedConfiguration Modem / Router And Open Port
Aug 26, 2012I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies View RelatedCannot Open Router Configuration For Port Forwarding
Jan 6, 2013I want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.
View 3 Replies View RelatedHuawei E583C - How To Open Port 2056
Jan 21, 2012I have a Huawei E583C Mobile Modem but cannot forward some ports needed for a game (Civilization 4), specifically port 2056. Im on a windows XP and have disabled that firewall and dont have any other firewall. Ive also logged into the modem with the standard IP but unlike my linkys router in another pc, I can't find the open port section. [code]
View 10 Replies View RelatedOpen UDP Port 16000 In Router Zyxel MAX 206 M1R?
Nov 3, 2011how to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..
View 2 Replies View Related