Can't Seem To Open Port For Camera
Dec 10, 2012
I have an IP camera (foscam). It's connected to my wireless router. My router is connected to my motorola cable modem. My isp is Cox.I want to be able to view this camera from outside (ie: when I'm at work) by going to http://(my real ip) : (port). Port that I use is 88. I can't seem to do this.
First I set the port 88 to the camera's config. I can see the camera when I'm at home (going to 192.168.1.106:88). Reading the manual, I need to forward the port 88. So I go to my linksys wireless router 192.168.1.1 and single-port forward 88 UDP TCP (both) to 192.168.1.106.This doesn't solve the problem.I go to Open Port Check Tool and put in port 88 and it says I could not see your service on (my real ip) on port (88)
View 9 Replies
ADVERTISEMENT
Mar 27, 2013
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
View 5 Replies
View Related
Jan 9, 2013
My modem/router is Riger and model is DB108-WL. I had set Port Forwarding in my modem/router configuration page using web [URL] had disable the uPNP setting in both the modem/router and camera setting page. Besides, also disable the firewall on the modem/router and on my laptop (Windows firewall and McAfee antivirus)My camera static IP address details are listed as below:
IPv4 Address: 192.168.1.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Port number: 8080
I am able to access my IP Camera using local LAN network by using web [URL] but unable to access from external network WAN using internet by using web http://*External IP Address*:8080 My ISP provide a dynamic external IP address so my external IP Address will change each time I connect to internet network. To trace this, I used IPchicken website IP Chicken - Whats my IP address? ip address lookup to identify my modem/router Public IP address. I used my smartphone to access this external IP Address in order to prevent NAT Loopback issue but still can not access.
1) Do I need to have my host computer turn on at home in order for me to access the IP Camera from external WAN network which is internet from anywhere outside? Or just turn on my modem/router and IP Camera will do?
2) I had read a lot of blogs and forums from the past 2 weeks about Port Forwarding. From one of the forum, it mentioned need to setup 2 ports for Port Forwarding in order to get IP Camera access from external network. One for web interface which use port 80 and another one for video streaming which is port 1024. So, is it true for every IP Camera to configure 2 ports forwarding in order to get access from external network?
3) If I can access the IP Camera from local LAN network, does it mean my laptop Windows firewall and McAfee antivirus setting is ok for access from external network?
4)Is it a reliable method to use smartphone as a test to try out whether my setting is ok to access the IP Camera from external network? My smartphone is Android 2.3 OS and able to access the IP Camera when connected to my modem/router using WIFI (local LAN access). When key in external IP address using 3G network, it can not access.
View 19 Replies
View Related
Sep 18, 2012
I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies
View Related
Aug 19, 2012
I am trying to set up a Cisco ASA 5510 running 8.2 to allow a connection to a Polycom camera that sits behind it. What I want to do is forward multiple ports to allow a connection from an outside office. The polycom camera uses the following ports:
1720 tcp
3230-3235 tcp
3230-3253 udp
I got these port numbers from the Polycom web site. So what I did was create a service object as follows:
object-group service All-Polycom-ports
service-object tcp range 3230 3235
service-object tcp eq h323
service-object udp range 3230 3253 My question is how can I use this service object in a static (inside,outside)
command so that I don't have to create multiple commands for the port forwarding. Is this even possible or do I have to sit down and write out around 30 seperate commands to do this. I've been searching the web and it seems a lot of people want to do this but so far I haven't found an answer.
View 3 Replies
View Related
Feb 15, 2012
I am trying to forward a port to see a camera over the internet. On the single port forwarding screen under Gaming, I have put in port 8090 (Ext and Int),Protocal both, an IP address and Enabled. I have also tried putting in a range, but neither seems to work. After forwarding the port, I check with What's My IP Addrewss to get the external IP, then put the IP in a blank browser page with and without the port number. I have tried this several times without any result.
View 9 Replies
View Related
Oct 26, 2011
I've configured my rounter but am having a firewall issue, I think.I'm trying to connect remotely to an IP Camera.I've set the port forwarding on my router for port 8081 to forward to the IP of my camera.I've set the firewall aswell to allow traffic from the WAN to the IP of my camera.
View 1 Replies
View Related
Jan 17, 2013
I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera
View 10 Replies
View Related
Feb 7, 2013
I am wanting to access my IP camera over the Internet. I am not a computer wiz by any stretch and after a couple of failed attempts. My ISP is Comcast and they say that I have dynamic dns and should have no issues viewing my cameras. I know how to get to the port forwarding area of the router but am confused as to which ports to forward. The set up instructions for the camera (Airsight) suck. Screen shots of the set up don't match the actual router
View 7 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
May 12, 2012
What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.
View 1 Replies
View Related
Sep 5, 2011
how do i open port 22 in my router
View 1 Replies
View Related
May 29, 2012
My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies
View Related
Jun 14, 2011
I have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port
View 1 Replies
View Related
Feb 15, 2012
i have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies
View Related
Feb 21, 2011
i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it
View 2 Replies
View Related
Mar 10, 2012
recently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
View 2 Replies
View Related
Jul 26, 2011
I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies
View Related
May 3, 2011
I've been trying to set up a customers security camera's for remote viewing. He has a HP running Vista, a netgear grt614 vs10 router, and a static IP address through Verizon. My problem is this. I set up port forwarding for port 80. All seems to work well sometimes and I can connect to his DVR no problem. Then other times I can't connect at all. I'll run a port checker and it will tell me port 80 is closed. Is it possible that Verizon will off and on block inbound port 80? I seem to only be able to connect during buisness hours. Is it possible that his PC needs to be on for the port to be open. The DVR is the server which is always on and the router is always on. I don't know why the computer would have to be on.
View 6 Replies
View Related
Dec 18, 2012
I've been trying to open ports to start a server on some games that I play.I used a guide that shows you how to set up the server and open up the port, but I can't get it to work.I've tried making an exception in my firewall,but that didn't work, so I tried completely disabling my firewalls. Nothing. I've gone into my router settings and opening a port this way: But it still doesn't open it up. This is what I'm using to check it.In fact, NONE of the ports are open it seems? No matter what port I try to type in on the port checker, it always gives me that same error.
-Both?
-Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersack>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : FellowShip[code]....
Who is your Internet Service Provider (ISP)?
-Comcast
What type of Broadband connection are you using?
-Cable
What is the exact Make and Model of your Modem, Router or Modem/Router Combo?
-Router is WNR2000v3, Modem is SMCD3GNV (One I'm renting from Comcast)
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer?
-Avast! Antivirus and Default Windows Firewall
View 12 Replies
View Related
Jul 12, 2012
how to find open udp ports of isp i want it for internet purpose
View 3 Replies
View Related
Jun 7, 2012
tell me the most advanced the udp and tcp open port scanner of my network ?
View 2 Replies
View Related
Nov 23, 2011
I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.
View 2 Replies
View Related
Jan 29, 2011
Is RTP port open indicates that rtp is flowing in the network.
View 2 Replies
View Related
Oct 14, 2011
How to Open Port and I forgot my password.
View 2 Replies
View Related
Jan 4, 2011
I have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies
View Related
Oct 2, 2011
How to open a port in ISA 2006, step by step?So for example, if you wanted to open port 22559 incoming from either anyone or a static IP, NAT'd to an internal IP, what would be the steps?The setup is SBS 2003 Premium edition, two NIC's, DSL on the external NIC with a static IP.
View 1 Replies
View Related
May 3, 2012
I have tried to open port 25565. Everything in my router is set as it should be,according to the guides I've followed.
View 3 Replies
View Related
May 21, 2011
I've got a Belkin wireless router and Windows 7. It's so I can use the application Gameranger as it requires UDP Port 16000 open. I don't have a static IP if incase I needed one tell me how to do that to.Here's the Gameranger link here:
View 2 Replies
View Related
Aug 26, 2012
I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies
View Related
Jan 6, 2013
I want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.
View 3 Replies
View Related
Jan 21, 2012
I have a Huawei E583C Mobile Modem but cannot forward some ports needed for a game (Civilization 4), specifically port 2056. Im on a windows XP and have disabled that firewall and dont have any other firewall. Ive also logged into the modem with the standard IP but unlike my linkys router in another pc, I can't find the open port section. [code]
View 10 Replies
View Related
Jul 27, 2011
so i have a server running on the network on 192.168.0.2 gatewway of 192.168.0.1. I am trying to setup a DVR for remote access and all this was working previously. I have setup the server for a VPN server and remote access, DHCP and ROUTER services are not enabled on the server, neither is NAT. This was working previously, now when i try forward port 8016, and connect, it will not open.
View 5 Replies
View Related
