Linksys Wireless Router :: EA2700 Port Forwarding To Remote Access IP Camera?
Feb 7, 2013
I am wanting to access my IP camera over the Internet. I am not a computer wiz by any stretch and after a couple of failed attempts. My ISP is Comcast and they say that I have dynamic dns and should have no issues viewing my cameras. I know how to get to the port forwarding area of the router but am confused as to which ports to forward. The set up instructions for the camera (Airsight) suck. Screen shots of the set up don't match the actual router
View 7 Replies
ADVERTISEMENT
Feb 6, 2013
My first issue with this device is when I try to untick NAT to disable it I lose my internet connection. This also disables access to router's address 192.168.1.1 forcing me to reset the device and set it up all over again. Why is this happening? I tried this at least five times with the same result. Second question I have is if the DHCP reservation is the right option if I want to forward ports for certain applications like Vuze? When the DHCP reservation window opens I see all my wireless devices in the list (laptop, phone) but not the main computer which is connected through ethernet port. But that is yet another problem.
I've got a cable modem, connection is set to Automatic DHCP and I all want is to disable all firewalls, NAT and other unnecessary protection that's slowing my internet speed, set up MAC address filtering, port forwarding and close this terrible software so I never have to see it or think about it ever again.
View 2 Replies
View Related
Feb 15, 2012
I am trying to forward a port to see a camera over the internet. On the single port forwarding screen under Gaming, I have put in port 8090 (Ext and Int),Protocal both, an IP address and Enabled. I have also tried putting in a range, but neither seems to work. After forwarding the port, I check with What's My IP Addrewss to get the external IP, then put the IP in a blank browser page with and without the port number. I have tried this several times without any result.
View 9 Replies
View Related
Nov 21, 2012
I want to use Qos in EA2700. I want to know whether the port in the Qos means the port of local computer or the port of server. Or is it a source port or a destination port?
View 3 Replies
View Related
Sep 7, 2012
setting up ea2700 to enable remote DVR viewing?I have tried port forwarding and enabling remote management. But I can only access locally.
View 9 Replies
View Related
Jan 17, 2013
I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera
View 10 Replies
View Related
Sep 18, 2012
I have recently purchased an EA4500 router. I assigned my sons XBOX a static IP via DHCP reservation (outside of the standard DHCP range). I set up single port forwarding on all the standard xbox required ports. Once I click the "enabled" box, I am unable to access the internet from any of the computers connected to the router. If I uncheck the enable box, I am instantly able to access the internet.
View 4 Replies
View Related
Jul 12, 2012
I recently opened the ports used by Xbox Live: Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP)I am able to use xbox live once these ports are opened but once they are enabled, I can not get wireless internet. The xbox is connected to the router with a cable so it isn't experiencing this probem. My laptop and phone are able to identify the network and join but there is no internet access.
If I disable these ports, everything goes back to normal.
View 1 Replies
View Related
Jul 30, 2012
This is my second post today trying to fix the NAT types for my 2 xbox 360. I tried the port forwarding method but with this router when I enable the ports I lost internet access in my wired devices but my wireless devices still have internet access. I even lost internet access on my computer. I never had manu problems with a router trying to get my NAT type open on my 2 xbox.
View 6 Replies
View Related
Jan 9, 2013
My modem/router is Riger and model is DB108-WL. I had set Port Forwarding in my modem/router configuration page using web [URL] had disable the uPNP setting in both the modem/router and camera setting page. Besides, also disable the firewall on the modem/router and on my laptop (Windows firewall and McAfee antivirus)My camera static IP address details are listed as below:
IPv4 Address: 192.168.1.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Port number: 8080
I am able to access my IP Camera using local LAN network by using web [URL] but unable to access from external network WAN using internet by using web http://*External IP Address*:8080 My ISP provide a dynamic external IP address so my external IP Address will change each time I connect to internet network. To trace this, I used IPchicken website IP Chicken - Whats my IP address? ip address lookup to identify my modem/router Public IP address. I used my smartphone to access this external IP Address in order to prevent NAT Loopback issue but still can not access.
1) Do I need to have my host computer turn on at home in order for me to access the IP Camera from external WAN network which is internet from anywhere outside? Or just turn on my modem/router and IP Camera will do?
2) I had read a lot of blogs and forums from the past 2 weeks about Port Forwarding. From one of the forum, it mentioned need to setup 2 ports for Port Forwarding in order to get IP Camera access from external network. One for web interface which use port 80 and another one for video streaming which is port 1024. So, is it true for every IP Camera to configure 2 ports forwarding in order to get access from external network?
3) If I can access the IP Camera from local LAN network, does it mean my laptop Windows firewall and McAfee antivirus setting is ok for access from external network?
4)Is it a reliable method to use smartphone as a test to try out whether my setting is ok to access the IP Camera from external network? My smartphone is Android 2.3 OS and able to access the IP Camera when connected to my modem/router using WIFI (local LAN access). When key in external IP address using 3G network, it can not access.
View 19 Replies
View Related
Apr 24, 2012
I recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine
View 9 Replies
View Related
Oct 26, 2011
I've configured my rounter but am having a firewall issue, I think.I'm trying to connect remotely to an IP Camera.I've set the port forwarding on my router for port 8081 to forward to the IP of my camera.I've set the firewall aswell to allow traffic from the WAN to the IP of my camera.
View 1 Replies
View Related
Feb 2, 2013
Every time after the router (Linksys EA2700) is powered off and restarted, there is no interent access available. The router configuration status reports an Internet Address of 0.0.0.0 and all the devices at home are left with a wifi without Internet access. I have to unplug the WAN from the router and plug it in again while it is turned on to restore internet access (and a normal Internet Address is seen from the status page). The WAN works fine with the routers I had previously. I wonder if I have to perform this every time I power on the router. I have tried resetting the router and reinstalling Cisco Connect but that didn't work.
View 3 Replies
View Related
May 7, 2013
I have a Cisco outer EA2700 connected using a Lan cable, Lan cable works fine as I connected it directly to my PC, I am unable to access wifi network connection, I am able to search the router and also able to cnnect to the router, But wireless connection shows limited or no connectivity, and unable to access any websites. It was working fine till yesterday, I tried rebootng ad also unplug and replug the network cable also reset the router but does not work
View 1 Replies
View Related
May 3, 2013
I have a domain name which I register to my WAN address so I can do service hosting from my home network. I recently switched out my WRT54G running DDWRT with an EA2700. I set up my port forwards and static dhcp assignments and they are working from outside my network, but when I try any network operation involving my WAN address from my LAN machines, the connections just timeout.
I read in some posts that "you cannot do this" and "you have to test from a remote internet machine". Well, this WORKED with DDWRT, so it's not like it's impossible to make a router that does this. Why can't I do this with the EA2700? Is there some magic setting that will let this work??
The whole point of using a domain name is that I can access my services ANYWHERE using the convenient "name" thing.. genius, right? Except when I bring my laptop home and suddenly my domain goes non-responsive.
View 4 Replies
View Related
Jan 17, 2013
I have an EA 2700 installed using a wired network. It is just one desktop computer and a VOIP box shared by my internet connection. I am quite new at wireless connectivity.I would like to add wireless devices, specifically a phone and a laptop, but I do not want ANY of the wireless devices to be able to access and make changes to the ROUTER or any other computers on the network. I do need to keep the network secure.How do I set the router and/or devices up to accomplish this?
View 9 Replies
View Related
Jun 29, 2012
I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]
View 2 Replies
View Related
Dec 8, 2012
I've had this router for about 3 weeks. It's only 20 feet from the computer, but my computer on 2 or 3 separate days had trouble staying connected. The signal dropped to 5 Mbps and had a little yellow symbol that said no internet access and when I looked at the properties it said, "limited or no connectivity." I got impatient and purchased a 75 ft Ethernet cable online with plans to possibly return the router as I don't really need wireless anyways and since I spent $100 on this router I expect it to work at 20 ft distance.
For the last few days it has remained at 54 Mbps or more sometimes all the way up to 108 mbps. But now since it got pretty low a few times I don't trust it enough so I might return it anyways.IPv6 connectivity says no network access. This might be because when it asked for administrator password to recognize it as a trusted home network I closed it instead of putting in the password.
View 5 Replies
View Related
Oct 23, 2012
I purchased Linksys (Cisco) EA2700. For the moment it is being used as an access point for a wireless network (WLAN) and an Ethernet switch. 4 laptops are being connected to it through the wireless network, the wire connects one computer and a separate ADSL modem (it is used for accessing Internet). As a result minimal ping to any of the devices in wireless network is 8 ms – the best result and sometimes rises to 20 ms. Consequently when working with local network resources one suffers from speed decrease. Ping to the access point through the wire varies from 1 to 8 ms. These delays are quite strange as even on cheaper routers ping does not rise above 2 ms (usually <1ms). Is it normal for the device?
View 9 Replies
View Related
Sep 7, 2012
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies
View Related
Aug 30, 2011
Recently upgraded to WRT400N from older 54G. Opened ports to my Linksys IP Cameras and can access via DynDNS address (using Modem addressort) from inside my network but not remotely. If I disable SPI Firewall it works from outside my network ... am I missing a step ... never had this problem with 54G and although I run software firewall on my computers I like the thought of added security of a firewall on my router.
View 2 Replies
View Related
Mar 3, 2013
I have a business class SMC D3G-BIZ cable modem. Directly connected to it I have surveillance camera. I need getting the correct IP settings so I can access it remotely. I previously was able to do this but the cable modem was recently replaced.The camera software needs a IP Address, subnet mask, and default gateay nformation. I do not currently have a static IP Address.In the camera IP address should I put in the public IP Address of the cable modem or should I create a static IP Address that is on the LAN. such as 10.*.*.*?How can I determine the subnet mask? Do I go to Gateway > Network within the cablem modem menu?The default gateway should be same as the default gateway for the LAN settings in Gateway > Network, right?
View 3 Replies
View Related
Jun 26, 2012
I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
View 9 Replies
View Related
Feb 26, 2013
I use modem and router to connect to the internet.When I connect my PC directly to modem port forwarding is working.When I connect my PC through my router the port is closed. I followed instruction for port forwarding.
View 9 Replies
View Related
Sep 16, 2011
I'm trying to port forward with the Linksys BEFW11S4, I've followed all the instruction from support website. I went to the Application & Gaming then Port Range Forwarding. I changed the settings so I can access this IP remotely. When I try to log into this IP from a different network it wont let me.
View 5 Replies
View Related
Nov 2, 2012
I am trying to port forward my Linksys e4200 router v 1.0.04. However, it is not successful for when ever I check if the ports are open they fail they test.
I am sure that I am doing the actual port forwarding correctly (I hope), but something is refraining the ports from being open.
View 9 Replies
View Related
Nov 2, 2012
I am trying to install and use EchoLink on my pc's and they require port forwarding for 5198-5200 but I'm having trouble with theTo IP Address" as I don't know what # to use. It says I can't use 192.168.1.1 since it's the same as the LAN IP address so what do I use? I am trying to follow the instructions on [URL] If I leave it just as 192.168.1. it won't accept it and if I use any other number, it accepts it but I still can't get through.
View 3 Replies
View Related
Nov 1, 2009
I just bought a WRT120N wireless router, and have run into some strange problems with port forwarding. I have a two router setup, because my ISP have set it up so i can only use my router from them to get my connection, and then i just have that one connected to my WRT120N. So my setup looks like the following:
The problem is that ONLY the three first ports works. I have forwarded them in the exact same manner, give it a name, put in the same external and internal port, and enable the port forwarding, but according ot can you seeme.org, only 4667, 6112, and 4669 can be seen, the rest is not responding. I even tried to enable port 21, which is a default setting in the router, but it will just not work.I have of course tried to reboot both router and PC, upgraded the routers firmware, but no luck.
View 9 Replies
View Related
Aug 31, 2012
I'm a happy user of the E4200 for a few weeks now, and all in all it's a very robust and useful router.Within my network I have a webserver running using both HTTP (TCP 80) and HTTPS (TCP 443). I want to make this webserver available to the internet and so I configure port forwarding to forward port TCP 80 and TCP 443 to my internal webserver. As soon as I now apply these settings, I loose connection to the webinterface of the E4200 and get connected to my internal webserver. I would expect the router would only forward connections coming in through the external interface of the router, however this is apparently not the case (or at least not in my setup). So I tried setting up remote management on a different port to at least allow me to remotely manage the router, but this does not work from my internal network.
Right now, I'm assuming I'm doing something wrong, or have miss-configured something. Is it possible to switch the webadmin port to a different port (like 8080 and 8443)?
View 1 Replies
View Related
Jan 19, 2012
I've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500. I have tried both the single port forwarding and the multi port range forwarding, and neither works. I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.I'm running the latest firmware provided by Linksys/Cisco.
View 1 Replies
View Related
Jan 28, 2012
I recently got a e2500 router and set up the port forwarding for my ps3. But then i go to check the ports to see if they are open and they all stay closed.I have no clue whats wrong as I have entered the port forwarding info correctly as I got guideline from portforward.com but still no luck
View 2 Replies
View Related
Mar 30, 2013
I'm trying to forward my ports and I've been following a guide from [URL]. It's simple, but it's not working for me. I couldn't find my router on their list, so I'm assuming the worst and that it's not supported for the Port Forwarding. I just went with the normal WRT54G without the version 8 and tried it that way, I didn't get anything out of that either. It keeps telling me that the port isn't open and I can't receive the information packets that they're sending me.
View 3 Replies
View Related
Nov 14, 2012
Im going to change my NAT status to "open" on my xbox 360, but I don't have access to the router I think. Its my grandmas internet and im going to be here for 10 days so it could be nice if you could tell me the username and password so i can open the ports?
Model:Cisco EPC3925Vendor:CiscoHardware Revision:1.0 MAC Address:18:59:33:ad:b0:a0Bootloader Revision:2.3.0_R1Current Software Revision:EPC3925-ESIP-16-v302r125532-110504cFirmware Name:epc3925-ESIP-16-v302r125532-110504c.binFirmware Build Time:May 4 17:40:26 2011Cable Modem Status:OperationalWireless Network:Enable
View 1 Replies
View Related
