Home Network :: Port Refuse To Open?
May 3, 2012I have tried to open port 25565. Everything in my router is set as it should be,according to the guides I've followed.
View 3 Replies
ADVERTISEMENT
Home Network :: Port 8016 Will Not Open
Jul 27, 2011so i have a server running on the network on 192.168.0.2 gatewway of 192.168.0.1. I am trying to setup a DVR for remote access and all this was working previously. I have setup the server for a VPN server and remote access, DHCP and ROUTER services are not enabled on the server, neither is NAT. This was working previously, now when i try forward port 8016, and connect, it will not open.
View 5 Replies View RelatedHome Network :: Open Port On A TP-Link WR491ND
Jul 23, 2011I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
Home Network :: No Open Ports Despite Port Forwarding
Jul 10, 2012I'm struggling to set up an SSH router and it always looks like the port is closed...
Here's my set-up
www>D-Link router (ADSL connection)>Linksys router (+Tomato)>Target PC
I have set up the Linksys router to be an SSH server running Tomato as described in many other forums. The "Tomato router" sits behind my ISP-provided D-link-2680 router.
The internal IP of the Tomato router is 192.168.1.200 and if I try: Code:
Cisco Switching/Routing :: 3750 Switches Refuse To Fire The Port-security Violation Traps
Oct 20, 2010My group has recently started configuring traps on our switches to alert us of issues as they arise vs. waiting for the Helpdesk to receive user complaints and then responding.We have successfully configured the 2950 and 2960 switches to alert us when a port-security violation happens. However, the 3750 switches refuse to fire the port-security violation traps. The 3750's will fire an errdisable trap when the port goes down though.
Here is one of the port configurations:
interface FastEthernet1/0/45
switchport access vlan 5
switchport mode access
switchport port-security
switchport port-security mac-address sticky
[code].....
And here is the output of the port-security debug:
2522070: Oct 21 16:37:04: %LINK-3-UPDOWN: Interface FastEthernet1/0/45, changed state to down
2522089: Oct 21 16:37:05: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa1/0/45, putting Fa1/0/45 in err-disable state
2522100: Oct 21 16:37:05: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0012.3f07.95d3 on port FastEthernet1/0/45.
All of the 3750's are running C3750-IPBASEK9-M, Version 12.2(53) SE2. Wireshark also shows the errdisable traps, but no other traps so I've ruled out the traps being missed. All of the switches have been reloaded and power cycled.
Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?
Feb 24, 2013I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
Home Network :: Setting Up Open VPN On OVH
Aug 14, 2012I want to start using a VPN and would rather have my own server for it so was going to buy a kimsufi 2g with ubuntu installed on it, Have been looking on the openvpn website but cant find any tutorials on how to setup openvpn on ubuntu.
View 1 Replies View RelatedIs RTP Port Open Indicates That Rtp Is Flowing In The Network
Jan 29, 2011Is RTP port open indicates that rtp is flowing in the network.
View 2 Replies View RelatedConnect Wan Port Of Cable Modem To Lan Port Of Home Network?
Feb 26, 2012is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies View RelatedHome Network :: Port Forwarding Not Access Port
Jul 31, 2011I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 - Open Port 8080 To All Machines On Network?
Aug 17, 2011I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedHome Network :: SSH When Port 22 (and Others) Is Blocked?
Sep 15, 2011I have a home server running CentOS 5 and is accessible over SSH (port 22).When I am at work I am behind a firewall that blocks all ports except the ones needed. So port 22 is blocked to the outside world.Is there a way for me to get an SSH connection to my server? (ie: SSH tunneling or so?)by the way, websites with advanced web based SSH javascript(s) such as serFISH are blocked as well.
View 7 Replies View RelatedHome Network :: Port Forwarding Not Working?
Feb 20, 2013I want to setup port forwarding in my office router so that i can access my lan computer (192.168.0.122) from any where in the world through (remote desktop connection)I have (D-Link (DIR-615)) router. I went to virtual server option. then i select application name as Remote desktop then public port as (3389), protocol (both), Schedule (Always).My lan computer ip address (192.168.0.122), private port (same 3389), inbound filter (allow all). then i clicked save settings. Then the router took 20 seconds to save. then i close the browser.Then i asked my brother to connect through remote desktop connection who is on the skype and he is in different country and that time he is in office. So he put my router public ip address (xxx.xxx.xxx.xxx:3389) in this format but unable to connect.
View 2 Replies View RelatedSwitch And Router For 24-port Home Network?
Jul 6, 2011So I am contemplating the setup for the network in my new home, how to connect 24+ ethernet ports in the house to a single network. I was thinking of getting a nice dual-band wireless router, but those usually only come with 4 or so lan ports. How would I then utilize a large 24- or 48-port switch to connect everything to the router?
View 2 Replies View RelatedHome Network :: Traffic Redirection From Port 8080 To 80
Sep 5, 2012wondering if redirection or conversion port 8080 into port 80 is possible? if so how and what cisco equipment can do that?
View 11 Replies View RelatedHome Network :: Static Port Address Translation?
Mar 24, 2011In my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.
View 3 Replies View RelatedHome Network :: Two Internet Connections And Port Forwarding
May 25, 20121. a LAN with about 10 pcs, a router and a shared internet connection which is connected to the router.
2. One of the PCs is a server, and is accessed from outside. the port 2230 is forwarded to it in the router.
Now the matter is, as the server uses a shared internet connection which is always very slow,I decided to have a dedicated internet connection in the server by adding an extra NIC.but what happens is when the outsiders try to connect to the dedicated internet connection IP address,the port 2230 is not forwared to the server pc.If I dissable LAN in this PC then the outsiders are able to connect.
Home Network :: TL-WR340GD - Port 80 Blocked At Random Points Of Time?
Apr 15, 2012The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
Cannot Port Forward Or Open Port For Utorrent
Sep 18, 2012I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedLaptop Refuse To Connect To Wireless?
Aug 16, 2011recently one of the two laptops i have at home started to occasionally refuse to connect to the internet through wireless, the other laptop still works perfectly, both are running windows 7. The story is in my building you have to connect twice. the 1st is to connect to the wireless (which both laptops do with no problem). Then you get a pop up (or open a browser) that tell you further log in is required. when you open the browser you put in the 2nd set of log in info and away you go.Recently one of the two laptops started to occasionally refuse to open the 2nd log in page once i open the browser. leaving me stranded out of the internet. Usually i play around with things and it just fixes itself. This tends to happen at random and with no pattern. it works for few days and then it happens again.
View 5 Replies View RelatedHow To Open Udp Ports On Home Gateway Router
Aug 26, 2012How to open udp ports on my home gateway router
View 3 Replies View RelatedFirms That Refuse To Stop Sending Email?
Feb 10, 2011Firms that refuse to stop sending me emails, when I keep telling them to stop.
View 4 Replies View RelatedTp-link Tl-wr841n - Some Laptops Refuse To Work With Wifi
Sep 8, 2012Before yesterday, there was 5 computers that our family used with access to the internet: one desktop computer with access to the internet via an ethernet cable attached to the wireless router, and 4 laptops- 3 dells, and one mac. All of them worked apsolutely fine.However, yesterday, my father brought in a new dell laptop. Once he connected it to our wireless, the internet on my laptop (a dell) stopped working. His new laptop coudn't get access either. Meanwhile, all the other computers had internet access.
View 5 Replies View RelatedDell :: N5010 - Internet Explorer Cannot Open MSN Home Page
Aug 21, 2012I have an Inspiron 15 Intel N5050. Internet explorer cannot open [URL] This is the factory set home page. After a short while I get a message. A website wants to open web content using this program on your computer. Name: Supportsoft Container Publisher Supportsoft Inc. I haven't heard of this software, so I am worried about down loading a virus if I click on allow. I'm able to access other websites without any problem. How can I restore my homepage?
View 3 Replies View RelatedSMC2804WBR Router - Internet Is Very Slow And Refuse To Load Some Websites
Jun 24, 2011I have an SMC2804WBR router. It runs slowly and refuses to even load some web sites. If I unplug it for half an hour, it works fine for three or four minutes and then slows right down again. SMC support told me to reset and reconfigure the settings. I tried it twice. It made no difference at all. It works fine for a few minutes after it has been unplugged but then slows right down. I have the cable connection plugged into a PC running Windows 2000 and that is where I have the router plugged in as well. This is not the machine I use on a daily basis. I use a MacBook Pro via wireless. If I purchase a new router that says the operating system can be OS X or at least XP, can I configure it from the MacBook and will it still work with the PC running on Windows 2000? I was thinking of scrapping the SMC and getting a Linksys E1200-CA.
View 1 Replies View RelatedCisco Switching/Routing :: 3550 Refuse To Connect With 2950
Nov 12, 2012We have a core switch Catalyst 3550-24-PWR
Connected are 2 Catalyst 2960 PoE-24 and one Catalyst 2950-24
3550 together 2960 works well
2960 together 2950 works well
3550 connected with 2950 refuse to establish connection. Port goes down immediately.
Example
3550 Fe0/19+Fe0/20 -> 2960 G0/1+G0/2 status OK
3550 Fe0/21+Fe0/22 -> 2960 G0/1+G0/2 status OK
2960 Fe0/12 -> 2950 Fe0/24 status OK
3550 Fe0/8 -> 2950 Fe0/24 status down
What Is Open Port 49153
May 12, 2012What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.
View 1 Replies View RelatedOpen Port 22 To My Router?
Sep 5, 2011how do i open port 22 in my router
View 1 Replies View RelatedCan't Open Port 88 Being Used By Another Program
May 29, 2012My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies View RelatedCan't Seem To Open Port For Camera
Dec 10, 2012I have an IP camera (foscam). It's connected to my wireless router. My router is connected to my motorola cable modem. My isp is Cox.I want to be able to view this camera from outside (ie: when I'm at work) by going to http://(my real ip) : (port). Port that I use is 88. I can't seem to do this.
First I set the port 88 to the camera's config. I can see the camera when I'm at home (going to 192.168.1.106:88). Reading the manual, I need to forward the port 88. So I go to my linksys wireless router 192.168.1.1 and single-port forward 88 UDP TCP (both) to 192.168.1.106.This doesn't solve the problem.I go to Open Port Check Tool and put in port 88 and it says I could not see your service on (my real ip) on port (88)
How To Open A Port In Windows Xp
Jun 14, 2011I have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port
View 1 Replies View RelatedHow To Open Port On Router
Feb 15, 2012i have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies View RelatedServers :: Have Ip And Open Port But Can't Connect
Feb 21, 2011i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it
View 2 Replies View Related