Home Network :: Traffic Redirection From Port 8080 To 80
Sep 5, 2012wondering if redirection or conversion port 8080 into port 80 is possible? if so how and what cisco equipment can do that?
View 11 Replies
ADVERTISEMENT
Linksys Wireless Router :: E4200 - Open Port 8080 To All Machines On Network?
Aug 17, 2011I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedHow To Block Port 8080
Feb 23, 2011how do I block / unblock ports in ASA Firewall 5500 series?
View 2 Replies View RelatedCisco Firewall :: 5505 Static Nat With Port Redirection 8.3 Access List Using Un-Nat Port
Aug 15, 2012I am having difficulty following the logic of the port-translation. Here is the configuration on a 5505 with 8.3,So I would have thought the outside access-list should reference the 'mapped' port but even with 3398 open I cannot remote desktop to the host. If I open 3389 then I can connect successfully.
View 12 Replies View RelatedCisco WAN :: 8080 / Destination NAT To Redirect Outgoing HTTPS Traffic To A Local Server
Jul 14, 2011I have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443
Cannot Access Local App Server On Port 8080
May 23, 2011I'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies View RelatedLinksys Wireless Router :: E4200v2 And Port 8080 Over Wifi
May 27, 2012I am trying to scan a directv device that is connected on my lan it uses port 8080. My hardwired machine returns the expected data, any call from a device connected via my wireless network returns a page can not be displayed. It appears as if the router is blocking ports 8080 over wifi only.
View 4 Replies View RelatedCisco Firewall :: Redirect Http / Https To Port 8080 PIX 6.3?
Feb 27, 2013I need to redirect all http and https traffic from one source in a dmz network, to port tcp/8080 on a proxy server on the inside network.
The source device doesn't handle proxying very well, so i've been advised to redirect the tcp/80 and tcp/443 ports to tcp/8080 as it passes through the firewall.
Scenario is thus:
PIX 515E 6.3 (5)
DMZ server: 172.31.255.250 (Real IP), 10.44.181.236 (NAT IP)
Inside Proxy server: 10.44.132.28 (Real IP), 172.31.255.110 (NAT IP)
I've configured a static NAT redirect using the following command: static (inside,dmz) tcp 172.31.255.110 www 10.44.132.28 8080 netmask 255.255.255.255 0 0
When I try to add the next command of: static (inside,dmz) tcp 172.31.255.110 443 10.44.132.28 8080 netmask 255.255.255.255 0 0
I get the following error: ERROR: duplicate of existing static
Is there a work around for this at all or am I stuck with the limitations of the software?
Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?
Feb 24, 2013I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
Cisco Switching/Routing :: 1841 Forward Port 8080 From Global To Local IP
Jan 5, 2012I have a cisco 1841 and I am hooking up some cameras onto my network. My global IP is 64.190.170.2 and my internal IP which is going to my cameras DVR is 192.168.1.15. I need to be able to forward port 8080 from my global IP to my local IP so i can view my DVR remotely. What is the command i need to put in my Cisco 1841 to forward this port?
View 2 Replies View RelatedCisco Firewall :: PIX 515E Port Redirection?
Nov 30, 2011I'm trying to use port redirection to allow outside access to a internal web server. As far as I can see, everything is configured properly. The Open Port Checker tool from yougotsingle.com says that the port (80) is open. However when I goto access it the connection times out. The external address is static from my ISP, and I will call it xxx.xxx.xxx.xxx. The server is at 10.1.1.20, and is functioning properly over the LAN.
View 7 Replies View RelatedCisco Application :: Tcp 3636 - How To Configure CSS Port Redirection
Oct 11, 2011I have CSS in single arm deployment model. I want to configure port redirection for the servers. Servers are actually running web service on port TCP 3636. Which is accessibale by VIP http://192.168.200.87:3636 but I dont want to give user this URL I want the user to use standard HTTP URL as mention below, I want user to open http://192.168.200.87 and once they access this URL automatically CSS redirect them to port 3636. How I can achive this. I am using IP addresses for the load balancing.
View 4 Replies View RelatedCisco Firewall :: ASA 5500 - Port Forwarding And Redirection
Apr 3, 2012I'm new at the ASA5500 domain. I have a question: How can I redirect traffic coming on a port to a machine inside the LAN listening to another port ? I would like to use ASDM.
View 1 Replies View RelatedCisco Firewall :: Reverse Port Redirection With ASA 5505?
May 16, 2013We have a singe IP Address in the Internet and want to forward SMTP traffic that hits our ASA Outside Interace to the internal Mailserver.And we like to forward Http Traffic to our Webserver.
Example.
212.23.23.23 Port 25 -> 192.168.1.100 Port 25
212.23.23.23 Port 80 -> 192 168.1.200 Port 80
How do i acomplish that. Which NAT rules do in need?
Cisco Switching/Routing :: 861 - External IP Redirection (Port 80)
Mar 5, 2013I have a little problem with a redirection. When I type my external ip, I am directly connected to my Cisco 861 ( through port 80 (HTTP))
Even if I do a factory default, I always have the same problem. I try to make another redirection on another internal ip , but always same problem...
Cisco Firewall :: ASA 5505 Port Redirection On Same Public Address?
May 26, 2012We have 2 TS (Terminal Servers) and have configured the 1st RDP using my public address (say 8.8.8.8) on port 3389. it is working very well of course. However I need setup my 2nd TS but will use port 7777 on the same public address which is not working.I am using ASDM 6.3 and firmware 8.3.1.Is this a limitation for this IOS?
View 6 Replies View RelatedConnect Wan Port Of Cable Modem To Lan Port Of Home Network?
Feb 26, 2012is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies View RelatedHome Network :: How To See Where Traffic Goes
Aug 22, 2012i have a vpn and want to test the way traffic goes when i connect and disconnect vpn try some stuf, how can i see where my info is transiting , i want to test my vpn reactions to changes ill do.
View 1 Replies View RelatedHome Network :: Port Forwarding Not Access Port
Jul 31, 2011I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies View RelatedHome Network :: How To Route All Traffic Only Via VPN
Aug 21, 2011I am using OPEN VPN in order to connect to a Canadian VPN server.I want ALL internet traffic to ONLY use the VPN connection and no traffic shall pass through my local ISP under any circumstance.In the event the VPN disconnects, I DO NOT want any internet traffic automatically sent via my LOCAL ISP connection. Can I simply disable my LAN network adapter in windows AFTER the vpn is connected? (since vpn uses its own TAP adapter?)
View 2 Replies View RelatedHome Network :: Router Can't Handle Traffic?
May 12, 2011So a BT home hub is a very cheap router, so it seems. And - if you connect a quite a lot of eq to this router, it starts crashing. "It can't handle the traffic.". But what does that mean? Why can it handle the traffic for a while and after a few days it can't anymore. And lets say - some of the eq doesn't really work on the external network, it works on the internal network, and it doesn't need the internet to work for proper functionality. So - what is important then? Which specifications are the important ones?
View 2 Replies View RelatedLogging Network Traffic Of Small Home LAN?
Jun 6, 2011We have a small download limit every month and keep ramming into only days into our billing period. I am trying to identify the culprit but need to find a way to log the traffic of individual IP address (which are all static) on the network to figure out where all the bandwidth is going. Any (preferably free) application that will allow me to monitor this?
Network Infrastructure:
Modem connected to NetGear N2000 (older model) Router 192.168.0.1
Family Desktop - 0.2 (Ethernet)
My Desktop - 0.3 (Powerline Ethernet)
Brothers Laptop - 0.5 (Wireless)
My PS3 - .0.30 (Wireless)
iPods - (Wireless)
Router only tells me when someone is on and can track total network traffic usage not individual hardware.
Home Network :: SSH When Port 22 (and Others) Is Blocked?
Sep 15, 2011I have a home server running CentOS 5 and is accessible over SSH (port 22).When I am at work I am behind a firewall that blocks all ports except the ones needed. So port 22 is blocked to the outside world.Is there a way for me to get an SSH connection to my server? (ie: SSH tunneling or so?)by the way, websites with advanced web based SSH javascript(s) such as serFISH are blocked as well.
View 7 Replies View RelatedHome Network :: Port Forwarding Not Working?
Feb 20, 2013I want to setup port forwarding in my office router so that i can access my lan computer (192.168.0.122) from any where in the world through (remote desktop connection)I have (D-Link (DIR-615)) router. I went to virtual server option. then i select application name as Remote desktop then public port as (3389), protocol (both), Schedule (Always).My lan computer ip address (192.168.0.122), private port (same 3389), inbound filter (allow all). then i clicked save settings. Then the router took 20 seconds to save. then i close the browser.Then i asked my brother to connect through remote desktop connection who is on the skype and he is in different country and that time he is in office. So he put my router public ip address (xxx.xxx.xxx.xxx:3389) in this format but unable to connect.
View 2 Replies View RelatedHome Network :: Port Refuse To Open?
May 3, 2012I have tried to open port 25565. Everything in my router is set as it should be,according to the guides I've followed.
View 3 Replies View RelatedHome Network :: Port 8016 Will Not Open
Jul 27, 2011so i have a server running on the network on 192.168.0.2 gatewway of 192.168.0.1. I am trying to setup a DVR for remote access and all this was working previously. I have setup the server for a VPN server and remote access, DHCP and ROUTER services are not enabled on the server, neither is NAT. This was working previously, now when i try forward port 8016, and connect, it will not open.
View 5 Replies View RelatedSwitch And Router For 24-port Home Network?
Jul 6, 2011So I am contemplating the setup for the network in my new home, how to connect 24+ ethernet ports in the house to a single network. I was thinking of getting a nice dual-band wireless router, but those usually only come with 4 or so lan ports. How would I then utilize a large 24- or 48-port switch to connect everything to the router?
View 2 Replies View RelatedHome Network :: Open Port On A TP-Link WR491ND
Jul 23, 2011I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
Home Network :: Static Port Address Translation?
Mar 24, 2011In my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.
View 3 Replies View RelatedHome Network :: Two Internet Connections And Port Forwarding
May 25, 20121. a LAN with about 10 pcs, a router and a shared internet connection which is connected to the router.
2. One of the PCs is a server, and is accessed from outside. the port 2230 is forwarded to it in the router.
Now the matter is, as the server uses a shared internet connection which is always very slow,I decided to have a dedicated internet connection in the server by adding an extra NIC.but what happens is when the outsiders try to connect to the dedicated internet connection IP address,the port 2230 is not forwared to the server pc.If I dissable LAN in this PC then the outsiders are able to connect.
Home Network :: No Open Ports Despite Port Forwarding
Jul 10, 2012I'm struggling to set up an SSH router and it always looks like the port is closed...
Here's my set-up
www>D-Link router (ADSL connection)>Linksys router (+Tomato)>Target PC
I have set up the Linksys router to be an SSH server running Tomato as described in many other forums. The "Tomato router" sits behind my ISP-provided D-link-2680 router.
The internal IP of the Tomato router is 192.168.1.200 and if I try: Code:
Cisco Switching/Routing :: 6509 - Block All FTP Traffic On Port 21 From Servers In Network
Oct 3, 2012I am attempting to block all FTP traffic on port 21 from the servers in my network, and only allow FTP from one server to go out.
I have created the following ACL
access-list 101 Permit ip any any
access-list 101 Permit 21 1.1.1.1 0.0.0.0 any
access-list 101 Deny 21 any any
and have applied it to my truck VPN that goes up to my firewall
int Vlanxxx
ip access-group 101 out
But when i test ftp is still allowed by all servers.
Home Network :: TL-WR340GD - Port 80 Blocked At Random Points Of Time?
Apr 15, 2012The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.