How To Block Port 8080
Feb 23, 2011how do I block / unblock ports in ASA Firewall 5500 series?
View 2 Replies
ADVERTISEMENT
Cannot Access Local App Server On Port 8080
May 23, 2011I'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies View RelatedHome Network :: Traffic Redirection From Port 8080 To 80
Sep 5, 2012wondering if redirection or conversion port 8080 into port 80 is possible? if so how and what cisco equipment can do that?
View 11 Replies View RelatedLinksys Wireless Router :: E4200v2 And Port 8080 Over Wifi
May 27, 2012I am trying to scan a directv device that is connected on my lan it uses port 8080. My hardwired machine returns the expected data, any call from a device connected via my wireless network returns a page can not be displayed. It appears as if the router is blocking ports 8080 over wifi only.
View 4 Replies View RelatedCisco Firewall :: Redirect Http / Https To Port 8080 PIX 6.3?
Feb 27, 2013I need to redirect all http and https traffic from one source in a dmz network, to port tcp/8080 on a proxy server on the inside network.
The source device doesn't handle proxying very well, so i've been advised to redirect the tcp/80 and tcp/443 ports to tcp/8080 as it passes through the firewall.
Scenario is thus:
PIX 515E 6.3 (5)
DMZ server: 172.31.255.250 (Real IP), 10.44.181.236 (NAT IP)
Inside Proxy server: 10.44.132.28 (Real IP), 172.31.255.110 (NAT IP)
I've configured a static NAT redirect using the following command: static (inside,dmz) tcp 172.31.255.110 www 10.44.132.28 8080 netmask 255.255.255.255 0 0
When I try to add the next command of: static (inside,dmz) tcp 172.31.255.110 443 10.44.132.28 8080 netmask 255.255.255.255 0 0
I get the following error: ERROR: duplicate of existing static
Is there a work around for this at all or am I stuck with the limitations of the software?
Linksys Wireless Router :: E4200 - Open Port 8080 To All Machines On Network?
Aug 17, 2011I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedCisco Switching/Routing :: 1841 Forward Port 8080 From Global To Local IP
Jan 5, 2012I have a cisco 1841 and I am hooking up some cameras onto my network. My global IP is 64.190.170.2 and my internal IP which is going to my cameras DVR is 192.168.1.15. I need to be able to forward port 8080 from my global IP to my local IP so i can view my DVR remotely. What is the command i need to put in my Cisco 1841 to forward this port?
View 2 Replies View RelatedHow To Block Port 80
Mar 14, 2011How to block port 80 IN xp
View 1 Replies View RelatedHow To Block A Port On Local PC
Sep 25, 2011I dont currently have access to the router and i was wondering is there a anti-virus program that allows you to block ports to the local pc? Or is there another way to block programs using peer-peer network connections such as PPS.
View 3 Replies View RelatedCan't Connect To 192.168.2.8:8080
Jul 29, 2011I've just installed a new app on my Android phone called PushDoc, for wireless file transfer between phone and PC. It tells me to point my browser to 192.168.2.8:8080/ but every time I do, I get a can't connect message. I've tried turning off my firewall, even though I know it's a local address, but of course it made no difference.
View 3 Replies View RelatedBlock Port 443 Only For Skype In Tp Link Router?
Jul 24, 2012Except email, we want to block every thing for users temporarily through router.If I block all ports from 400 to 65334, skype doesn't work but email also doesn't work.If I open only port 443 among blocked, both email and skype works.
View 1 Replies View RelatedD-Link DIR-655 :: Outlook / Exchange Port Block
Aug 22, 2011I can connect to Internet perfectly fine. I can even VPN back into my office. However, once connected via VPN and I launch my Outlook Client, I'm not able to connect to get emails. When I run a "netstat -a", I get my "SYN_SENT" to all my office domain controllers and exchange servers.However, if I connected via my Starhub USB Broadband dongle, everything works perfectly fine.What settings do I need to do on my router? I tried port forwarding and application rules but none worked.
View 4 Replies View RelatedCisco Security :: Block Port 135 Using CSA 6.0.2.145 On Windows 7?
Mar 13, 2011I have installed CSA on windows 7 with rule to block rpc port 135.But when i am scannig this host, this port is still opened.I changed OS to Win Vista,Win7 x86, but there is no changes.Is it possible to block port 135 using CSA on windows 7?
View 2 Replies View RelatedCisco WAN :: 7200 - How To Block SMTP Port 25 On Router
Jan 24, 2012We are running ISP and now a days we have many spam in our network, we want block the SMTP port 25 block on Cisco router 7200. So we can block the spam in our network.
View 3 Replies View RelatedCisco WAN :: 2960 - Block Outgoing Multicast On L2 Port?
Aug 2, 2012is it possible to block outgonig multicast L2 frames on an Ethernet port in outgoing direction on a 2960 Switch?
I tried the "switchport block multicast" command, but the description of this feature relates to only "unknown" multicast!?
But what means "unknown multicast"? Even if activated, I see a lot of multicast traffic going out that port: IGMP, PIM, SSDP, HSRP, OSPF, .. and also pings and VLC streams to multicastaddresses (ip igmp snooping disabled).
I also tried to map a "mac access-list" to that port, but the "mac access-group" interface command is restricted to only incoming traffic.
Reason: we assume, that there are a couple of specific enddevices, that might react strange to some multicast. Therefor we would like to block outgoing multicast on that specific ports.
I tested it on a 2960 12.2(53)SE2
Cisco WAN :: Block Some Port From Outside To Inside On Router 2911
Sep 5, 2012What is the configuration for allow port from Outside to inside( 80,21,https...) and i want to allow traffic from outside to inside only 80,https and 21.
View 1 Replies View RelatedCisco Firewall :: Making Webserver On 8080 Available To The Outside On 80?
May 14, 2012We're running three networks (inside, outside and dmz). Inside is 10.0.1.0/24, dmz is 10.0.2.0/24, outside is a static ip allocated by our ISP. We'd like to configure the following:All traffic from the outside to [static provider ip] on port 80 should go to 10.0.2.200 port 8080.
View 14 Replies View Related8080 Understanding Safety Of Open Ports
Oct 28, 2012I am a D-I-Y type of guy and have managed to setup Apache on my LAN and make it accessible via WAN over port 80 and Tomcat on port 8080.I aim to possibly get a home web server up (will calculate the costs), but I need some questions answered about networking.
My understanding on ports are that they can be a risk if left open (which I have done) if there is no service or application listening on my side on those ports.So I take it that leaving those ports open and removing the services or applications that run on my side for these ports is a major security risk?
I noticed though that Xampp (1.8.1) does not allow requests over WAN unless I set my password for Apache. Does setting this password imply that Xampp is safe to use in a production environment?
8080 How To Configure Gateway As Proxy Server
May 21, 2013In my office environment, my machine is configured with an IP address, Subnet Mask and a Default Gateway. The Default Gateway does not allow internet connectivity but is configured to provide us with connectivity to some server based tool.
Now in order to provide us with the internet access, a proxy server is configured via the LAN settings in the IE. The problem here is the Proxy is restricted for some sites that I need like certain technical blogs and all, which it filters out in the blogs category and does not load.
I do have another Gateway server address that I can use in Local Area Connection IPv4 Properties as Default Gateway address which removes this restriction. I thought that this should be configurable to the LAN Settings as a proxy as well. But when I do so, I lose the connection to the internet.
I am not sure if all Gateways can act as proxy servers. Or is there anything that I am doing wrong. I am using the default port 8080 in LAN Settings.I can ask this from the technician but I am not sure if he would be able to answer that as he is just a first level guy. I thought of figuring it out myself.
How Does Firewall Block Or Filter Traffic On Specific Port Or IP Address
Nov 15, 2011How does a firewall block or filter traffic on a specific port or IP address?
View 1 Replies View RelatedBlock 1433 Port With Access List For Specific Ip Address?
Jan 2, 2012I want to block the sql port access of my server to all except few of my ip addresses while access list on Cisco Router IOS how do i do that.
View 3 Replies View RelatedCisco Firewall :: ASA 5510 - Setting Up SMTP Port Block?
Mar 5, 2012how to go about setting up the ASA to block any SMTP traffic outbound except for our Exchange Server. This is in relationship to a SpamBot issue that blacklisted us. I have an ASA 5510 running version 6.2(5) / 8.2(2) with three ports. DMZ, Inside and the Outside interface. Up till today, I only needed to block outside traffic to our internal network which I used the ASDM to configure a rule on the outside interface for an incoming rule. I am assuming I need to create an outgoing rule on the outside interface; however, just to make sure I understand the terminology/traffic flow, I created the rule with my computer as the source (192.168.0.131) with ALL destination and the service as HTTP. My logic, which seems to fail here, is that any traffic from my computer going outbound would be blocked; however I am still able to browse... That said, if I were to change the source as the Exchange server and the Service Type to SMTP, it would not actually block traffic and therefore not solve our problem. I even gone as far as permitting traffic from my computer, expanding the hit counter and I see no hits. So I am no doubt doing this wrong. What I do know, is when I first created the rule, a second rule was automatically created (Implicit rule) that deny all sources and blocked all HTTP traffic until I changed it to Permit?
View 2 Replies View RelatedCisco Firewall :: 5505 Block Port 80 On A Specific Host In LAN
Apr 22, 2012I'm using an ASA5505 (8.4(1)) and would like to block port 80 on a specific host in the LAN so machines in other remote LANs connected via VPN can't access this port on the host. Devices in the local LAN should have access to this port on the host. Here are the commands I'm using:
-access-list block_port extended deny tcp any host 10.20.10.20 eq 80
-access-list block_port extended permit ip any any
-access-group block_port out interface inside
These commands are not working as I would expect them to. When I browse to http://10.20.10.20 from a remote machine over the VPN tunnel I am able to access the host web server.
Firewall Rules To Block All Inbound Internet Access To Web Server Except Port 443
Dec 1, 2012Setup firewall rules that will block all inbound Internet access to the web server except port 443, Setup firewall rules that will block all communication between the two internal networks, except ports 7000 and 1702
View 1 Replies View RelatedRouters / Switches :: How To Block Smas Port Scan Attack In Dir600
Feb 13, 2011I m using DIR600 router. from few days my router shows smas port scan attack detected. then how to prevent this type of attack.
View 2 Replies View RelatedCisco Switching/Routing :: 3550 / Access List - Block One Ip Or Port
Jan 9, 2012I have a layer 3 switch, 3550.I have several vlans on there just for playing around with. One of the vlans, has a vonage linksys box attached to it with a UK number attached. From time to time telemarketers call at 03:00 in the morning, this as I'm sure you can imagine is not much fun. The linksys box gets 192.168.3.3 as it's ip.The switch is connected to a non cisco router at 192.168.0.1
interface FastEthernet0/24
no switchport
ip address 192.168.0.2 255.255.255.0
I was thinking a time based access list would work best I have tried several variations but the phone still rings. I have tried access-list 1 deny host 192.168.3.3 permit ..... and more extensive lists but the phone still rings. I have not applied the time-range yet, so that's not the problem.I have applied the list to the vlan interface and to fa0/24 but it's not working.
Cisco Switching/Routing :: 6509 - Block All FTP Traffic On Port 21 From Servers In Network
Oct 3, 2012I am attempting to block all FTP traffic on port 21 from the servers in my network, and only allow FTP from one server to go out.
I have created the following ACL
access-list 101 Permit ip any any
access-list 101 Permit 21 1.1.1.1 0.0.0.0 any
access-list 101 Deny 21 any any
and have applied it to my truck VPN that goes up to my firewall
int Vlanxxx
ip access-group 101 out
But when i test ftp is still allowed by all servers.
Cisco WAN :: 8080 / Destination NAT To Redirect Outgoing HTTPS Traffic To A Local Server
Jul 14, 2011I have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443
How To Block Particulate Dns Ip Using NAT
Apr 28, 2011I have configured win-2003 server as NAT server. For internet access we are using ip provided by vendor which have restrictions for unwanted and pornographic sites. Still users can get access to any site by changing their DNS ip. How to block all the DNS ip except the one provided by our vendor.
View 8 Replies View RelatedEthernet Run Through 66 Block?
Aug 10, 2011I need to run an ethernet cable of about 60ft from the mpoe to the server closet. The path is rather challenging to pull the cable through. I was told that I could utilize the 66 block in the mpoe and the other 66 block in the server closet to make this run. Is that really possible? Just punch down the 2 pairs?
View 16 Replies View RelatedHow To Block Freegate
Oct 18, 2012I have a problem with the Program Freegate.Which I can not find a way to block it.
View 1 Replies View RelatedHow To Block Only Downloads
Sep 28, 2012We are having bandwidth issue every now then in our corporate network and apparently it is due to some people are downloading music, videos etc.is there any way only download can be blocked?don't have any firewall in place to control that though. We have only our TPLink router and we usually block some domains using it.
View 2 Replies View RelatedHow To Block Downloads In Lan
Mar 5, 2012i am using shared internet connection in hostel with belkin wireless router..how can i block users from downloading files and using torrents..?i hav admin privilages of the router.i hav tried opendns but it blocks only sites and not torrent downloadin.
View 2 Replies View Related