I've just installed a new app on my Android phone called PushDoc, for wireless file transfer between phone and PC. It tells me to point my browser to 192.168.2.8:8080/ but every time I do, I get a can't connect message. I've tried turning off my firewall, even though I know it's a local address, but of course it made no difference.
View 3 Replieshow do I block / unblock ports in ASA Firewall 5500 series?
View 2 Replies View RelatedI'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies View RelatedWe're running three networks (inside, outside and dmz). Inside is 10.0.1.0/24, dmz is 10.0.2.0/24, outside is a static ip allocated by our ISP. We'd like to configure the following:All traffic from the outside to [static provider ip] on port 80 should go to 10.0.2.200 port 8080.
View 14 Replies View RelatedI am a D-I-Y type of guy and have managed to setup Apache on my LAN and make it accessible via WAN over port 80 and Tomcat on port 8080.I aim to possibly get a home web server up (will calculate the costs), but I need some questions answered about networking.
My understanding on ports are that they can be a risk if left open (which I have done) if there is no service or application listening on my side on those ports.So I take it that leaving those ports open and removing the services or applications that run on my side for these ports is a major security risk?
I noticed though that Xampp (1.8.1) does not allow requests over WAN unless I set my password for Apache. Does setting this password imply that Xampp is safe to use in a production environment?
In my office environment, my machine is configured with an IP address, Subnet Mask and a Default Gateway. The Default Gateway does not allow internet connectivity but is configured to provide us with connectivity to some server based tool.
Now in order to provide us with the internet access, a proxy server is configured via the LAN settings in the IE. The problem here is the Proxy is restricted for some sites that I need like certain technical blogs and all, which it filters out in the blogs category and does not load.
I do have another Gateway server address that I can use in Local Area Connection IPv4 Properties as Default Gateway address which removes this restriction. I thought that this should be configurable to the LAN Settings as a proxy as well. But when I do so, I lose the connection to the internet.
I am not sure if all Gateways can act as proxy servers. Or is there anything that I am doing wrong. I am using the default port 8080 in LAN Settings.I can ask this from the technician but I am not sure if he would be able to answer that as he is just a first level guy. I thought of figuring it out myself.
wondering if redirection or conversion port 8080 into port 80 is possible? if so how and what cisco equipment can do that?
View 11 Replies View RelatedI am trying to scan a directv device that is connected on my lan it uses port 8080. My hardwired machine returns the expected data, any call from a device connected via my wireless network returns a page can not be displayed. It appears as if the router is blocking ports 8080 over wifi only.
View 4 Replies View RelatedI need to redirect all http and https traffic from one source in a dmz network, to port tcp/8080 on a proxy server on the inside network.
The source device doesn't handle proxying very well, so i've been advised to redirect the tcp/80 and tcp/443 ports to tcp/8080 as it passes through the firewall.
Scenario is thus:
PIX 515E 6.3 (5)
DMZ server: 172.31.255.250 (Real IP), 10.44.181.236 (NAT IP)
Inside Proxy server: 10.44.132.28 (Real IP), 172.31.255.110 (NAT IP)
I've configured a static NAT redirect using the following command: static (inside,dmz) tcp 172.31.255.110 www 10.44.132.28 8080 netmask 255.255.255.255 0 0
When I try to add the next command of: static (inside,dmz) tcp 172.31.255.110 443 10.44.132.28 8080 netmask 255.255.255.255 0 0
I get the following error: ERROR: duplicate of existing static
Is there a work around for this at all or am I stuck with the limitations of the software?
I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View RelatedI have a cisco 1841 and I am hooking up some cameras onto my network. My global IP is 64.190.170.2 and my internal IP which is going to my cameras DVR is 192.168.1.15. I need to be able to forward port 8080 from my global IP to my local IP so i can view my DVR remotely. What is the command i need to put in my Cisco 1841 to forward this port?
View 2 Replies View RelatedI have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedI am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedFew days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies View RelatedI have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedI'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies View RelatedI just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies View RelatedI got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae. [code]
View 9 Replies View RelatedRecently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists
View 5 Replies View RelatedI'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedI have just built a PC desktop and do not think it has the wireless built-in on the motherboard. I'd like to connect to the local network wirelessly. I know that the easiest answer to this is to get a wireless PCI card. But can I ask that in order to be able to access to the LAN wirelessly, I could plug my PC directly into the wireless access point TP-Link.
View 1 Replies View RelatedFor some reason, I can see the wireless connections on my laptop but not on my Dell Computer. When ever I try to connect on my computer i see no wireless connections at all, i have A wireless USB adapter that use to be on put in the back and recieved wireless connections in the past but now it doesnt, I try the front ports, and nothing works except for one, but that one port doesnt work for some reason, the same thing happens, no connection at all.
View 6 Replies View RelatedI have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies View RelatedI can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.
Command Prompt Message after ipconfig /all:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
[code].....
I have a new broadband connection and I was kinda facing problems connecting wirelessly with my router.So I did go to my router page and then cloned my MAC book's mac id, and it worked fine. I'm able to connect to the internet wirelessly. However, I can't connect to internet from an Windows XP lappy. I have removed, re-added the network, the network is very much identified but the laptop doesn't wanna connect to the internet wirelessly.Both the laptops MAC Book pro and Dell(the one which has XP loaded) were able to connect without any problem in the previous ISP's case but XP doesn't wanna connect to with the new ISP.
View 3 Replies View Relatedi have 3 different lan in my office providing internet to different clients. but i want 3 lan to be connected in one pc so that that 1 pc will become as a server. i have 3 different modems and 3 switches to balance bandwidth. so 3 broadband source are there. should i first connect it from source to that server pc ? or its good if i connect modems and switch and from that 3 cables to server pc. there is another problem is that server pc contains 2 lan ports only how can i connect 3 different lan to it ? i want network such that all client can share files and projects with server and all client.
View 3 Replies View RelatedWhat is the cost effective way of connecting my external hard drive to the TV? My external hard drive can only be connect via USB. Besides getting the expensive PS3 and connecting TV and hard drive to it, what are other devices I can use: Blu ray player?
View 1 Replies View RelatedConnect my pc via my router to my tv that has a Lan connection in it,I have connected my tv to my router via a Lan cable but I dont know were to go from there,
View 9 Replies View Related