Laptop Cannot Connect To Wireless But Can Connect As Wired?
Nov 19, 2011
Recently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists
View 5 Replies
ADVERTISEMENT
Nov 8, 2012
if I have my HP netbook connected to a wired or wireless connection I'm stuck on the "Acquiring network" prompt. I've followed along in previous threads up until a certain point. In the services page DHCP cannot start due to error 1075.
View 6 Replies
View Related
Jun 3, 2011
my laptop, as well as my moms laptop, were working perfectly fine on wedensday. Yesterday however, i was randomly getting kicked off the internet, and i came to realize that whenever both of our laptops were on, only one could connect to the internet. the other one couldn't find the DNS server or whatever.so, after some frustration windows finally told me (on my laptop) that two computers were sharing the same ip address on my network. made sense i guess. so i went to CMD, typed ipconfig /release on my laptop, but it said media was disconnected so it didn't work. i then went onto my moms laptop, typed the same thing in CMD, and it released it fine. but then her battery died so i plugged it in to renew her ip.
once her computer got enough of a charge to turn on i went to cmd and typed ipconfig /renew, but it wouldn't renew it, saying media was disconnected. so, now her laptop and my laptop will not connect to wireless.on my laptop, i transfered my documents to another HDD and did a fresh install of windows. but even since, my laptop will not connect to the internet. when i trouble shoot it it says something about no networking drivers are installed, but i can't even install drivers because i have no internet im on her laptop right now, it will connect via ethernet cable.
View 3 Replies
View Related
Mar 29, 2013
Region : Indonesia
Model : TD-W8151N
Hardware Version : V3
Firmware Version :
ISP :
Recently I bought TD-W8151N wireless adsl router, I have one desktop computer that connected to TD-W8151N via ethernet and wirelessly to one laptop, IP Addr: 192.168.1.4, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : desktop (LAN connection IP Addr: 192.168.1.3, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : laptop (wireless connection) but I can't ping each other and also can't access the share folders between them., both computers can access internet. Is there anything I missed the configuration setting of the router? Before I use wireless, I connected this 2 computers using cross-type utp cable, and working good.
View 5 Replies
View Related
Mar 16, 2012
I want to connect 1 laptop and 2 pc,s to a switch via wired ports. Laptop has WiFi Internet. I DO NOT want internet going to the PC's. Question is will this set-up work for me. all 3 are windows 7
View 4 Replies
View Related
Jan 31, 2011
I've got a PC(windows 7) connected to a wired router(not wifi), and I also have a laptop that shares the internet with the PC using wifi. A wired printer is connected to the PC. Is it possible for me to share files and print using laptop? (Wifi Connected to a Wired Internet connection)
View 3 Replies
View Related
Feb 13, 2013
I'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies
View Related
Mar 11, 2012
I am running Pclinuxos with dsl/wireless but my tv uses only wired so I have to get a wired line to my TV via wireless router I am so confused why I cant just bridge a connection and connect the wire. What can I do I am using a Netgear cable/dsl Prostate wireless Firewall/Print server FPM114P
View 3 Replies
View Related
Feb 5, 2012
I can connect my xbox with the ethernet cable, but i am unable to get it to connect wireless. My laptop & phone are able to connect, I did try the steps such as resetting network configurations, i tried unplugging the router, i know my password is correct. i tried putting in the ip #'s. the xbox is not the only thing that won't connect wireless, neither will the ipod or kobo. it has been suggested that my router may be set for only a certain # of connections?
View 1 Replies
View Related
Aug 29, 2011
i have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
View 2 Replies
View Related
Nov 2, 2012
I have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
View 2 Replies
View Related
Jan 20, 2011
I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN PCs. In this situation everything is fine like internet browsing. The only problem is wireless PCs (192.168.1.x) can't connect with wired LAN PCs (192.168.10.x). The router ip is 192.168.1.1. How can I configure to connect those two subnet's PCs?
View 1 Replies
View Related
Sep 8, 2012
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
View 6 Replies
View Related
Dec 2, 2012
How to connect wireless modem in place of wired modem
View 1 Replies
View Related
Nov 9, 2012
I've recently moved house and have signed up with a new internet provider. I can't connect to the internet with a wired or wireless connection. My partner has got the wireless working perfectly on her laptop and I got wifi working on my phone with no problems, so I think it must be something specific with my computer.
I used a wireless connection in my old house, and I remember it took some time to get that working properly too, so obviously my computer doesn't like change!I'm now getting the IPv4/IPv6 connectivity messages and can't even get close to finding a network.
View 14 Replies
View Related
Apr 5, 2012
I built my first computer yesterday and everything went amazing. Unfortunately, I am having trouble simply connecting to the internet via wired, ethernet, cables. I can connect wirelessly but I need to connect wired as well. My IP when I am only using a wire starts as 169..I know this typically means there is a problem with my router, however, due to the fact that my laptop can use the wire router perfectly fine but my computer doesn't I am at a loss. I have downloaded the ethernet drivers but I don't know what to do.
View 2 Replies
View Related
Aug 1, 2012
The netbook was working fine on wireless network; didnt use it for a couple of days - now I cannot conenct wired or wireless; cannot see the wired or wireless modem , only MSN dial up. But the wireless modem light is blinking steadily. Otherwise the netbook is working OK - it even seems to boot up quicker than it used to)(I would reinstall the OS but it didnt come with OS DVD or a DVD drive ; so I didnt create a backup when I bought it. I have since purchased a USB DVD drive; this is one of two identical netbooks I purchased on black Friday - other one works perfectly?
View 2 Replies
View Related
Jun 19, 2011
I have a wireless network and I have a new TV that has wireless and wired connectivity. I do not have a wired port at the spot where the TV is mounted so I am connecting wirelessly. The problem is the wireless on the TV is pretty flaky and I cannot get consistent connectivity..and every time it can't connect I have to retype in the AP passwords as it doesn't remember them. I would like to switch the network to wired, but can't run an actual wire. Can I add a new wireless AP as a repeater or bridge to tap into the existing wireless network and then connect the TV to the a wired port on the wireless router?
View 10 Replies
View Related
Feb 17, 2013
Can connect to access point using both wired and wireless medium
View 1 Replies
View Related
Aug 9, 2011
I just wanted to know the advantages and disadvantages of wired over wireless network connections
View 2 Replies
View Related
Sep 27, 2011
I have this E4200 for about 3 months and allways has been used as an wireless router. Today i wanted to connect 2 wired computers to it via lan and whatever i do dosnt connect. Dosnt even let me acces the 192.168.1.1 page to router settings.I am on firmware 1.0.02, i also did a full reset and then did set up with cisco connect, did try that thing with the cisco usb connect and still no joy with the LAN conection.
One comp uses win 7 the other is on win xp. I can connect both comps succesfully to other router via the gigabit ports but not to this one.
View 3 Replies
View Related
Aug 31, 2012
I have an E3200 router. I had been experiencing connection problems with my desktop that was wired to the router, and in an attempt to resolve the issue reset the router to its factory defaults. Now, as before the reset, I can connect to my router just fine via Wi-Fi (I have several devices connected this way) but none of the computers that I attempt to connect via ethernet are able to establish a connection. I have tested multiple cables with multiple computers using multiple ports on the router, to no avail. When I view the Status --> Ports page on the router, I can see the ports in use that I am connected to, but that is the only sign of connection that I get.
View 1 Replies
View Related
Mar 18, 2013
I have WRT160N at home and I would like to connect it with router with Ethernet and then connect WRT160N wirelessly with iPad...
View 1 Replies
View Related
Feb 7, 2012
My laptop is the E6420 and I cant connect to the Internet, the little wireless icon doesnt even show up in the taskbar. tried to set up a new network, didnt work, it says the modem's been removed. but no other info.
View 2 Replies
View Related
Aug 12, 2012
I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
View 14 Replies
View Related
Jun 25, 2011
I'm desperately trying to set up my old D-Link DI-524 on my parent's Toshiba laptop...I'm visiting and going thru withdrawals! I've installed it, run the wizard etc but it doesn't work...not even wired. I've tried various cable configurations and I get nothing. Both cables are good and work just fine connected to the modem. I've reset it a few times, upgraded the firmware and still nothing...I'd think I'd at least get it to work hard wired. My laptop can see the network I set up even...but no data transmission. I'm not a wireless expert, but I need to become one fast!
View 3 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Dec 12, 2012
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
Mar 9, 2011
I'm sure it's on here but because I dont understand the name of what I'm looking for, I'm having trouble searching. My main network is setup for wireless via a netgear wndr3700. I'd like to use my old linksys wrt54g v5 to connect to that network wirelessly and allow me to connect my xbox via wired ethernet. Basically instead of buying a wireless adapter for the xbox, i'd like to know if/ how i can use my linksys router instead.
View 13 Replies
View Related
Oct 12, 2011
1. Just got a new DLINK Xtreme N DIR-825 Router. Directly connected this to the internet.
2. Currently, the Linksys WRT54G (1st Generation) is connected to the DLINK by an Ethernet cable to one of the 4 ports on the back.
3. The Linksys further splits the signal to another 2 computers and a NAS by hardwire.
4. The internet is still getting through to all the computers, but the computers are not able to access the NAS or each other.
5. I can't seem to open the WRT54G's access (192.168.1.1) because (I thin) the new DLINK uses a local set of IPs that are 192.168.0.1xx.
I can login to the NAS using its IP, and I can see it on the 'Network Places' of the computers ,but when I try to connect, it says the drive is moved, etc. etc.I use a variety of computers / O.S's on this system: XP (2) hardwired, Win 7 (2) hard wired, Win 7 (1) wireless, Mac OS X Snow Leopard (1) Wireless, plus various other wireless devices (phones,Wii, etc.).
NAS is a Synology DS411+
1) Get logged into my Linksys
2) Get the NAS accepted by other computers on the network.
View 3 Replies
View Related
Aug 24, 2011
Installed E4200 with an iMac running MacOS X Version 10.6.8. Wireless connection works great. Also connected a wireless laptop without a problem. But can't connect a 2nd computer is wired. That is a PC running Vista. I know the wiring is good, because the E4200 is a replacement router in a network that was working fine.
View 1 Replies
View Related
Oct 26, 2011
I have an hp g62 laptop and it has an Atheros ar9285 wireless adapter and a realtek pci-e ff ethernet adapter. For some reason just recently neither will connect to my netgear cable wifi router. I have two smartphones,xbox and two other laptops that connect with no problem. Everything is configured correctly that i can tell and both drivers have been updated. still nothing, it trys to connect but keeps saying identifying then it says no internet access. also i have disabled firewall and entered the security paraphrase twice just to make sure.
View 1 Replies
View Related
