Unable To Connect To Internet Wired / Wireless?
Aug 29, 2011
i have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
View 2 Replies
ADVERTISEMENT
Nov 9, 2012
I've recently moved house and have signed up with a new internet provider. I can't connect to the internet with a wired or wireless connection. My partner has got the wireless working perfectly on her laptop and I got wifi working on my phone with no problems, so I think it must be something specific with my computer.
I used a wireless connection in my old house, and I remember it took some time to get that working properly too, so obviously my computer doesn't like change!I'm now getting the IPv4/IPv6 connectivity messages and can't even get close to finding a network.
View 14 Replies
View Related
May 21, 2011
I have one computer that is unable to connect to the internet. This is a wired desktop running Vista. I have several wireless devices around the house that can connect fine, so I know that it is not the internet. I have tried a system restore, I have reset the router and rebooted the computer. The network diagnostics says there might be a problem with one or more network adapters on this computer....I have tried all of those solutions as well. When I look at the device manager I see a yellow exclamation point beside "isatap.domain.invalid". Does this mean that my network card is out??? Computer is now out of warranty
View 12 Replies
View Related
Aug 18, 2012
Desktop won't connect to internet. I have a Belkin router and my laptops connect to the internet. My Netflix Rokus connects to the internet.I have tried your suggestion with reset winsock and reset IPv4 TCP/IP stack to installation defaults,etc. [code]
View 10 Replies
View Related
Jan 7, 2012
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies
View Related
Mar 2, 2011
My BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem. I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.
View 1 Replies
View Related
Feb 11, 2011
I have a Compaq Presario V3016US Notebook PC. It has Windows XP Home Edition.So onto the problem. If I plug in the Ethernet cord, or try to connect to the Internet wireless,nothing gets picked up.I went into device manager, as I have seen many of you asking whether there is any "Yellow Exclamation" marks, and I found three under the Network Adapters.
View 14 Replies
View Related
Aug 15, 2012
I am unable to connect through my ethernet (wire) whereas my wifi is working smoothly. This is what i get at ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Salman-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
Aug 10, 2012
I'm a college student residing in the dorms a I did last year and over the summer. In both cases i had to move to different housing and internet connection went without a hitch. However i'm now at my new place, and i cant seem to get my desktop computer to connect to the internet. After 8 different campus tech crews came through, they've determined that the connection issue is not caused on their end. The issue as far as i can tell is not caused by the cable either because i got internet access when i bridged the connection using my laptop's wireless connection. I have also used the cable to connect to the internet on my laptop. However, when i try to connect on my desktop it says that that ethernet cable is not connected. No link light comes on, and the connection is not recognized at all.
View 6 Replies
View Related
Nov 8, 2012
if I have my HP netbook connected to a wired or wireless connection I'm stuck on the "Acquiring network" prompt. I've followed along in previous threads up until a certain point. In the services page DHCP cannot start due to error 1075.
View 6 Replies
View Related
Sep 8, 2012
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
View 6 Replies
View Related
Jun 3, 2011
my laptop, as well as my moms laptop, were working perfectly fine on wedensday. Yesterday however, i was randomly getting kicked off the internet, and i came to realize that whenever both of our laptops were on, only one could connect to the internet. the other one couldn't find the DNS server or whatever.so, after some frustration windows finally told me (on my laptop) that two computers were sharing the same ip address on my network. made sense i guess. so i went to CMD, typed ipconfig /release on my laptop, but it said media was disconnected so it didn't work. i then went onto my moms laptop, typed the same thing in CMD, and it released it fine. but then her battery died so i plugged it in to renew her ip.
once her computer got enough of a charge to turn on i went to cmd and typed ipconfig /renew, but it wouldn't renew it, saying media was disconnected. so, now her laptop and my laptop will not connect to wireless.on my laptop, i transfered my documents to another HDD and did a fresh install of windows. but even since, my laptop will not connect to the internet. when i trouble shoot it it says something about no networking drivers are installed, but i can't even install drivers because i have no internet im on her laptop right now, it will connect via ethernet cable.
View 3 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Dec 12, 2012
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies
View Related
Dec 5, 2012
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Just got my new TL-WDR4300 router. Set it up last night with the latest firmware. I can connect to Internet using a wired cable. However, I can't connect to Internet via wifi. I already tried 2 laptops (Vista & Win XP) and 2 tablets - I can see my wifi signal, connect to it (with my password), even obtained IP address (from ipconfig). However, when I tried to open a web page (eg google), it can't connect to Internet (always got timeout or service not found). Again, same laptop has no problem if I use a cable to connect to my router.
View 3 Replies
View Related
Oct 10, 2008
I am having problems with my RV042.I have a Intervoip(url...) account for VOIP.
When I try to register the intervoip account to the internet I don't get any kind of reply. My VOIP server just keeps requesting to register the SIP account, but gets no reply.
When I connect an other router to my ISP modem, the register just goes fine. However the RV042 blocks something I don't really know what the cause could be.I installed wireshark to monitor my network traffic.
When I monitor registering with intervoip with the RV042, I see requests but no replies from intervoip, the VOIP server keeps requesting, but doesn't get any reply.
When I monitor registering with intervoip with an other router, I see requests from the VOIP server, and replies from intervoip initiating my intervoip account and everything goes well and registers. The following I tried:
- Forwarding port 5060 to private ip
- Putting private ip in DMZ
- Disabled the firewall
All without result. (Also tried them all at once)
View 8 Replies
View Related
Aug 17, 2012
Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
View 5 Replies
View Related
Oct 8, 2011
Have a Dell Inspiron 9100 w/ Windows XP. Dowloaded "owners manual" prior to problem. Rather computer illiterate, but homebound after cancer treatment & computer is my LIFELINE ! After painstakingly following step by step troubleshooting guide from Windows AND Dell owner guide, came up w/ "video card disabled". Have a DSL modem from tele. co. & husbands pc does great, but my laptop won't connect to browser via wireless or if I plug it into modem....???
View 16 Replies
View Related
Jun 30, 2012
I am no longer able to connect to wireless internet. I use the free internet from the shop downstairs, I had permission to use it as does the rest of the house.The strange thing is that since my Wifi went down yesterday, I have noticed its also disabled on my smart phone too.The notification says that there is limited or no connectivity and a normal repair only prompts that my PC cannot renew its IP address So I tried to renew and re list the IP setting, flush the DNS, recatalogue etc and still no joy. I have re installed my PCi adapter twice and even used a different card, pulled them out and cleaned the PCi slot...basic housekeeping
An ipconfig command at the command line shows that the IP address isnt your standard 192.168. xx type ...(its something like 165.0.01)...the subnet is normal 255.255.xx A look at the status window in attempt to manually input an IP address instead of the automatic function shows that there is no default gateway...just the odd IP address found when I did ipconfig.Ive also tried a winsock repair..no joy..also I have checked the services.msc and made sure all the relative services are enabled and automatically set.An attempt to connect to a different network ( my smart phones 3g hotspot and also my neighbors wifi) both were successful...so I dont see the problem to be with my PCi adapter......but then again I dont think its the shops router either, as both of my housemates can use the internet on their phones??..they are not tech savvy at all and would defiantly remember if they had recently changed anything or lost the service...usually its me who has to set up their computers or smartphones and they would be banging on my door if they lost the service also!Im unsure if a wrong WPA 2 key would show up as a "limited or no connectivity" notification??..surely it would just say that the key was wrong?
View 4 Replies
View Related
Jan 25, 2013
The problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) CPU B950 @ 2.10GHz
RAM: 4.00GB
Graphics Card: Mobile Intel(R) HD Graphics Family
View 4 Replies
View Related
Dec 17, 2012
My laptop is having trouble connecting to the internet. Some of the time it is fine, but at other times it will not connect to my home wireless network (or any other open ones I can find) despite the network being in full signal.The only advice offered by the troubleshooter is to reset the wireless router. This does work (but is very irritating to flatmates!) but doesn't prevent the problem recurring. Only my computer has an issue, and sometimes it will manage to connect to the internet by itself, seemingly spontaneously. The laptop is set to connect automatically, and when not working it also does sometimes attempt to connect, (i.e. it says 'connecting') but cuts out again before managing it. The problem can last for a few minutes or several hours.
View 1 Replies
View Related
Oct 21, 2011
A few weeks ago I tried to install vmware to my toshiba laptop to play around with is and eventually install Windows server 2008 virtually. Well I didnt complete the installation and set up because I forgot to write down the registration key #. Ever since then I have had a terrible time getting my network reconfigured and have tried everything with Verizon network support over the phone. I am now unable to get a valid Ip address or default gateway with either my Wireless or my LAN connections. I have done all types of troubleshooting, resetting netgear router, modem, ip config /reset /renew,netsh winsock reset catalog commands and etc . . . STILL NOTHING WORKS ! I have another machine that is a mac book on my home wirless network that connects just fine, the only problem is my machine. And I have also taken this machine to my job and try connect to the wireless public network and all I get is "limited access" I ran the network test that Kadar provided and this is what I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : JerryDiaz-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 2 Replies
View Related
Mar 19, 2012
i have a fujitsu siemens laptop amilo using vista, I have error 106 showing unable to connect to internet wireless, I dont know how to turn my wireless on.
View 1 Replies
View Related
May 31, 2011
OS - Vista Home Premium x32 I have a modem (Comcast) connected to my router (Linksys wireless-g /wrt54g v6) connected to my desktop which runs Vista.recently i am unable to connect to internet using my desktop, but I am still able to use my wireless devices such as wii, laptop, phone, ipad etc. with problem When I first boot up computer I receive error UPnP device host has stopped working. I close that and I have no network connections (linksys or LAN connections-icons) in my network and sharing area. Nothing is listed. When i click diagnose issue i receive the follow error A CABLE IS NOT PLUGGED INTO THE NETWORK ADAPTER "LOCAL AREA CONNECTION* 12" I have changed ethernet cords but still the same error. Nothng has been changed and as stated worked fine 2 days ago. I also did IPCONFIG and all i receive are ETHERNET ADAPTER LOCAL AREA CONNECTION* 12 MEDIA STATE.....MEDIA DISCONNECTED and so on. No IP address is listed.
View 4 Replies
View Related
May 23, 2012
I click on available wireless networks, select the network, but when I go to type the password, it won't allow me to type.
View 2 Replies
View Related
Feb 18, 2012
Since i installed windows 7 on my Samsung R530 notebook i am unable to connect to internet through built in network adopter. while on diagnos it appears that network adopter is not found or may be the driver not been installed?
View 1 Replies
View Related
Jan 7, 2012
I have a VirginMedia 50Mps wireless router that runs 4 wired connections. These are all working fine and have Internet connection. When the router was installed I could also connect to the internet wirelessly on my Laptop which is running Windows Vista Home Premium. But of late I have been unable to connect to the Internet on the Laptop. When you place the mouse pointer over the Icon in the bottom right hand corner, the following message comes up : Currenlty connected to:Unidentified(virginmediaxxxxxxxx) (where xxxxxxxx is a numeric identifier for the modem). Access: Limited connectivity or sometimes it says Access : Local only.
View 4 Replies
View Related
Aug 27, 2012
I was provided with a new wireless modem from our internet service provider (the old modem was antiquated and needed updating). After this, i have been unable to connect to the internet on my laptop on a wireless basis. I can search for the modem via the usual means and seemingly connect, but when i am connected it states that i have 'Local Access' only and i am unable to access the internet at all. I am also unable to connect to the internet on a wireless basis when in safe mode.I am however, able to connect using a Ethernet cable from the modem.My laptop is fairly old but it is fine for our needs and thus i do not really want to change it unless totally necessary. I just wonder if it is something relatively simple that i am overlooking?My son also has a more modern laptop, and he tells me that he can use the internet via our new modem without any problems. Which would suggest there is nothing wrong with the modem.The operating system is Windows Vista, if that makes any difference.
View 1 Replies
View Related
Jan 19, 2013
I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies
View Related
Jul 17, 2012
I tried my entire afternoon trying to figure this out but to no avail. Fortunately, I found this place out of my desperation for a solution. My netbook works very well in my home network but when I brought it to my workplace, I was unable to connect to the internet eventhough I could connect to the wireless network. Other computers and laptops were able to connect and use the internet well using the same router. I tried manually configuring my IP and default gateway based on what I read but nothing worked.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, x86 Family 6 Model 28 Stepping 2
Processor Count: 2
RAM: 1011 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 224 Mb
Hard Drives: C: Total - 109474 MB, Free - 7145 MB;
Motherboard: Acer,
Antivirus: Avira AntiVir PersonalEdition, Updated: No, On-Demand Scanner: Enabled
View 7 Replies
View Related
May 30, 2012
Are you able to connect to the internet through wireless?
I tried all the steps mentioned in this thread, but its not working. I've windows 7 home premium on dell studio 1555 with 4 gb ram and 320 gb hdd.
View 4 Replies
View Related
Aug 13, 2012
Due to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.
View 1 Replies
View Related
Sep 15, 2012
I just upgraded my router from an old wireless54G to an E1200.The wireless device I have on my Sony Viao PCG GRT-240G laptop is LAN-Express AS IEEE 802.11g miniPCI Adapter
-Initially I couldn't connect at all with this machine (however the other two newer laptops could) so I contacted the Linksys tech and he advised I should upgrade my laptop driver
-After much research about this I found a common fix was to upgraded drivers from the 2004 sony driver to atheros_wifi_9.2.0.480 drivers.
-After I did the upgrade I can connect to the router on the guest account and use the internet
However, on the Main account I can connect to the router but I have no internet connectionGoogle chrome gives error belowThe server at [url]... can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.How can I use one part of the network but not the other part? Shouldn't both the guest & main accounts use DNS lookup?
View 2 Replies
View Related
