Unable To Connect To Wireless Internet Connection?
Oct 21, 2011
A few weeks ago I tried to install vmware to my toshiba laptop to play around with is and eventually install Windows server 2008 virtually. Well I didnt complete the installation and set up because I forgot to write down the registration key #. Ever since then I have had a terrible time getting my network reconfigured and have tried everything with Verizon network support over the phone. I am now unable to get a valid Ip address or default gateway with either my Wireless or my LAN connections. I have done all types of troubleshooting, resetting netgear router, modem, ip config /reset /renew,netsh winsock reset catalog commands and etc . . . STILL NOTHING WORKS ! I have another machine that is a mac book on my home wirless network that connects just fine, the only problem is my machine. And I have also taken this machine to my job and try connect to the wireless public network and all I get is "limited access" I ran the network test that Kadar provided and this is what I get:
I have had a problem with my WRT400N wireless Linksys router. Whenever my router restarts or if the DHCP lease expires, I'm unable to connect to internet. During this time I can access the router, but not the internet. Oddly something that seems to "fix" this is if I use my nintendo wii to access my wireless internet at that time, all computers on my network are able to access the internet. However this is annoying to do since this happens once a day from DHCP lease expiring. Using any other computer to attempt to access the internet at this time would be unable to get a connection until I do the "fix" with the Wii. WRT400N
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter. [code]
i bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
Have completed a Power Cycle.The affected machine is a HP Elite m9150F desktop. The symptoms include the following:
- neither the LAN connection or the wireless connction will access the internet through Internet Explorer - microsoft email will not send and recieve - Steam will not connect - Norton 360 will connect to live update and download - taskbar icon shows LAN connection is OK - When I open Network and Sharing, the network map shows this pc is connected to internet through named network. - Local Area Connection Status show 197,816 bytes sent and 311,088 recieved.
We have 2 laptops connected to the same wireless network working perfectly. There is also another desktop (Dell 8400) with a LAN connection to the router working perfectly. The affected pc (HP m9150f) is also connected to router with a LAN connection. The D-link Dir-615 wireless router is connected to a Shaw Motorolla modem model SB5102. The HP m9150f stopped connecting a few days ago, other than that, it worked fine.how I managed to get 4 computers running on a network in the first place..
I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter.I am using the fujitsu siemens amilo pi 2515 notebook.netgear dg834g router?
Microsoft Windows [Version 6.0.6000] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:Windowssystem32>ipconfig /all
Windows IP Configuration Host Name . . . . . . . . . . . . : Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No
My dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration Host Name . . . . . . . . . . . . : Dave-PC Primary Dns Suffix . . . . . . . :
I am unable to access the internet even though my wireless connection shows as active and strong. I tried the connection hard wired, but still no access. I ran a malware detector and removed two items, still no internet availability. What should I do?The trouble shooting device says "Firewall may be preventing your program from running". I have McAffee security system installed.
I have a new Inspiron 7520 and having issues with connecting to my secure network. In trying to troubleshoot the issue, I've discovered I can connect to my network when the connection is unsecured. When its encrypted, my connection is only limited (no IP address assign). I've also downloaded and installed the latest drivers with no resolution to my issue.
PC and Network Specifics: PC - Inspiron 7520Wireless Router = Netgear N600 - model WNDR3700Wireless Network - 2.4GHz b/g/n, WPA2-PSK [AES] System - Windows 8, 64-bitWindows IP Configuration
Have a Dell Inspiron 9100 w/ Windows XP. Dowloaded "owners manual" prior to problem. Rather computer illiterate, but homebound after cancer treatment & computer is my LIFELINE ! After painstakingly following step by step troubleshooting guide from Windows AND Dell owner guide, came up w/ "video card disabled". Have a DSL modem from tele. co. & husbands pc does great, but my laptop won't connect to browser via wireless or if I plug it into modem....???
I have a Compaq Presario V3016US Notebook PC. It has Windows XP Home Edition.So onto the problem. If I plug in the Ethernet cord, or try to connect to the Internet wireless,nothing gets picked up.I went into device manager, as I have seen many of you asking whether there is any "Yellow Exclamation" marks, and I found three under the Network Adapters.
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
Region : Malaysia Model : TL-WDR4300 Hardware Version : V1 Firmware Version : 121106 ISP : unifi
i just bought this router and upgraded the firmware. but i cant seem to get Internet connection up and running. it says connected but its not. tried both 121106 and 121226 firmware, still the same. when i checked the connection it says DNS server not responding.
i have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
I am no longer able to connect to wireless internet. I use the free internet from the shop downstairs, I had permission to use it as does the rest of the house.The strange thing is that since my Wifi went down yesterday, I have noticed its also disabled on my smart phone too.The notification says that there is limited or no connectivity and a normal repair only prompts that my PC cannot renew its IP address So I tried to renew and re list the IP setting, flush the DNS, recatalogue etc and still no joy. I have re installed my PCi adapter twice and even used a different card, pulled them out and cleaned the PCi slot...basic housekeeping
An ipconfig command at the command line shows that the IP address isnt your standard 192.168. xx type ...(its something like 165.0.01)...the subnet is normal 255.255.xx A look at the status window in attempt to manually input an IP address instead of the automatic function shows that there is no default gateway...just the odd IP address found when I did ipconfig.Ive also tried a winsock repair..no joy..also I have checked the services.msc and made sure all the relative services are enabled and automatically set.An attempt to connect to a different network ( my smart phones 3g hotspot and also my neighbors wifi) both were successful...so I dont see the problem to be with my PCi adapter......but then again I dont think its the shops router either, as both of my housemates can use the internet on their phones??..they are not tech savvy at all and would defiantly remember if they had recently changed anything or lost the service...usually its me who has to set up their computers or smartphones and they would be banging on my door if they lost the service also!Im unsure if a wrong WPA 2 key would show up as a "limited or no connectivity" notification??..surely it would just say that the key was wrong?
The problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
My laptop is having trouble connecting to the internet. Some of the time it is fine, but at other times it will not connect to my home wireless network (or any other open ones I can find) despite the network being in full signal.The only advice offered by the troubleshooter is to reset the wireless router. This does work (but is very irritating to flatmates!) but doesn't prevent the problem recurring. Only my computer has an issue, and sometimes it will manage to connect to the internet by itself, seemingly spontaneously. The laptop is set to connect automatically, and when not working it also does sometimes attempt to connect, (i.e. it says 'connecting') but cuts out again before managing it. The problem can last for a few minutes or several hours.
I've recently moved house and have signed up with a new internet provider. I can't connect to the internet with a wired or wireless connection. My partner has got the wireless working perfectly on her laptop and I got wifi working on my phone with no problems, so I think it must be something specific with my computer.
I used a wireless connection in my old house, and I remember it took some time to get that working properly too, so obviously my computer doesn't like change!I'm now getting the IPv4/IPv6 connectivity messages and can't even get close to finding a network.
i have a fujitsu siemens laptop amilo using vista, I have error 106 showing unable to connect to internet wireless, I dont know how to turn my wireless on.
I have got a new laptop from work and I cannot get our home wireless to connect. It works on our phones and we can use our neighbours laptop with it but just not ours. It is showing that our wireless is an option but we cannot get onto the internet, page cannot be found/no connection messages come up!
I've recently picked up a E4200 to build a dual band network which is targeting to link up (TV, media server, ps3, laptops) then (maintaining phones etc which only has b/g). While currently only laptops.Before doing any of these I have another cisco modem router DPC3825 which worked fine with giving wireless access.I first attemped to leave the modem router has is and connected the E4200 (ethernet 1 to internet), and changed ip to x.x.0.1 and x.x.0.2 while disabling wireless on the dpc3825 and the DCHP on the e4200 and have default gateway to x.x.0.1. My laptops can connect to wireless on E4200 but it couldn't get internet access.
Then I tried turning the modem to bridge mode & resetted E4200 (factory setting x.x.1.1, auto DHCP), and then connected my devices to both wireless bands. At this point I see router status obtained ip from ISP and Internet reached full speed per ISP's mark but the connection only held up for about 1 minutes. I noticed all the devices still maintained connection to router wirelessly but the router loses internet connection (lost the ip and couldn't get it back).
Purchased E2500 1 week ago. I do not have a problem communicating with the router itself (either hard wired or wireless) but I have been unable to establish a usable internet connection from the router.I live in building that is wired by Restech Services - Ethernet jack in wall - no modem. Connection works just fine if I bypass router and connect directly to PC (windows XP SP3 desktop or windows 7 laptop.),Very difficult to establish any internet connection at all. I have to renew IP address many times or go through re-boot sequence multiple times. Once I get a connection it is unusable. If I attempt to ping a URL (either from PC or from router admin page) it is unable to resolve host. If I ping an IP directly (either from PC or router administrator page) I typically get 60 to 80% packet loss. As noted, if I bypass router and make internet connection directly to PC - no problems - no packet loss.Used Cisco Connect software to set up. On advice of ISP changed MTU from 1500 to 1300. Also registered MAC id with ISP and changed from cloning PC MAC to using the router MAC. Downloaded and installed latest firmware version. Did factory reset and re-configured the whole thing. Double checked and swapped wiring.
OS - Vista Home Premium x32 I have a modem (Comcast) connected to my router (Linksys wireless-g /wrt54g v6) connected to my desktop which runs Vista.recently i am unable to connect to internet using my desktop, but I am still able to use my wireless devices such as wii, laptop, phone, ipad etc. with problem When I first boot up computer I receive error UPnP device host has stopped working. I close that and I have no network connections (linksys or LAN connections-icons) in my network and sharing area. Nothing is listed. When i click diagnose issue i receive the follow error A CABLE IS NOT PLUGGED INTO THE NETWORK ADAPTER "LOCAL AREA CONNECTION* 12" I have changed ethernet cords but still the same error. Nothng has been changed and as stated worked fine 2 days ago. I also did IPCONFIG and all i receive are ETHERNET ADAPTER LOCAL AREA CONNECTION* 12 MEDIA STATE.....MEDIA DISCONNECTED and so on. No IP address is listed.
Since i installed windows 7 on my Samsung R530 notebook i am unable to connect to internet through built in network adopter. while on diagnos it appears that network adopter is not found or may be the driver not been installed?
I have a VirginMedia 50Mps wireless router that runs 4 wired connections. These are all working fine and have Internet connection. When the router was installed I could also connect to the internet wirelessly on my Laptop which is running Windows Vista Home Premium. But of late I have been unable to connect to the Internet on the Laptop. When you place the mouse pointer over the Icon in the bottom right hand corner, the following message comes up : Currenlty connected to:Unidentified(virginmediaxxxxxxxx) (where xxxxxxxx is a numeric identifier for the modem). Access: Limited connectivity or sometimes it says Access : Local only.
I was provided with a new wireless modem from our internet service provider (the old modem was antiquated and needed updating). After this, i have been unable to connect to the internet on my laptop on a wireless basis. I can search for the modem via the usual means and seemingly connect, but when i am connected it states that i have 'Local Access' only and i am unable to access the internet at all. I am also unable to connect to the internet on a wireless basis when in safe mode.I am however, able to connect using a Ethernet cable from the modem.My laptop is fairly old but it is fine for our needs and thus i do not really want to change it unless totally necessary. I just wonder if it is something relatively simple that i am overlooking?My son also has a more modern laptop, and he tells me that he can use the internet via our new modem without any problems. Which would suggest there is nothing wrong with the modem.The operating system is Windows Vista, if that makes any difference.
I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
I tried my entire afternoon trying to figure this out but to no avail. Fortunately, I found this place out of my desperation for a solution. My netbook works very well in my home network but when I brought it to my workplace, I was unable to connect to the internet eventhough I could connect to the wireless network. Other computers and laptops were able to connect and use the internet well using the same router. I tried manually configuring my IP and default gateway based on what I read but nothing worked.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit Processor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, x86 Family 6 Model 28 Stepping 2 Processor Count: 2 RAM: 1011 Mb Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 224 Mb Hard Drives: C: Total - 109474 MB, Free - 7145 MB; Motherboard: Acer, Antivirus: Avira AntiVir PersonalEdition, Updated: No, On-Demand Scanner: Enabled
Due to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.
