Linksys Wireless Router :: E4200 Cannot Connect With Wired LAN
Sep 27, 2011
I have this E4200 for about 3 months and allways has been used as an wireless router. Today i wanted to connect 2 wired computers to it via lan and whatever i do dosnt connect. Dosnt even let me acces the 192.168.1.1 page to router settings.I am on firmware 1.0.02, i also did a full reset and then did set up with cisco connect, did try that thing with the cisco usb connect and still no joy with the LAN conection.
One comp uses win 7 the other is on win xp. I can connect both comps succesfully to other router via the gigabit ports but not to this one.
View 3 Replies
ADVERTISEMENT
Aug 24, 2011
Installed E4200 with an iMac running MacOS X Version 10.6.8. Wireless connection works great. Also connected a wireless laptop without a problem. But can't connect a 2nd computer is wired. That is a PC running Vista. I know the wiring is good, because the E4200 is a replacement router in a network that was working fine.
View 1 Replies
View Related
Oct 11, 2012
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies
View Related
Aug 10, 2011
I see on the control panel that there is MAC filtering for the wireless connections. I don't see a similar control panel for computers that are wired directly to the router. Where do I find this?
View 3 Replies
View Related
Jan 12, 2013
my general internet connectivity with my e4200.I have a new but similar problem today with the same router.After powering down equipment and moving it around, my wired connections all error. Error in that they will not get an IP address nor will they connect to the internet or each other.My wireless connections still work flawlessly.
I tried powering down the devices over night (to avoid any heating issues) and then powering up but the results are the same. I am obviously missing something, and don't really want to start my network from scratch again...
View 5 Replies
View Related
Dec 8, 2011
I have an E4200 router & am trying to get it to work with ATV2 through HomeSharing & iTunes. It works fine when my PC is wireless & the ATV2 is wireless. BUT, when the ATV2 is wired via ethernet & the PC is wireless -- nothing!
PC is Win 7 64 - SP1
ATV2 is 4.4.3 (3323) and the router is:
E4200 is 1.0.03 build 14
View 4 Replies
View Related
Jul 14, 2011
I'm trying to fix the network at a student housing building and the system is kind of a mess. We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to. We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work. Switch back to the old router and presto. How do I need to change the settings with the E4200 to get it to work?
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?
View 4 Replies
View Related
Jan 2, 2012
I lost all Internet connnecitivity on my Linksys e3000. After determining that my cable modem was connected and working correctly, I pulled the e3000 and put my old wrv54g router in place. Wireless worked, but all wired connections showed link but no other apparent connectivity. Neither of my desktops could get a DHCP lease.
At that point, I purchased and manually installed a new e4200 router. All worked fine. Both laptops connected via wireless and both desktops via my house LAN. Until this morning (Monday). Wireless is working just fine, but both wired computers show 100 Mbs connections on an unknown network with no DHCP. Checking status shows packets going out, but nothing coming in. Checking LAN status on the router shows that both ports are connected, but it does not appear to receive anything from either desktop. All was fine last night. Oh, the router is on 1.0.03 firmware.
I have tried about everything I can think of. Configurations both on the router and the desktops (one Windows XP, 64 bit and one Windows 7) and all seems fine. I have disabled and reenabled the network connectors, rebooted both the router and the computers, etc. Nothing seems to work.
View 5 Replies
View Related
Sep 6, 2011
Can we disable wireless totally in E4200 and just use wired connections? I didn't see any configuration for that, but just in case I missed it. I'm also aware we can disable SSID Broadcast.
View 1 Replies
View Related
Jul 31, 2012
My router was working just fine forever, the only computer that will connect VIA wire is my desktop, everything else for it to connect to my network it has to go wireless. Things like my blu ray player just will not connect. I am not an expert at all, but why is only the wireless working? I can use the Cisco connect and adjust the settings if need be.
View 5 Replies
View Related
Nov 28, 2011
I just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.
View 2 Replies
View Related
Apr 21, 2012
I saw one post recommending to changing the MTU from 1500 to 1400. That did absolutely nothing. My comcast internet is now slower than 14.4 dial up modem I had 16 years ago. The strange thing is I can sometimes download at over 2 mbps with torrents. It's mainly loading websites where the speed is so bad.
View 9 Replies
View Related
Sep 6, 2011
As soon as i modify my wireless to be unsecured, I looy ability to usse me the internet on all wired ports as well as all wireless. From the routers point of view it still has a good solid internet connection. Passes traceroute, but wont allow any wired or wireless connections on the internet. I'm trying to get a Linksys WRE54G v1 to work with this so my parents can have internet once more. If i manualy remove the security to allow the one touch Auto configuration button to work i loose my ability to surf until i run the Cisco Connection software to turn back on the passwords.
View 7 Replies
View Related
Dec 16, 2012
I own a E4200 v1 router and recently discovered that wired and wireless devices cannot talk to each other.Their IP address are acquired through DHCP and inside the same network, but cannot talk to each other by any means, such as ping or http connection.I tried switching wired device to wireless and this actually solve the problem. I've searched and seen thread talking about "AP isolation" settings in advanced wireless setting, but there's no such setting page in my router (running on v1.0.5 firmware). I've already disabled any filtering and firewall function on the router, but still no good.
View 1 Replies
View Related
Sep 10, 2011
I'm currently using onboard lan card of P6X58D Premium. However in the Cisco web setup page or even in my Windows 7, it shows only 100Mbps connection. I tried to force to 1000Mbps but it failed to get an IP. I did a google and found that may be the router doesn't do well with Intel card, but I use another onboard lan card with Nivida chip+AMD CPU, it's still only have 100Mbps. What can I do to have a 1000Mbps connection?
View 5 Replies
View Related
Dec 22, 2011
So I have installed my new E4200 version 1 and I am disappointed with the speeds. My computer has a wireless N card and gigabit Ethernet compatibility. I am currently getting a miserly 54 mbs wireless and 100 mbs on the wire (connected with cat6 all the way)... Anything I should try to get close to advertized speeds?
View 9 Replies
View Related
Mar 24, 2013
I just upgrade my service with Comcast so I can now get up to 50Mbps, however the modem when directly connected to the PC can obtain these speeds, it does not when the PC is connected to the E4200 router. In fact the Cisco Connect speed test shows the upload speeds (10+ Mbps) to be faster than the download speed(4.82 Mbps). I upgraded the firmware to the latest level but it did not make a difference.
View 4 Replies
View Related
Mar 14, 2011
How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies
View Related
Nov 29, 2011
I just connected my new E4200 router, it worked fine until it recommended updating, as soon as it connected to do this, the power light started blinking every second and it will no longer respond. Support has not facilitate.
View 9 Replies
View Related
Feb 19, 2013
I've had this router for just over a year now so the warranty is out and it just so happened to stop functioning last night. I'm fairly decent in the router world since I am studying for my CCNA, so I have tried just about anything imaginable. I woke up this morning with no connection, checked the modem, then the router. The router was powered on, but the up/downstream lights were not doing a thing. The modem is not the issue (I am hardwired as of now). I have tried both resets, including unplugging the device, and still can't get a response out of it. The logo light will turn straight on (no fad in and out like it's suppose to) and then it does absolutely nothing. I have never encountered this sort of problem on a home router before. I can't login to the router either.
View 5 Replies
View Related
Dec 10, 2011
I have 2 E4200's . One is connected to my ADSL Modem as DHCP and the other one is Bridged to the DHCP. I'm trying to connect to my E4200 that is set as Bridged. I am able to connect to my E4200 that is set as DHCP, but I cannot connect to the E4200 that is connected to that DHCP as Bridged.
How can I connect to that bridged E4200 because I want to upgrade the Firmware of the Bridged E4200?.
View 1 Replies
View Related
Aug 26, 2012
Been having problems connecting an old WGA54G v2 (firmware 1.16, March 29, 2005) to a new E4200 v2 (firmware 2.0.36) via WPA. I can get the two to connect using no encryption or WEP but not WPA. Using WEP is not an option for me,E4200 v2 wireless settings:
1. 5GHz broadcast is off, 2.4 GHz is on.
2. Network Mode - Mixed
3. Security Mode - WPA2/WPA Mixed Mode
4. Channel Width - Auto
5. Channel - Auto
6. Guest Access broadcast is off
WGA54G v2 settings:
1. SSID - same as router
2. Network type - Infrastructure
3. Security - enabled
4. Pre-shared key - same as router
5. Encryption - WPA Pre-shared Key, TKIP (tried AES, but still no connection)
Also, tried different WPA network modes on the router (Mixed, WPA personal, WPA2 personal etc.) to no avail. Switched between mixed, B and G network modes as well on e4200 v2 but still no connection. My guess now is that the WPA on the gaming adapter and the WPA on the router are just not compatible, as completely asinine as that sounds. Thought about updating firmware on the WGA54G v2 but checked in the download section here and the last firmware available is 1.13 (appears older than my 1.16, even though the 1.13 release date listed is a month after my 1.16).
View 4 Replies
View Related
Jul 14, 2011
On the 2.4ghz side, I'm set up on the cleanest channel (per inssider) which is 6, channel width is auto (although I've tried it fixed at 20 also), N-only, and security is WPA2 personal. WMM support is enabled. I'm running firmware 1.0.02 The laptops continually stay around 72mpbs, occasionally jumping to numbers in the 100 range... twice I saw it actually hit 144. Inssider shows the max rate as 144, while other N networks in range are as high as 270. I'm sitting right next to the router with 5 bars -- why is the max rate 144? Why won't it run at 300?
View 9 Replies
View Related
Feb 27, 2011
So I purchased a Linksys E4200 a couple weeks ago from Best Buy (got the $149 price) and finally got around to setting it up last Thursday. Before I get to my problem, I am happy to say that I have not experienced the "blinking light" syndrome that seems to plauge a number of other owners. In fact, the E4200 is everything I hoped it would be ... except for one problem. I cannot get my sister's Acer Aspire One netbook to connect to it.
It's really strange actually; the netbook picks up the 2.4GHz SSID fine (it's set to mixed mode) and upon selecting it and I input the WPA2-Personal password no problem. Then, it takes forever to finally aquire a network address, like at least 3 full minutes (usually this process takes a few seconds). After that, it tells me it is connected to the network with excellent signal strength. Except, despite it saying it's connected, the Internet does not work at all. If I got into the details of the wireless adapter, it tells me that the router/network failed to give the adapter a network address.
[code]...
View 9 Replies
View Related
Jul 30, 2012
after setting up my e4200, I am no longer able to connect to Steam, I instantly get a connection error. I'm told it should work fine with UPNP, and I've even forwarded the proper ports just in case, but I cannot connect. I have latest firmware. Hoping someone else out there has same router and uses Steam.
View 6 Replies
View Related
Jul 26, 2011
1. I will be getting a e4200 on Thursday and was wondering if there is any advantage/disadvantage to using the Cisco Connect or just following instructions for manual setup using the web (I did it that way on my last router 6 years ago but was just following a script).?
2. Can I change things using the web after setting up using Cisco Connect or do I have to always use it:?
3. Finally after I set the router up can I just set up other computers in the house as I do now (just plug them in using wire or search for wireless and put in password)?
View 7 Replies
View Related
Mar 12, 2012
I've switched over from a d-link dir-655 router to the v1 4200. I've been playing around with the 4200 and trying to get it connected to my tv all night long. I have two laptops and two iphones connecting with no issues. I cannot for the life of me get the tv (GT30) to work. It picks up three signals, the 2.4 signal, the 5 signal and the guest signal. The only one that will even connect to the internet is the guest signal. When I run the connection test, however it will not connect to the vierra connect server. I've tried setting it up manually, and anything else that seems obvious. I had no issue with the dlink router at all.
View 1 Replies
View Related
Jun 1, 2012
Router: E4200-V2
Firmware: 2.0.37
Just bought E4200-V2 and happy with the performance, except one thing.After several hours, I could not connect to the router manager both from "Cisco Connect" nor browser.I could resolve this by turn off the router and turn on again, but the same problem will be back after several hours.I tried to reset the router (reset 30 and reset 30/30/30) several times but have no luck.
View 5 Replies
View Related
Apr 15, 2013
I've noticed that my 192.168.1.1 login console was slow loading up on my E4200 V1. The router functioned just fine(wireless and wired). These past few days I tried to log in to set some DNS settings and I cannot access 192.168.1.1.I have tried via wireless and wired. The router powers on still seems to function but won't allow me to load up the admin console page.To my last resort, I held in the tiny reset button and the router seems to have went back to it's default settings (SSID = Cisco#####) but I cannot connect to it. what I can try to get back into the management window.I was able to manage everything from my laptop about a month ago or so, but now I can't do anything.
View 9 Replies
View Related
Mar 11, 2012
I have set up my WAG320N with my E4200v1 successfully. The problem is that my laptops can't connect through WiFi with the E4200 router, but only with the WAG320N (wireless). Since it is the first time I set up a network alone I possible have made mistakes and that's why I can't connect to my router wirelessly. My desktop pc will successfully connect to both of my routers (wired)! My devices won't (DS,Laptops). I have WEP security in my WAG320N (because this is the only one my DS card can connect to) and in my E4200 I want to use WAP2 to connect my 2 laptops. I have made nothing more than setting them up and both of my evices are new.
It is for home use, both of my devices are updated to their latest firmware and the laptops won't identify the problem and will ask to restart the router. (I did many restarts both on my routers, PC, laptops)
View 1 Replies
View Related
Aug 31, 2012
I have an E3200 router. I had been experiencing connection problems with my desktop that was wired to the router, and in an attempt to resolve the issue reset the router to its factory defaults. Now, as before the reset, I can connect to my router just fine via Wi-Fi (I have several devices connected this way) but none of the computers that I attempt to connect via ethernet are able to establish a connection. I have tested multiple cables with multiple computers using multiple ports on the router, to no avail. When I view the Status --> Ports page on the router, I can see the ports in use that I am connected to, but that is the only sign of connection that I get.
View 1 Replies
View Related
Dec 21, 2011
I got the new E4200 router as I had issues with my old router. I was able to DMZ my console with the old router. But with my new router my xbox IP has changed and I want to know which numbers to use and how to DMZ my Xbox with Cisco Connect.
View 7 Replies
View Related
Apr 28, 2012
After I updated my E4200 V1 with the 1.0.04 update I am unable to connect my WET610N to it with 802.11N. I can connect fine with 802.11G. I tried the Site Survey method of pairing them as well as manual. When it fails it goes through the minute timeout of trying and then Link Status is disconnected. I have anything from phones to laptops connect to the E4200 with wireless N, its just the WET610N that doesnt want to pair.
Before I was running the following:
E4200 V1 1.0.03
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11N
After I was running:
E4200 V1 1.0.04
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11G
View 2 Replies
View Related
