Cannot Connect Via Ethernet But Can Connect Via Wireless
Jan 1, 2012
I have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
View 2 Replies
ADVERTISEMENT
Dec 28, 2012
A couple of months ago my battery in my laptop stopped holding a charge. Ever since then I've had a lot of problems. The first was the USB drive would not recognize my mouse and the red light on the mouse would not even come on. Now I have 20 different yellow triangles on all of my drivers in driver manager and I can troubleshoot and fix all of them except for RRnetcap miniport 8. And even if I troubleshoot ill just have the same problem when I turn it off and on again. I have a new PSU in the laptop so that can't be the problem. I'm connected to my wireless network but it says no Internet acess.
View 2 Replies
View Related
Sep 11, 2011
I have a Netgear wireless router and just set up my wireless network.The only problem is that when I remove the ethernet cable, I lose connection to the internet.My operating system is Vista.In the network connection icon, it shows that I am connected to an unidentified network.Also, on the globe icon it shows that I am connected to the network by local access only. Furthermore, I seem to be missing tabs under the wireless network connection properties section, such as advanced and sharing. I seem to be sending packets but not receiving any.I tried all the basics at this point, including rebooting and powering the modem and router down.
View 1 Replies
View Related
Oct 4, 2012
I've heard that AR5007 has troubles connecting to NetGear, but it's strange that I haven't had this problem until now. Maybe I've never needed to connect to a NetGear router before, but regardless.Wireless, it connects to the router but not to the internet. I've tried to follow what other threads have to say about this, but it's not really making sense or it's just not working.
View 1 Replies
View Related
Aug 15, 2012
My family just gave me their old Mac desktop, I wiped it clean and then tried to connect to the internet at my house and it tells me I have invalid password for the wireless. I also tried to connect it directly via ethernet cable that works and it will not connect. I want to connect my Mac directly with ethernet. All the other computers with internet work in my house so I know its not the internet. I will post below my computer specs and internet specs which I got from my other windows PC. I've tried manually putting in the ISP and DNS and nothing works.
[code]...
View 12 Replies
View Related
Nov 22, 2012
I got a new modem from the cable company Arris TG862G. This is a wireless modem and I had them set everything up on their end which is now after 2 hours with them on the phone working fine. The problem I'm having is somewhere in my computer is my guess and their guys didn't know which way was up so i gave up on them fixing my issue. So here I am. I have a custom built computer that is using a Gigabyte mobo and has been working fine with the on board Ethernet card before now. I used to have the desktop plugged into an Arris modem via a Belkin router and this set up worked fine. I also took the current modem and plugged it into the Belkin N600 router and then to my computer and to my complete bewilderment it worked fine. I wanted to get rid of the router so I could see if I could get faster download speeds (That initial issue being on speed tests I get 50mb/s and on actual downloads I would only get 5mb/s).
I got it to work (I have no idea how) for about 20 minuets. When I restarted the computer it stopped working. I am now back to square one which is the desktop not even recognizing that there is a cord plugged in. I know the cord is fine and the ports are fine as well that isn't the issue. My laptop connected just fine to the Ethernet cord with no issue. I have uninstalled the Belkin software to see if that was the issue and no change. Everything wireless works just fine, it is just this Ethernet connection that is FUBARed, and again ONLY with the desktop.I am running Windows 7 ultimate. I am about to QQ and just deal with the 5mb/s downlods because that's not terrible but I got greedy.I was messing with the Ethernet wire some and it started picking up the router but never tried to connect to the internet, I'm going to try other wires but I don't think that's the issue.
OK so another update ladies and gents: my desktop has been on for about 40 minuets now and it is connected to the modem. I have done nothing to it that would cause this and it just randomly happened. Short of never turning my computer off again which would be hell on my power bill what can I do to fix this problem? On speedtest.net I'm only getting 30.48 Mb/s and as I said earlier I should be getting around 50mb/s (which is what I get on on the wireless laptop). I just restarted it and it wouldn't connect to the modem again.
View 6 Replies
View Related
Apr 5, 2012
I built my first computer yesterday and everything went amazing. Unfortunately, I am having trouble simply connecting to the internet via wired, ethernet, cables. I can connect wirelessly but I need to connect wired as well. My IP when I am only using a wire starts as 169..I know this typically means there is a problem with my router, however, due to the fact that my laptop can use the wire router perfectly fine but my computer doesn't I am at a loss. I have downloaded the ethernet drivers but I don't know what to do.
View 2 Replies
View Related
Sep 30, 2011
I have hp g60 230us. The hard drive crashed so I installed a new one. Then I installed new vista ultimate 64 bit. I plugged into desktop's netgear router with ethernet and still wont connect to internet. When I go start/run/regedit in local services there is no wireless listing on bottom to enable. When I try to connect it says there is problem with Realtek Nic and only shows Broadband ppoev, something. T hought maybe I need drivers from hp to make everything work again but having trouble. Downloaded network to file then burned to dvd r on other laptop. Not sure how to load onto laptop in question (hpg60 230us). Also tried command prompt/ ipconfig.
View 1 Replies
View Related
Nov 27, 2012
I have just replaced a wbr-1310 with a dir-601. I can connect with an Ethernet cable, but not wireless. I have comcast cable with a Motorola surfboard modem. I was able to connect with the wbr-1310 with this setup.
View 9 Replies
View Related
Dec 8, 2012
How do I use an Actiontec 1000 modem (with wireless) and a TP-Link 4 port cable/DSL router and still have a wireless signal? When I connect the ethernet from the modem to the router, the router lights come on but the wireless signal goes down. Want 2 PC's wired (only one port on modem) and still want wirelss signal.
View 4 Replies
View Related
Aug 4, 2012
Last week I was using my laptop when suddenly it disconnected from the internet. I tried fixing it the next day, and even though there were full bars, it wouldn't connect to the network. I restarted my router multiple times and nothing. So, after a fit of anger and messing with different settings on my computer. For some reason, I was able to connect to the internet 2 or 3 times over the past week for about 10-15 minutes before it would disconnect me for the rest of the day.. So, I'm honestly so stumped. I thought maybe it might have just been my router, but I'm at my dad's house now and I'm not able to connect to his network, either. I might need to go ahead an order a new wireless adapter, but neither of us are that well with computers/networking. I'm hooked up via Ethernet cord which seems to be working fine, but my wireless is only able to read and not actually connect. (On occasion it will actually connect to the internet, but when it does I can't actually access the internet)I've tried uninstalling my wireless adapter, disabling/enabling it, a bunch of weird commands that I don't even know what they do (.. probably shouldn't have messed with those), stopping/restarting services, etc.
ipconfig /all with Ethernet unplugged
Host Name . . . . . . . . . . . . : Taylorrr-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 6 Replies
View Related
Nov 3, 2012
i can't connect to the wireless internet but can connect to internet through the ethernet cable. i am connected to network on wireless but no webpages work. other devices like iphone, and other laptos can connect to internet on wireless. i have tried turning the router on n off to restart it, and even resetting it back to factury settings but still doesn't connect wirelessly to my laptop.
have a netgear N150 Wireless Modem Router DGN1000 running microsoft windows 7 hp pavilion dm4 laptop
View 17 Replies
View Related
Jan 5, 2011
My computer doesn't want to connect to the internet via ethernet, however it will connect via wireless to the same network. Other computers on this network connect to the internet just fine.
View 3 Replies
View Related
Apr 14, 2013
Own a Dell Studio XPS 16 laptop. Intel wifi link 5100 agn network adapter, Router is ok because mobile phones connect through wifi
View 1 Replies
View Related
Feb 28, 2011
My dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
View 1 Replies
View Related
Dec 30, 2012
I have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
View 2 Replies
View Related
Mar 25, 2012
Purchased today 26th March 2012, used CD first as warned, followed procedures, will not connect to WAG 160N modem router. WAG160N has MAC restrictions but MAC of WRT160N added, both in wireless and as a computer. Still won´t connect, gets to 85% in wireless connect mode then fails, gets to stage 4 of router recognition and fails, saying check cables. Cables changed to know working ones, still no success. Tried pinging 192.168.1.1 direct from computer with no success, no access to router log-in page at all. WAG 160N has no problems.
View 2 Replies
View Related
Oct 25, 2012
I have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies
View Related
Nov 18, 2012
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.
Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....
When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.
View 1 Replies
View Related
Sep 23, 2012
My e4200 freezes and not connect in any interface not Ethernet not wireless, i connect reset in any way ( push the reset button, push the reset button an unplug the power.
View 9 Replies
View Related
Feb 15, 2012
im using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies
View Related
May 23, 2013
I bought my laptop over a year ago. The wireless is really slow. I read other posts about this issue and found out that the network adapter(n1030) on this laptop is faulty or something. So I tried connecting to the internet using the Ethernet port.
The port shows up on my device manager.Realtek PCIe FE Family Controller.I know there is nothing wrong with the modem or the Ethernet cable because internet on the other computers in my house work fine.
I would also like to add that when I bought the computer, it came with windows 7 but had the ubuntu sticker on it. People in Fiji only mostly use windows so I guess the shop I bought this from did the change to windows themselves.
View 1 Replies
View Related
Jan 28, 2011
Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?
View 1 Replies
View Related
Jan 30, 2011
Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
View 17 Replies
View Related
Dec 29, 2011
In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
View 2 Replies
View Related
Jan 22, 2013
I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies
View Related
Jun 6, 2011
I have just bought a TP-Link Wireless Access Point (TL-WA&01ND) and an ethernet switcher (TL-SF2005D).I have put the access point into client mode, allowing me to put it in my room and wirelessly connect to my router, allowing me to plug my PC in over ethernet and use the internet. However, after much fiddling with settings I cannot get it to work, as it continually searches for a network, and then fails to connect, despite the fact it is configured to use the network?I already have a similar setup with a netgear wireless G access point which works, and so I dont understand why the new box cannot do this when using what I believe to be the same settings.
Secondly I have an ethernet switch box which I bought to connect to the access point and switch the ethernet signal between my two PCs, my xbox and PC. This works fine with my primary PC (over my old access point) but when I try to connect my PC i get a DNS failure with auto IP settings and a gateway failure with manual settings, and other devices refuse to connect.
View 9 Replies
View Related
Oct 9, 2011
I have a thinkpad t23 ( yes I know a bit old but great for work purposes) and I haven't used it in a bit, over a year or so. I connect the Ethernet cable that I use on my other laptop and desk top to it but can't access the Internet. It shows when I am connected to the LAN and says running at 100mps.
View 4 Replies
View Related
Jul 1, 2012
I'll make this short and simple since it's problem a really easy fix.I have a pretty old pc. I have Windows 7 and XP installed in different partitions. Windows 7 doesn't run very well so i'm just going to use XP. On windows 7 it lets me connect to my router wired but on xp it doesn't connect.
View 7 Replies
View Related
Dec 31, 2012
I have tried for hours when i connect my computer to the router with an ethernet cord it will not connect. the command prompt doesn't recognized ipconfig or netsh.
View 1 Replies
View Related
Oct 26, 2012
I was using my dlink dir 524 but when i change my isp i cannot connect my desktop via ethernet while the internet works good on my laptop via wifi i had done all thing by turning off firewall but no luck i was using xp on my desktop and windows 7 on laptop.
View 4 Replies
View Related
Mar 12, 2013
I can connect to internet through my tablet. Also I had no problems last week it was working fine and yesterday I reset the router and it connected for awhile. I have 4 other pcs on the network and they are all working fine.
Not sure what else to try.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4010 Mb
Graphics Card: Intel(R) HD Graphics 3000, 1813 Mb
Hard Drives: C: Total - 476654 MB, Free - 71864 MB;
Motherboard: LENOVO, Emerald Lake
Antivirus: None
View 1 Replies
View Related
