Connect Wireless Telecom USB Modem To Buffalo WHR-G300N Router For Ethernet?
Oct 25, 2012
I have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies
ADVERTISEMENT
Oct 12, 2012
I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies
View Related
May 12, 2012
What is the default IP address of Buffalo Wi-Fi Router WHR-HP-G300N-AP? I just bought new one but I forgot that my PC CD-ROM is not anymore working. I'd like to set this up thru the default IP address.
View 1 Replies
View Related
Feb 28, 2012
I have the Air Station WHR-G300N. I just moved here from CA, I was on Verizon and now trying to use it on my girlfriend Cox system I can't get it to operate correctly.
Her PC system stopped having internet connection after about 2 weeks(running on the router) and going with Cox's reboot procedure of eliminating the router it can back up and seems to work fine as soon as I hook it back to the modem it stops.
I have unplugged all cables waited 30 seconds on both systems a couple of times. The lights are on the modem and the router.
View 1 Replies
View Related
Mar 25, 2012
Purchased today 26th March 2012, used CD first as warned, followed procedures, will not connect to WAG 160N modem router. WAG160N has MAC restrictions but MAC of WRT160N added, both in wireless and as a computer. Still won´t connect, gets to 85% in wireless connect mode then fails, gets to stage 4 of router recognition and fails, saying check cables. Cables changed to know working ones, still no success. Tried pinging 192.168.1.1 direct from computer with no success, no access to router log-in page at all. WAG 160N has no problems.
View 2 Replies
View Related
Nov 22, 2012
I got a new modem from the cable company Arris TG862G. This is a wireless modem and I had them set everything up on their end which is now after 2 hours with them on the phone working fine. The problem I'm having is somewhere in my computer is my guess and their guys didn't know which way was up so i gave up on them fixing my issue. So here I am. I have a custom built computer that is using a Gigabyte mobo and has been working fine with the on board Ethernet card before now. I used to have the desktop plugged into an Arris modem via a Belkin router and this set up worked fine. I also took the current modem and plugged it into the Belkin N600 router and then to my computer and to my complete bewilderment it worked fine. I wanted to get rid of the router so I could see if I could get faster download speeds (That initial issue being on speed tests I get 50mb/s and on actual downloads I would only get 5mb/s).
I got it to work (I have no idea how) for about 20 minuets. When I restarted the computer it stopped working. I am now back to square one which is the desktop not even recognizing that there is a cord plugged in. I know the cord is fine and the ports are fine as well that isn't the issue. My laptop connected just fine to the Ethernet cord with no issue. I have uninstalled the Belkin software to see if that was the issue and no change. Everything wireless works just fine, it is just this Ethernet connection that is FUBARed, and again ONLY with the desktop.I am running Windows 7 ultimate. I am about to QQ and just deal with the 5mb/s downlods because that's not terrible but I got greedy.I was messing with the Ethernet wire some and it started picking up the router but never tried to connect to the internet, I'm going to try other wires but I don't think that's the issue.
OK so another update ladies and gents: my desktop has been on for about 40 minuets now and it is connected to the modem. I have done nothing to it that would cause this and it just randomly happened. Short of never turning my computer off again which would be hell on my power bill what can I do to fix this problem? On speedtest.net I'm only getting 30.48 Mb/s and as I said earlier I should be getting around 50mb/s (which is what I get on on the wireless laptop). I just restarted it and it wouldn't connect to the modem again.
View 6 Replies
View Related
Apr 4, 2012
I seem to be having a problem connecting to the internet via ethernet cable that goes directly to a router. I am currently running off of a crappy wireless card. Ive checked my drivers with device manager and that yielded nothing. I recently reinstalled windows 7 and thats when the problem started. My motherboard is a Amd Athlon II x4 640 (Socket AM3) GA-M74GM-S2.
View 14 Replies
View Related
Aug 29, 2012
So saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.
Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)
So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.
View 14 Replies
View Related
Oct 9, 2012
I want to connect my satellite receiver to my modem through Ethernet cables. First connect the modem to Ethernet outlet using standard small Ethernet cable.connect Ethernet outlet A to outlet B using Ethernet cable inside the wall.connect outlet B to the receiver using standard small Ethernet cable.I want to know how I make the connection in outlet A and outlet B to make this work.
View 3 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Mar 6, 2013
We have a E3200 wireless router but our only connection is wireless. There is no Ethernet connection or cable modem. Presently I am unable to bring up the web page ie...10.100.x.x for entering the id/pw to login. Router is setup with default settings. Is there a setting that needs to be changed from the setup menu or this type of setup will not work with this router.
View 9 Replies
View Related
Mar 14, 2011
how do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies
View Related
Oct 13, 2011
I am using the WRT54G2 connected to a cable modem that requires a PPPoE login. I followed the Service Providers instructions and cloned the modems MAC address to the WRT54G and setup the PPPoE user id and password. I can then plug my PC into one of the Ethernet connections on the back of the WRT54G and everything works as expected. First I connect to the WRT54G2 and then I open a PPPoE connection in my network settings and it logs into the service provider and everything works as expected. But when I connect to the WRT5G2 wirelessly I connect to the AP fine. When I open the same PPPoE connection to the service provider it fails, the message says I have the wrong userid or password or that the protocol is not supported. Of course I know the userid and password is correct because it works when connected with Ethernet cable. I have tried disabling the security on the wireless network but that did not seem to work.The modem is a HomePNA HCNA Voice Endpoint.I am at the latest firmware 1.0.04.
View 7 Replies
View Related
Dec 2, 2011
I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
View 4 Replies
View Related
Jan 18, 2012
I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?
View 1 Replies
View Related
Nov 30, 2012
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
View 1 Replies
View Related
Dec 22, 2011
I'm using a new Buffalo router and wanting to use my old Buffalo router as repeater to extend the WiFi coverage at home.
View 1 Replies
View Related
May 26, 2011
I currently have a Buffalo WHR-HP-G54 running tomato firmware. I get roughly 4 or 5 bars around the entire house. Soon I will have to relocate the router to the basement.
Should I get a stronger 802.11N router or should I setup another buffalo router and use it as a repeater?
View 16 Replies
View Related
Feb 27, 2013
I have been trying to connect my webcam inside and outside my network. I had it working until I set up my buffalo router. I see my wireless webcam (1st floor) from my pc (2nd floor). I cannot connect through the internet outside of my network.
I have dyndns service which worked on my android and from pc at work. Now with the Buffalo router I cannot. It appears that DDNS is configured correctly on the Foscam and I have wireless configured on the router - it pics up the MAC address but only displays an * in SSID field that should be "Nursery".
If port forwarding is required, I have it set up, but not sure that is correct. I believe my Buffalo router is the N300 DD-WRT
View 3 Replies
View Related
Jun 20, 2011
My modem does not have a Ethernet plug in for my router. do I have to buy another modem for a 2nd computer?
View 1 Replies
View Related
Feb 22, 2013
I just purchased a Buffalo WZR-600DHP router and have been having a weird issue. When using the router on the shipped DD-WRT firmware I consistently get "The default gateway is not available" error and I have to reset my wireless adapter on my laptop. This issue doesn't occur on my hardwired desktop or interestingly enough when the Buffalo router was switched to the "user-friendly" firmware the issue didn't occur either. Both times the router was on the DD-WRT firmware I've had the default gateway issue.
View 1 Replies
View Related
Feb 10, 2011
My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.
I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.
View 6 Replies
View Related
Jul 28, 2012
My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.
View 1 Replies
View Related
Jun 5, 2011
trying to establish a connection on an ibm 3745 controller via two IBM 5822 modems to a cisco 2600 router using sdlc encapsulation secondary bridging data from the serial port to the E/Net port to run the 3270 client ???
View 19 Replies
View Related
Feb 12, 2013
I'm trying to change my username and password, but I don't know how. The manual is in Japanese, so I don't understand, what I need to do.
I have a wired router that seems to be on 192.168.1.1. When I installed the wireless router for the first time, I connected without cable, that may be the problem about the DHCP Server, but I don't know. Anyways, these IP don't work:
192.168.11.1
192.168.11.100
I don't get any access and therefore all my neighbors can use my connection right now. But the router itself works fine from the start.
View 3 Replies
View Related
Jun 10, 2012
So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
Sep 16, 2011
watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?
View 1 Replies
View Related
Aug 31, 2011
I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.
However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."
Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:
"404 Not Found The requested URL was not found"
I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.
The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).
I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".
Not exactly sure what to do right now. My worries:
1.) I'm not even exactly sure how to reset the darn router
2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.
Is there any way to access the friggin router settings page?
View 5 Replies
View Related
Feb 20, 2012
DCS 5230L possible to record on buffalo router buit in NAS?No option to choose, only can see SD card but Not my NAS.
View 2 Replies
View Related
Nov 28, 2012
Setup Buffalo WHR-HP-G54 as wireless access point?
View 1 Replies
View Related
Dec 30, 2012
I have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
View 2 Replies
View Related
Sep 11, 2011
When I attempt to connect my new laptop to it and enter the security key/password, it does not accept it.I was able to connect the computer I had before to the router.How can I connect my new computer?
View 9 Replies
View Related
