How To Set A Buffalo Router As Repeater
Dec 22, 2011I'm using a new Buffalo router and wanting to use my old Buffalo router as repeater to extend the WiFi coverage at home.
View 1 Replies
ADVERTISEMENT
Buffalo WHR-HP-G54 How To Get Stronger 802.11N Router
May 26, 2011 I currently have a Buffalo WHR-HP-G54 running tomato firmware. I get roughly 4 or 5 bars around the entire house. Soon I will have to relocate the router to the basement.
Should I get a stronger 802.11N router or should I setup another buffalo router and use it as a repeater?
Buffalo Router Connecting To Webcam
Feb 27, 2013I have been trying to connect my webcam inside and outside my network. I had it working until I set up my buffalo router. I see my wireless webcam (1st floor) from my pc (2nd floor). I cannot connect through the internet outside of my network.
I have dyndns service which worked on my android and from pc at work. Now with the Buffalo router I cannot. It appears that DDNS is configured correctly on the Foscam and I have wireless configured on the router - it pics up the MAC address but only displays an * in SSID field that should be "Nursery".
If port forwarding is required, I have it set up, but not sure that is correct. I believe my Buffalo router is the N300 DD-WRT
Default Gateway Is Not Available With Buffalo WZR-600DHP Router
Feb 22, 2013I just purchased a Buffalo WZR-600DHP router and have been having a weird issue. When using the router on the shipped DD-WRT firmware I consistently get "The default gateway is not available" error and I have to reset my wireless adapter on my laptop. This issue doesn't occur on my hardwired desktop or interestingly enough when the Buffalo router was switched to the "user-friendly" firmware the issue didn't occur either. Both times the router was on the DD-WRT firmware I've had the default gateway issue.
View 1 Replies View RelatedBuffalo WHR-G300N Router - Automatic DHCP To Manual
Oct 12, 2012I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies View RelatedBuffalo Router WZR-600DHP - Change Username And Password?
Feb 12, 2013I'm trying to change my username and password, but I don't know how. The manual is in Japanese, so I don't understand, what I need to do.
I have a wired router that seems to be on 192.168.1.1. When I installed the wireless router for the first time, I connected without cable, that may be the problem about the DHCP Server, but I don't know. Anyways, these IP don't work:
192.168.11.1
192.168.11.100
I don't get any access and therefore all my neighbors can use my connection right now. But the router itself works fine from the start.
Default Ip Address Of Buffalo Wifi Router Whr-hp-g300n-ap?
May 12, 2012What is the default IP address of Buffalo Wi-Fi Router WHR-HP-G300N-AP? I just bought new one but I forgot that my PC CD-ROM is not anymore working. I'd like to set this up thru the default IP address.
View 1 Replies View RelatedProtocols / Routing :: Buffalo WHR-G125 - Can't Access Router Settings (404 Error)
Aug 31, 2011I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.
However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."
Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:
"404 Not Found The requested URL was not found"
I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.
The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).
I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".
Not exactly sure what to do right now. My worries:
1.) I'm not even exactly sure how to reset the darn router
2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.
Is there any way to access the friggin router settings page?
Connect Wireless Telecom USB Modem To Buffalo WHR-G300N Router For Ethernet?
Oct 25, 2012I have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies View RelatedD-Link DCS Network Camera :: 5230L Possible To Record On Buffalo Router Built In NAS
Feb 20, 2012DCS 5230L possible to record on buffalo router buit in NAS?No option to choose, only can see SD card but Not my NAS.
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Using Buffalo Drive (formatted As FAT) As Media Server For ITunes
Nov 30, 2012For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
How To See Wifi Password In Buffalo Airstation
Jul 29, 2011I have set wifi password. but i can't see what the password is.
View 2 Replies View RelatedBuffalo Air Station WHR-G300N Default IP
Feb 28, 2012I have the Air Station WHR-G300N. I just moved here from CA, I was on Verizon and now trying to use it on my girlfriend Cox system I can't get it to operate correctly.
Her PC system stopped having internet connection after about 2 weeks(running on the router) and going with Cox's reboot procedure of eliminating the router it can back up and seems to work fine as soon as I hook it back to the modem it stops.
I have unplugged all cables waited 30 seconds on both systems a couple of times. The lights are on the modem and the router.
Setup Buffalo WHR-HP-G54 As Wireless Access Point?
Nov 28, 2012Setup Buffalo WHR-HP-G54 as wireless access point?
View 1 Replies View RelatedBuffalo Access Point Ssid Not Updating?
Jan 9, 2013i have one buffalo aoss accesspoint and i already create an ssid which is cfl. but now iwant to change my ssid as cflho. and i try to change it .but it is not update i save and reboot the device after changing the ssid
View 1 Replies View RelatedUnable To Share Connection With Buffalo AirStation?
Mar 9, 2013I just moved into a student apartment which has internet included. There is an RJ45 jack on the wall I am I able to use internet normally when using an Ethernet cable.However, I can't share the connection wirelessly. I have a Buffalo ADSL Modem/router which I would like to use to share the connection. The first time I plugged the cable into one of the 4 LAN slot, I was able to browse wirelessly but after a few minutes it stopped working and has not worked ever since. Could it be some kind of restriction on their part?Is there any special configuration settings to share my connection in such a way? Note that I don't use any DSL (phone) line here, I only have access to an Ethernet cable. When trying to browse Chrome gives me "Cannot load page because the DNS lookup failed"
View 11 Replies View RelatedRouters / Switches :: Buffalo Link Station 3t Not Responding Due To Firewall
Feb 12, 2013My buffalo link station 3t was giving me problems due to avg firewall blocking access to my drive. so switched it off to work . now that the drive is working but now when i click to access the drive the back ground on the desktop goes black on windows 7 its a acer laptop and the graphics are blurey.
View 1 Replies View RelatedBuffalo WZR-HP-G300NH - Changed Routers Getting Kicked Off Multiple Times
Sep 24, 2011I switched from a DLink DIR-655 to a Buffalo WZR-HP-G300NH recently and have been having problems keeping a wireless client bridge connected. The bridge in question is a Linksys WGA600N, and though it has been as solid as a rock with the DLink I find myself resetting it often to reconnect the device to my network under the Buffalo. The bridge has been flashed and reflashed to its latest FW and the router has been flashed with different versions of DD-WRT (Buffalo's versions and vanilla DD-WRT versions; currently on vanilla DD-WRT v24-sp2 build 14896), yet I'm still experiencing the same problem. Fuddling around with the some of the wireless settings like the wireless channels on the router seems to keep the bridge connected a little longer than usual, however once it disconnects the frequency of drops goes up again. Other wireless clients on my network don't seem to have this problem with exception to another bridge (WHR-HP-GN) that I returned due to becoming catatonic to both wired and wireless connections.
View 4 Replies View RelatedDell :: Not Connecting To Buffalo WHR G-125 With Latitude E5420 / Intel Centrino Advanced N 6205
Mar 30, 2013I just purchased a used Latitude E5420. It looked like the seller did a fresh reinstall of Windows just before selling it to me. The non-internet applications are working fine, but it's not connecting to my home wireless router. I have a Buffalo WHR G-125. I tried pretty much every type of security type, but nothing worked, so I eventually disabled security and set up MAC filtering, after which I put in the MAC address for the laptop. That still didn't solve the problem.
It does connect to my neighbor's unsecured linksys network. Both the neighbor's network and mine are 802.11g
I went to Intel's website and installed the latest drivers for the network card, but that didn't work. I'm using the latest firmware on the router already.
Here are the specs for the laptop
Win 7 Professional 64-bit
Intel Core i5 2520M @ 2.50 Ghz
16 GB RAM
DIR-601 Dlink Router - To Use It As Repeater
Mar 7, 2012I have already successfully upgraded the firmware to DD-WRT with no problems.What I want to do is have the D-Link DIR-601 Router set as a Repeater Bridge because I am trying to expand my wireless signal to dead spots in the house.I have NO SECURITY enabled on my NetGear Router and I am still unable to successully setup the D-link DIR-601 Router as a Repeater Bridge.
View 2 Replies View RelatedSetting Up A Repeater Router?
Sep 26, 2011I have a very large house with many people using wireless laptops. i used to have verizon internet and I purchased a wlan 11g mini router from radio lads. After it was set up it worked great. I have just switched to comcast internet (my first mistake) and I can't get the mini router to work.
View 1 Replies View RelatedUsing Second Router As A Wired Repeater?
Feb 17, 2013[URL] It works wirelessly, but I'm trying to get it to work physically. The end goal is to have my old PC as a server on the other side of the house, connected to nothing but the second router and a power cord. I know I could do this easily just by running an Ethernet cord across the house and skip using the second router altogether, but I'd really rather not.
View 2 Replies View RelatedHow To Connect Repeater To Router
Sep 9, 2011How to connect repeator to router
View 1 Replies View RelatedLinksys Wireless Router :: Configure E2500 As Router And WAP54G As Repeater?
Dec 28, 2012Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.
View 2 Replies View RelatedUse My D-link Router As A Repeater For Wifi?
Apr 8, 2013I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies View RelatedUsing DLink DIR 615 Wireless Router As Repeater?
Nov 6, 2011I recently bought a new D-Link DIR 615 but I dont get adequate range in the rooms farthest away from the router. I have an old D-Link DIR 634M router which I'm told can be used as a wireless repeater. I went through several articles that describe connecting the two routers through a LAN cable. However is there a way to do the same without using a cable of any sorts?
View 1 Replies View RelatedUse Netgear WNR2000 Router As Repeater?
Jun 29, 2012I'm trying to use a Netgear WNR2000 router as a repeater, I have a Netgear WGR614v9 as the main router in my house. I have followed online guides as closely as possible but am still having troubles. My main router is working fine, everything can connect to it and gain access to internet despite having to change the security to WEP to allow for the repeater function to work. Now I am having troubles getting the repeater (WNR2000) to connect to my main router. The ip address of the repeater is listed in the connected devices of the main router and everything is managing to 'find' the repeater just fine but when I connect and put in the WEP key there is no internet connection. I read that a static ip address is needed or something like that but I am completely baffled
View 1 Replies View RelatedRun Server From Repeater / Bridge Router?
Feb 3, 2013Just recently I got a small block of Static IPs from my ISP with the intent of setting up small personal servers like for mail, cloud storage etc... using a couple of the Arm based Raspberry Pi. i have is i can i run my Pi servers off my router, which is bridged to the main (ISP) router, or would i have to attach them to the main to take advantage of the static IPs/set them up?
View 1 Replies View RelatedLinksys Wrt54g V2 Router To Repeater?
Jul 27, 2011I have a linksys wrt54g v2 router I want to convert to a repeater. I looked up instructions buteveryone says after all is done I have to connect my main router to the new configured rrepeater. Is there.a way I can do this without connectingthem together via cable. My house is seperate from the main house and running cable is not logical I have signal at my house just need better signal
View 1 Replies View RelatedAsus RT-N12 Router Turned Repeater?
Apr 25, 2011I have the Asus RT-N12 and at my old apartment it was set as my router. I now have moved and have roommates who already have a router in use. I want to use the repeater function of this router but when I follow the instructions given by asus I hit a wall. They say to switch to repeater mode, plug it into a client on the network, and then launch quick installation setup by opening an internet browser. Unfortunately when I use a wired connection to the old router I cannot even navigate the internet because my computer is interpreting it as being hard wired to the router for my old network. is there a way to factory reset the monitor?
View 3 Replies View RelatedUsing Netgear Wndr3300 Router As Repeater
Sep 27, 2011Can I use router as a repeater for a linksys router(wrt54g)
View 1 Replies View RelatedAttach A Repeater To Router Via Cable?
Dec 25, 2012What does one attach a repeater to the router via a cable?
View 2 Replies View RelatedConvert A D-Link Router Into A Repeater?
Dec 7, 2012How do you convert a D-Link router into a repeater?
View 1 Replies View Related
