Buffalo WHR-G300N Router - Automatic DHCP To Manual
Oct 12, 2012
I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies
ADVERTISEMENT
May 12, 2012
What is the default IP address of Buffalo Wi-Fi Router WHR-HP-G300N-AP? I just bought new one but I forgot that my PC CD-ROM is not anymore working. I'd like to set this up thru the default IP address.
View 1 Replies
View Related
Oct 25, 2012
I have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies
View Related
Feb 28, 2012
I have the Air Station WHR-G300N. I just moved here from CA, I was on Verizon and now trying to use it on my girlfriend Cox system I can't get it to operate correctly.
Her PC system stopped having internet connection after about 2 weeks(running on the router) and going with Cox's reboot procedure of eliminating the router it can back up and seems to work fine as soon as I hook it back to the modem it stops.
I have unplugged all cables waited 30 seconds on both systems a couple of times. The lights are on the modem and the router.
View 1 Replies
View Related
May 2, 2011
what I did do was manually set my IP address for my laptop for my wireless. But I no longer needed to do that so I set it back to Automatic. But every minute or so my IP is changing back to 192.168.0.12 which I did change it to, although it is on Automatic. This is my guess to as what it is doing as I have no connection to the internet after about a minute. ipconfig also displays my IP Address as being 192.168.0.12 as well.What I have to do is disable and then reenable my wireless to get it working again.
View 14 Replies
View Related
Dec 9, 2012
I am trying to determine the best way to setup my E4200 V2 so that it is “uplinked” correctly to a Comcast Dory Modem/router. Currently we have the E4200 V2 router plugged into the Comcast Dory Modem/Router using a CAT6 cable from one of the Ethernet ports on the Comcast device to the WAN port on the E4200. The E4200 is set to “Automatic Configuration - DHCP.”
We are trying to do two things. First better WIFI in the center of the house and for a TV located next to the Comcast device, and second, have all devices in this house see and access all other devices including the Samsung SmartTV, my son’s two systems upstairs, the 3 systems in the room with the E4200, and the one network printer. In the room with the E4200 we have 3 computers and one network printer. 3 of those 4 devices support WIFI so we don’t have to use all 4 Ethernet ports on the E4200.
I see others talking about running the CAT6 cable to an Ethernet port on the E4200 instead of the WAN port and setting it to “Bridge Mode.” Right now the system appears to be working fine although we are sometimes experiencing brief dropped connections with the devices hardwired into the E4200.
Should I be running the E4200 in “Bridge” mode or “Automatic DHCP” mode and which port on E4200 should the CAT6 from Comcast be plugged into?
View 9 Replies
View Related
Mar 26, 2013
E4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
View 6 Replies
View Related
Sep 7, 2011
I'm a heavy PC Gamer, I play games such as World of Warcraft, Borderlands, Call of Duty, Steam Games, I also know my way around fixing internet issues, But this one just seems to have gotten me off guard, Recently, 1-2 days ago, I was browsing the internet like a normal day, and It was late, so I decided to go to sleep, Turned my computer off, Woke up the next morning, Turned it on, It then shows that I kept getting kicked off the LAN for some reason, It was like this[CODE]
View 2 Replies
View Related
Nov 27, 2011
WE HAVE cISCO 2960 SWITCHES. this switch acts as a dhcp server for the hosts connected to it. Provided mac based binding to the hosts, with enabled dhcp snooping and IP source guard per interface.' I have a problem with single host couldnt get an ip from dhcp as he binded based on mac: manualip. Here is my config: We have a VLAN99, 70 hosts connected should get an ip based on mac
switch(2960<config>interface vlan99
# ip address 10.10.14.2 255.255.255.0(code)
The above host amit (10.10.14.31 swhould get this ip bindded with mac) but hez not getting manual ip i.e 10.10.14.31, but if an ip excluded from the dhcp free, he can get that ip i.e automatic ip . every other host are getting the ips as binded in the pool manual ip. Checked with
**sh mac-address table dynamic vlan 99 ()
**clear ip dhcp binding * or 10.10.14.31
** clear ip dhcp snooping binding
*** clear ip dhcp conflict *
Tried to change pool names. All these troubleshoot couldn't make me success in providing amit an manual ip.
View 10 Replies
View Related
Jan 8, 2013
We have been using a dhcp and tftp server to automatically configure branch WAN routers such as 1751's and 1841's for years but, have recently purchased a 1921 and 1941 as possible next generation replacements. The problem is when the 1900 series power up instead of getting a dhcp address directions to the tftp server it boots up and asks for the user name to be immediately changed or you will be "locked out". Any workaround to this so that I can again go back to download my common configuration? Or any other way of automatically configuring the newer version ios? Doing extra steps for 500 WAN branch routers is time consuming. Doing configurations without automation for that many is moving in the wrong direction.
View 1 Replies
View Related
Dec 22, 2011
I'm using a new Buffalo router and wanting to use my old Buffalo router as repeater to extend the WiFi coverage at home.
View 1 Replies
View Related
May 26, 2011
I currently have a Buffalo WHR-HP-G54 running tomato firmware. I get roughly 4 or 5 bars around the entire house. Soon I will have to relocate the router to the basement.
Should I get a stronger 802.11N router or should I setup another buffalo router and use it as a repeater?
View 16 Replies
View Related
Feb 27, 2013
I have been trying to connect my webcam inside and outside my network. I had it working until I set up my buffalo router. I see my wireless webcam (1st floor) from my pc (2nd floor). I cannot connect through the internet outside of my network.
I have dyndns service which worked on my android and from pc at work. Now with the Buffalo router I cannot. It appears that DDNS is configured correctly on the Foscam and I have wireless configured on the router - it pics up the MAC address but only displays an * in SSID field that should be "Nursery".
If port forwarding is required, I have it set up, but not sure that is correct. I believe my Buffalo router is the N300 DD-WRT
View 3 Replies
View Related
Feb 22, 2013
I just purchased a Buffalo WZR-600DHP router and have been having a weird issue. When using the router on the shipped DD-WRT firmware I consistently get "The default gateway is not available" error and I have to reset my wireless adapter on my laptop. This issue doesn't occur on my hardwired desktop or interestingly enough when the Buffalo router was switched to the "user-friendly" firmware the issue didn't occur either. Both times the router was on the DD-WRT firmware I've had the default gateway issue.
View 1 Replies
View Related
Feb 12, 2013
I'm trying to change my username and password, but I don't know how. The manual is in Japanese, so I don't understand, what I need to do.
I have a wired router that seems to be on 192.168.1.1. When I installed the wireless router for the first time, I connected without cable, that may be the problem about the DHCP Server, but I don't know. Anyways, these IP don't work:
192.168.11.1
192.168.11.100
I don't get any access and therefore all my neighbors can use my connection right now. But the router itself works fine from the start.
View 3 Replies
View Related
Aug 31, 2011
I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.
However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."
Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:
"404 Not Found The requested URL was not found"
I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.
The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).
I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".
Not exactly sure what to do right now. My worries:
1.) I'm not even exactly sure how to reset the darn router
2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.
Is there any way to access the friggin router settings page?
View 5 Replies
View Related
Feb 20, 2012
DCS 5230L possible to record on buffalo router buit in NAS?No option to choose, only can see SD card but Not my NAS.
View 2 Replies
View Related
Nov 30, 2012
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
View 1 Replies
View Related
Feb 21, 2011
I want to know if its possible to create a Vpn connection ON a router so my router automatically connects through the vpn settings.As a result all the appliances that connect to the router would be connected to the vpn without having to change any settings. Is this possible ?
View 2 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
View 4 Replies
View Related
Oct 12, 2011
I've been having this problem with my Belkin router since day 1 when i got it.( not new, got from buddy's place) It's Belkin HI Speed Wifi G router, and what's really frustrating is, everytime i connect to it, I need to manually change the DNS address and switch between 4.2.2.2 & 4.2.2.4 in order to get internet access! Sometimes it even cuts off the internet during a session, without me even disconnecting from the wifi network, where I would again need to switch back and forth to the 2 or 4 ending!
View 3 Replies
View Related
Dec 24, 2012
Where do I find a manual for the LinksysE1000?
View 1 Replies
View Related
Aug 2, 2011
I have a WRT54GS wireless router. I can successfully set up the router with my DSL modem for PPPoE. Here's my problem. The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically. I DON'T want it to do that. Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?
View 1 Replies
View Related
Apr 18, 2010
I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?
View 4 Replies
View Related
Jan 27, 2013
I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies
View Related
Dec 9, 2011
I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies
View Related
Nov 19, 2012
I am curious as what the packet size should be set . is the bigger size == lower speed smaller == faster or just leave automatic setting for packet size?
View 4 Replies
View Related
Apr 14, 2012
I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
View 8 Replies
View Related
Jul 9, 2012
Do you know when will be possible to manual configure ipv6 settings? I have all parameters from my ISP but the settings on the router are only automatic and 6rd. Is it possible to enable this in future firmwares?
View 1 Replies
View Related
Aug 4, 2012
I have had several Linksys and Cisco routers in the past, and I'm a network engineer. My E3000 died after only 18 months so I had to run down and buy a new router, thus the EA4500.
I use the manual way to configure all my network gear. Nothing on my network changed, except the router replacement.If I leave the router default address at the 192 range, DHCP will issue a IP address. However, I do not use that range and after cdhanging the range, setting my start IP address, etc, I save everything and even tried rebooting the router to no avail. The router will not issue a DHCP addrss if you change the default range.
I can manually configure my clients with a static IP and all is good, no issues at all. I just can't get DHCP to work. My E3000 was configured exactly the same way and worked just fine, well up until two days ago.I have tried upgrading to the latest router firmware, so I'm not on 2.0.37 and I did set the router back to Factory Defaults, rebooted, then configured it, and still no DCHP.
View 7 Replies
View Related
Apr 27, 2012
The device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies
View Related
Jun 6, 2012
I have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies
View Related
Mar 21, 2012
do external hard disks automatically spin down after a period with no access/use when connected with the USB port of the WRT160NL?
View 1 Replies
View Related
