I want to know if its possible to create a Vpn connection ON a router so my router automatically connects through the vpn settings.As a result all the appliances that connect to the router would be connected to the vpn without having to change any settings. Is this possible ?
View 2 RepliesMy laptop is an Inspiron N5010 running the standard Windows 7 64bit. When returning from sleep/hibernate, the internet wont connect automatically. And there is a little red cross over the Internet access icon in the bottom left.After I click to connect to the network it still cannot make the connection. And a yellow '!'' appears over the icon. After I click 'Troubleshoot problems" it will make connection though it can take a minute till its up.
I have checked the option to automatically connect to the network in range. And this used to work fine, but somehow it doesnt work correctly anymore.I have the latest bios and network drivers already.
I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies View RelatedI have a WRT54GS wireless router. I can successfully set up the router with my DSL modem for PPPoE. Here's my problem. The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically. I DON'T want it to do that. Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?
View 1 Replies View RelatedI am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?
View 4 Replies View RelatedI have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies View RelatedI have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies View RelatedI am curious as what the packet size should be set . is the bigger size == lower speed smaller == faster or just leave automatic setting for packet size?
View 4 Replies View Relateddo external hard disks automatically spin down after a period with no access/use when connected with the USB port of the WRT160NL?
View 1 Replies View RelatedI am trying to determine the best way to setup my E4200 V2 so that it is “uplinked” correctly to a Comcast Dory Modem/router. Currently we have the E4200 V2 router plugged into the Comcast Dory Modem/Router using a CAT6 cable from one of the Ethernet ports on the Comcast device to the WAN port on the E4200. The E4200 is set to “Automatic Configuration - DHCP.”
We are trying to do two things. First better WIFI in the center of the house and for a TV located next to the Comcast device, and second, have all devices in this house see and access all other devices including the Samsung SmartTV, my son’s two systems upstairs, the 3 systems in the room with the E4200, and the one network printer. In the room with the E4200 we have 3 computers and one network printer. 3 of those 4 devices support WIFI so we don’t have to use all 4 Ethernet ports on the E4200.
I see others talking about running the CAT6 cable to an Ethernet port on the E4200 instead of the WAN port and setting it to “Bridge Mode.” Right now the system appears to be working fine although we are sometimes experiencing brief dropped connections with the devices hardwired into the E4200.
Should I be running the E4200 in “Bridge” mode or “Automatic DHCP” mode and which port on E4200 should the CAT6 from Comcast be plugged into?
what I did do was manually set my IP address for my laptop for my wireless. But I no longer needed to do that so I set it back to Automatic. But every minute or so my IP is changing back to 192.168.0.12 which I did change it to, although it is on Automatic. This is my guess to as what it is doing as I have no connection to the internet after about a minute. ipconfig also displays my IP Address as being 192.168.0.12 as well.What I have to do is disable and then reenable my wireless to get it working again.
View 14 Replies View Relatedi wanna ask a question regarding automatic startup on lms 4.1, i have installed my LMS 4.1 on esxi 4.x . but recently my server sometimes down because the electricity problem. and when my friend push the power button to start the server, the LMS is not automatically active. is it possible to make it automatically active soon after my server power up ?
View 3 Replies View RelatedI am evaluation the new Anyconnect 3.0 client against Microsoft DA. Everything looks good but I am wondering; Is it possible to have Anyconnect auto connect (based on TND) before user logon without the user activating the client manually?
View 4 Replies View Relatedim working in company that develop high speed networking equimpnet(Mellanox)we develop 4056GB network cards and switches.we have developer network on HP pro curve switchs, the engineering make tets on servers with the high speed network cards and sometimes the test "go out" from the 4056GB network cards and switches and "boombing" the regular network of 1G in hp swiches.i meen every server are connecting with RJ-45 cable for access to the server and the real work is on th Mellanox switches and network cards but sometimes the test "run away" to the ethernet network and 40G traffic are killing the network.function in HP switches that recognize over booking traffic and automatic disable the bombed port?now we have spening tree and brodcaste limit on every switch but its not enough, the big traffic kill the network until we disable the problematic port and igonre the bombing server.we have hp procurve 5610 layer3 switch and pro curve 2510 switches.
View 4 Replies View RelatedI'm a heavy PC Gamer, I play games such as World of Warcraft, Borderlands, Call of Duty, Steam Games, I also know my way around fixing internet issues, But this one just seems to have gotten me off guard, Recently, 1-2 days ago, I was browsing the internet like a normal day, and It was late, so I decided to go to sleep, Turned my computer off, Woke up the next morning, Turned it on, It then shows that I kept getting kicked off the LAN for some reason, It was like this[CODE]
View 2 Replies View RelatedIs there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies View RelatedI know that configuration in 8.2.x and 8.4.x is different in terms of NAT and object groups.
I just want to know is it possible to do a direct upgrade from 8.2.3 to 8.4.x ?Secondly, will ASA automatically convert all the configuration from 8.2 to 8.4 format during the reboot after the upgrade?
I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
View 3 Replies View RelatedFirst time on this forum: I have a client running a Windows 2008 server, Windows 7 OS. We set the default printer as the server file cabinet printer, however, between logging off in the evening and back on in the morning the default printer switches to his local printer
View 2 Replies View RelatedIs there any solution for automatic switching between wired and wireless network connection?
In my work we have two option for connection to network. Wired for working but with blocked pages like youtube and other streaming media. And wireless for visitors which haven't blocked any pages but I can't do my work on it. Can I by connected to both and some utility will doing switching between them? I want to use streaming and be connected to wired network which has blocked streaming.
It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies View Relatedin the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
I'm having an issue with McAfee Antivirus remediation. I'm using Cisco NAC 4.8.2 and it seems that automatic remediation is not working.Is there a webpage where we can check which AV can do automatic remediation?
View 1 Replies View RelatedI would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
we have a AP cisco AIR-AP1131G-E-K9 Version 12.4(10b)JA, and we would like to do automatic backup of CLI configuration to one server, and we dont know how to do.
For example: On router and switch we use this kind of configuration to do automatic backup: [code]
I try to let Cisco ASA automatic select a tunnel group for users, after user input username and password. I try to do this without user selection a connection profile on login page. Authentication on ASA<>ACS 5.3<>MS AD. How i can will do this? Radius attribute class=group_policy don't work.
View 1 Replies View RelatedHow often does ACS 4.1 purge dynamic users from it's user group after inactivity?
We're trying to disable access to certain resources via a NAR, and finding that some users are not in the ACS dynamic user database, despite that, at one point in the past, they have used it.
Am I correct in assuming that a user that has never authenticated via an ACS-controlled resource would not be in the database?
I have WLC 2125 on version 6.0.182.0 and AP's on version 12.4(21a)JA.I also have a load more AP's (newones) 1041's with IOS version 15.2.
So i have to upgrade my WLC because the newones are not compatable with the old WLC version.What will happen to the old AP's ?I was told they will automatically update the IOS version.These AP's (oldones) are not on site, they are in a differnet LAN.
I have two RV180W's which are excellent units in almost all respects. The one really noticeable problem is that when I have a power outage (which I have quite a lot in rural France) my RV180W does not automatically restart when the power is restored. Is it not possible to fix this in the next firmware upgrade, or have I missed something in the router menu/setup which I should have set.....?
View 1 Replies View RelatedIs it possible to automatically shutdown the OUTSIDE interface on a Cisco ASA 5520 in case of intrusion?.
In my opinion if there is an attempt of intrusion, just the device would stop it. If it cannot detect it, how can the device recognize the event and so shutdown the interface?. Am I correct?
I have a simple wireless network in my home run through a Linksys WRT54G Router connected to a cable modem. I set up a Western Digital 1TB external hard drive as a network drive through use of a Seagate FreeAgent DockStar. (The HD connects to the DockStar by a USB cable, which in turn connects to the router by an Ethernet cable.)
The hard drive functions as a network drive and I've configured Windows 7 Home Premium on my laptop computer to recognize it at start-up so it can essentially be used read and written to like a local drive.
Is there a way to make Windows 7, either by built-in software or third party software, automatically backup certain files or directories when changes are detected?
For example, I have a folder on my internal HD where I organize the vast amount of photos that I take so that I can easily find them through the operating system instead of having to go through a photo manager. In my ideal situation, something would be monitoring to see if I have made changes in only that folder (either adding new folders, deleting photos, or modifying files) and simultaneously make the changes to the network hard drive. Effectively, I want something to mirror the changes on my local hard drive on the fly and update the network hard drive accordingly. I do this all manually at the moment and it sucks up a lot of time that could probably be done automatically.
How to schedule automatic Xlate sessions cleaning in ASA5550. I want to clear few global nat sessions manually every week.Is there any way to automate that?
View 1 Replies View RelatedI had something strange happen to my WRVS440N router yesterday. Our network had crashed for some reason. So I attempted to log into the device to see what was wrong and I was surprised to discover that all of the settings including user name and password had reverted back to factory default.
1. What are all of the possible scenarios that would cause this to happen?
2.Would disconnecting power in the middle of a boot up sequence cause the router to revert to factory settings?