Internet Works Only With Fixed DNS Server - How To Change To Automatic
Jul 19, 2012
It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
I'm a heavy PC Gamer, I play games such as World of Warcraft, Borderlands, Call of Duty, Steam Games, I also know my way around fixing internet issues, But this one just seems to have gotten me off guard, Recently, 1-2 days ago, I was browsing the internet like a normal day, and It was late, so I decided to go to sleep, Turned my computer off, Woke up the next morning, Turned it on, It then shows that I kept getting kicked off the LAN for some reason, It was like this[CODE]
I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
My laptop is an Inspiron N5010 running the standard Windows 7 64bit. When returning from sleep/hibernate, the internet wont connect automatically. And there is a little red cross over the Internet access icon in the bottom left.After I click to connect to the network it still cannot make the connection. And a yellow '!'' appears over the icon. After I click 'Troubleshoot problems" it will make connection though it can take a minute till its up.
I have checked the option to automatically connect to the network in range. And this used to work fine, but somehow it doesnt work correctly anymore.I have the latest bios and network drivers already.
how much RAM is requied on server hosting CiscoWorks. Our CiscoWorks is running like snail. We have 3200 logical devices configured on it. Specially browing different pages of CiscoWorks is very very slow.
how big hard drive will be enough for CiscoWorks with below applications installaed and configured with 3200 devices.. Currently we have 65GB Harddrive and its 85% full.
Server Platform: Windows 2003 server 32-bit Server RAM: 4GB Hard Drive: 63GB-CiscoWorks is installed on this Harddrive. Another Partition of Harddrive is 130GB and its 100% free.
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
I want to make a small LAN, not connected to the internet. I open control panel/networking and find my Ethernet adapter. I unchecked IPv6 and click on IPv4 and select "Properties". I gave a fixed IP address of 192.168.1.1 butI can't ping 192.168.1.1
And a program I wrote can't access a MySql database on that address. I am using Xampp, the program can access the database if its connect string says localhost, not 192.168.1.1 Also, I can access through PhpMyAdmin and invoking MySql from a Dos box - so, MySql seems to be ok. Wondering why I can't ping, I run IPCONFIG and my Ethernet adapter's address is the old one, not the new fixed one that I assigned.
[UPDATE] I haven't attached a router yet, it's a stand-alone PC. Thanks for pointing out that the router, when added, will probably be 192.168.1.1 so I should probably make my PC 192.168.1.2. but my point here is that I can't ping what I thought I set as my static IP and, indeed, it does not show up when I run IPCONFIG - I get the previous value.
I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
I have configured the NCS 1.1.1.24 and its running fine, but i used the IP address 10.18.20.7(it was the WCS server), but now I want to use 10.18. 20. 8 (NCS Server) ip address.
so what should i do to change the ip address: I know only 1 thing that is, change the ip of the interface gig 0 .My main task is to run WCS and NCS parallal.
I have a fixed external ip address.I have port forwarding setup for accessing a NAS inside my LAN, lets say port 12345.Now when I use my laptop outside my own LAN, e.g. 99.99.99.99:12345 resolves nicely to my NAS. But when I use the same 99.99.99.99:12345 inside my LAN, it does not resolve. Instead, it gives me a 'server takes too long to answer' error
I have also setup a virtual host to an ip cam inside my network. That one resolves just fine. I tried enabling remote management on the DIR-655 and also that works fine using 99.99.99.99:8888.When I replace the external ip address with the internal ip address of my NAS, thus bypassing port forwarding, it obviously also works ok.
Why the forwarded ports are not accessible when I use my own external fixed IP address? Does the DIR-655 treat it different than other external IP addresses?
I have a srp521 and want to set it up as a vpn server so I can connect back from outside.On the router under the vpn tab I only have
Site to site IPSec VPN IKE Policy IPSecPolicy GRETunnel VPN Passthrough
Page 191 of the srp500 manual says Click VPN > Cisco VPN Server > Group. The Group window opens The manual also says only the serer or Site to site will work at one time, so where do I make the change to bring up the vpn server option?
I live in an area where there are lots of wireless modems and since most broadcast on the default frequencies, here is often interference. I'd like to set my AC900 to broadcast on a fixed channel that is not often used, e.g. 2 or 3 or 8.
I am looking upgrade my ASR routers to a newer code. I am running asr1000rp1-advipservicesk9.03.03.01.S.151-2.S1.bin now. Would like input on what a good stable version is. I am not bleeding edge so the latest version I won't trust.
My pc will not pick up the internet, my iPad does through my wifi. I called my provider and they said my connection is fine, they mentioned not using a USB cable but when I take it out my wifi won't work on my iPad. My pc keeps saying not connected to the internet. I have a modem and a router, do I only need 1 maybe?
My computer is connected via ethernet cable. the internet works fine. But it says that I am Not Connected and that there are no connections available.I'm not sure what specs you guys would need to look at tobut just post telling me what
we are running LMS 4.0 on Windows Server 2008, and just changed the hostname of the server, as the former on reflected it being a test system. However, after rebooting the server (as required by windows), the LMS application did not launch.After rolling the windows server back to the old hostname, the LMS started working again.Why is this? Isnt it possible to change the server hostname after the LMS has been set up for the first time?
I have two 5500-controllers and one WCS-server. Now I will have to move the WCS-server to another subnet and change the IP, but it will keep the name.Will that effect the connection between the controllers and the WCS?Do I have the change anything in the configuration on the controllers or the WCS-server?
I have a Belkin Play N600 HD router. Does it have the capability to let me assign fixed IP addresses to devices like printers, NAS drives, and cameras so I know where they are?
I need to create several VLans on my switch.After reading the admin guide pdf, i still don't understand how to create any simple VLan.some tutorial or steps (with IE or Mozilla browser) how to create and use VLan, and to connect one VLan to another.For example,i need to create 3 VLans.
First Vlan consist of 5 ports (Vlan Name = Red) Second Vlan consist of 15 ports (Vlan Name = Green) Last Vlan consist of the rest of the ports (VLan Name = White)
I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
When I read Nexus 5K install guide , I found the follow :The Cisco Nexus 5596UP switch has the following features: # •48 fixed 1- and 10-Gigabit Ethernet server connection ports on the back of the switch AND The 48 fixed ports support 8-, 4-, 2-, or 1-Gbps Fibre Channel transceivers and 1- or 10-Gigabit Ethernet transceivers. Does these is a conflict ?The 48 fixed port on this switch support only 1- and 10-Gigabit Ethernet or 8-, 4-, 2-, or 1-Gbps Fibre Channel and 1- or 10-Gigabit simultaneously ？
I have an ADSL connection and have configured the PPPoE subinterface on WAN1 (ADSL) this connection has a static IP, and I know that the ISP gives that to me through DHCP however I have 4 or 5 additional IP addresses also provided to me on that same link, and they are not given to me via DHCP.
How do I configure this router to have multiple fixed IP addresses on a PPPoE interface?
I also need to port forward some ports for each of the IP's but I assume this will be easy after i have the IP addresses setup.
I have a HP G60-530US and i use Mozilla Firefox. My computer had froze up and i had to restart it. My wifi is working but it keeps sending me firefox cant find the server at... message. It said that the firewall or proxy could be doing it but i cant find a problem with it. My computer had just updated so i dont know if that could be the issue. My other computer is working just fine so i know its not the router. My computer has done with before but i cant remember how i fix it and if im not mistaken my computer had updated when it happen the last time, but im not 100% sure.
