Cisco :: LMS 4.1 - Change Server Name In Report Emails
Feb 13, 2012Currently, my report links are displaying the server as "lms" instead of "lms.domain.net". Where do I change this within LMS?
View 2 RepliesCurrently, my report links are displaying the server as "lms" instead of "lms.domain.net". Where do I change this within LMS?
View 2 RepliesWe have a new 4507R-E Switch which RME keeps reporting as "CONFIG_CHANGE" each evening. When you click to see the change, the only thing that has changes is the "ntp clock-period".
However, we have configured "ntp clock-period" as an exclude command in RME Config Managment.
I need to understand why change audit report reports an unused username Name of the user who performed the change. This is the name entered when the user logged in. It can be the name under which the LMS application is running, or the name using which the change was performed on the device. #The User Name field may not always reflect the user name. The User Name is reflected only when: A config change was performed using LMS. #A config change was performed outside of LMS, but the network has username-based AAA security model, wherein authentication is performed by an AAA server, which could be TACACS/RADIUS or local.
View 2 Replies View RelatedMy cisco works LMS3.2 is not showing recent configuration of my Cisco devices. also it dont show any change report on last 24 hours or even if i select x number of day, looks like its not saving any changes made on devices.
today i logged in and cisco ASA was showing this in status as well Configuration Last Archived Time May 03 2012 11:27:46 EDT on checking i could see it is same date when cisco ASA was added in cisco works. do i need to click some where for auto update configuration changes and latest confoguration in cisco works setting?
I get a lot of e-mails that have images, and when I try to open them I get the message, dns server not responding.
View 14 Replies View Relatedsince upgrading to 8.4(1) on our ASA 5520 I've had nothing but issues with our email server not being able to send out emails (timeouts,corruption, etc) and tried everything and then it dawned on me to turn off ESMTP inspection on the ASA's.Since I've down that our Exchange server SMTP works perfectly again.Why is it that ESMTP corrupts emails so badly from exchange server? (ours is a 2010 sp1)does anyone actually use ESMTP inspection at all?
View 3 Replies View RelatedI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedI'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
View 1 Replies View RelatedI have configured the NCS 1.1.1.24 and its running fine, but i used the IP address 10.18.20.7(it was the WCS server), but now I want to use 10.18. 20. 8 (NCS Server) ip address.
so what should i do to change the ip address: I know only 1 thing that is, change the ip of the interface gig 0 .My main task is to run WCS and NCS parallal.
I have a srp521 and want to set it up as a vpn server so I can connect back from outside.On the router under the vpn tab I only have
Site to site IPSec VPN
IKE Policy
IPSecPolicy
GRETunnel
VPN Passthrough
Page 191 of the srp500 manual says Click VPN > Cisco VPN Server > Group. The Group window opens The manual also says only the serer or Site to site will work at one time, so where do I make the change to bring up the vpn server option?
I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies View Relatedhow to change a clinet as server for all the remaining clients in a local area network
View 3 Replies View RelatedI can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
View 3 Replies View Relatedwe are running LMS 4.0 on Windows Server 2008, and just changed the hostname of the server, as the former on reflected it being a test system. However, after rebooting the server (as required by windows), the LMS application did not launch.After rolling the windows server back to the old hostname, the LMS started working again.Why is this? Isnt it possible to change the server hostname after the LMS has been set up for the first time?
View 2 Replies View RelatedI have two 5500-controllers and one WCS-server. Now I will have to move the WCS-server to another subnet and change the IP, but it will keep the name.Will that effect the connection between the controllers and the WCS?Do I have the change anything in the configuration on the controllers or the WCS-server?
View 3 Replies View Relatedhow do i change existing server ip address to a different range,,what changes do i have to make?
View 3 Replies View Relatedhow can I change a computer from one network to other in order to use FTP server
View 4 Replies View Relatedi see there is an option to "allow password change" or "force password change" for guest roles in the NGS. But when i created a guest account using this guest role, after webauthentication , there is no prompt to change password. Is this the intended behaviour or is there anything else that i need to configure. Looking at it, i am not sure how the NGS would allow a "guest user" to really overwrite the password by allowing password change. ? is that not a security risk as well for the NGS ? my setup has 5508 anchor controller and NGS communicating via RADIUS.
View 7 Replies View RelatedWe have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
how to change a windows 2003 server name through client
View 1 Replies View RelatedIt works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies View RelatedI´m Trying to synchronize the clock with NTP server external, these ntp server only support NTP version 3.Can I change the NTP version in the ACE4710 Appliance to support the ntp server external?If is possible, How I can change it ?
This is the version:
Cisco Application Control Software (ACSW)
TAC support: [URL]
Copyright (c) 1985-2011 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
[code]....
Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies View RelatedIs it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.
View 1 Replies View RelatedWould it be possible to change it to something else like serviio?
View 3 Replies View RelatedOne of the companies I work for uses a DIR 655 router. I'm having some trouble using FTP there.Initially the problem was that FTP software would hang or give errors when trying to change directories on the remote server. This problem went away when I switched from passive FTP to Active FTP.Now using Active FTP, the files appear to be uploaded with no problem. However, on closer inspection, the uploaded file has 0 bytes on the remote server.
We are uploading from a Windows 7 machine and uploading to our Web Hosting Company's Windows Server. I've actually written the one piece of software that is showing this problem but it uses a widely known open-source FTP library written in .NET. I've never encountered either of these problems with my software until I encountered the DIR-655.The other FTP software client I've tried is FileZilla. It has the same problem, 0 bytes files when using Active FTP.
One solution I've seen on DSLReports was to disable the Stateful Packet Inspection part of the firewall (known as SPI). This is really not a good solution for two reasons. Number one, I do not have access to the router's firmware/ configuration. Number 2, the company has a DIR-655 because they want the additional security. If we're going to disable SPI it just defeats one of the major purposes of owning the DIR-655.
I have two Nexus 5520 running 5.0(3)N1(1c).
I have both boxes heading off to ACS for TACACS lo gin authentication and for command authorization. When I first set things up everything works fine. I have a shell profile configured in ACS with Cisco-av-pair*shell:roles="network-admin" to set the network-admin role. I even have command sets configured to deny the use of configure terminal as I am using switch configuration profiles. Everything runs fine. User lo gins are authenticated by ACS and users have the correct command set applied to them.
The problem comes when I make a change to a shell profile in ACS. Even something as simple as changing the name of a shell profile causes the 5520's to crash as soon as I try to log on. If I unplug the management link so that the TACACS server is unavailable I can log on fine with the local admin user.
The NEXUS console reports this error. (amongst many others)
EDNAM-NEXUS-2 %$ VDC-1 %$ %SYSMGR-2-SERVICE_CRASHED: Service "Tacacs Daemon" (PID 4331) hasn't caught signal 11 (core will be saved).
A show system reset-reason shows:
EDNAM-NEXUS-2# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 389 usecs after Wed Jan 18 12:32:49 2012
Reason: Reset triggered due to HA policy of Reset
Service: Tacacs Daemon hap reset
Version: 5.0(3)N1(1c)
Could this be a bug with Nexus/ACS?
I have a server with 4 ethernet ports, 1G, they are bonded together, two of them was pluged into cat6500 module WS-X6724-TX. now we have moved the two ports to the replace module WS-X6748-GE-TX.
I have checked server side, the bond configuration are same no changed. what is possible reason replace module will cause link offline? why "sh run all" give the port is shutdown?
I'm new to CiscoWorks and I inherited the system in my new job. We are running LMS 3.2 and I want to run a report to see what versions of IOS that are running on the network.
View 3 Replies View RelatedI have received emails in my inbox to say that emails i have sent have been returned but they are in chinese and I haven't sent them.
View 2 Replies View RelatedCan I retrieve emails that were deleted in error.
View 1 Replies View Relatedi am getting around 12 emails a day returned mail demon and i havent sent them my friends are gatting sick of this every time they log on
View 1 Replies View RelatedMy emails are not being sent POP3 failed, is there a troubleshoot, autofix website i can go to
View 4 Replies View Related