Cisco :: LMS 4.0 Fails To Start After Change Of Server Hostname?
Aug 9, 2011
we are running LMS 4.0 on Windows Server 2008, and just changed the hostname of the server, as the former on reflected it being a test system. However, after rebooting the server (as required by windows), the LMS application did not launch.After rolling the windows server back to the old hostname, the LMS started working again.Why is this? Isnt it possible to change the server hostname after the LMS has been set up for the first time?
View 2 Replies
ADVERTISEMENT
Feb 6, 2013
I have an ASA-5505 which I have been managing using ASDM from a PC and a Mac.I just happens that the Mac has not been used in a little while and when I tried to use ASDM on it, it fails.I've had a trawl through various posts and release notes (after updating various components in the process, incl Java with all the diabling/security updates of late) but am still having the problem and this is where I'm at:
- the ASA runs v8.4(2) and ASDM 7.1(1)52
- release notes state that ASDM 7.1 should work on Java 7 on Windows 7 and MacOS 10.7
- ASDM starts fine on my Windows 7 PC running Java 1.7.0_13
- I am also running Java 1.7.0_13 on MacOS 10.7.5
- on MacOS, ASDM starts, asks for credentials, download/refreshes the cached app... and then crashes with the following exception message:
The root cause of the issue seems to be that a Java class called apple.laf.AquaTableHeaderUI is not found..Now, I don't know much about Java, but that seems to be an Apple UI related class - I presume that it would be good to use this to give ASDM a more native look and feel, but why on earth is there no fallback? or am I missing something?
View 4 Replies
View Related
Apr 16, 2013
I have installed a switch (3560) that was from another site and changed all it's config and hostname etc and it is now live, however the syslog messages still see the old hostname, what could be causing this?
View 3 Replies
View Related
Apr 29, 2012
We're in the process of implementing an ISE 1.1 server for Guest Wireless Access / BYOD at our company and ran into an issue with authenticating from iPhones / iPads when the account is set with 'change password on next logon' (it's a local account created on the ISE server - not AD). It fails and displays 'unable to join network' on the iPhone. The ISE log shows a '5411: No response received in 120 seconds'. We're able to authenticate from Windows devices and are prompted to change the password during the authentication process. If we unchecked the 'change password' box we can authenticate from iPhones & iPads without any issue but we need to have a way for users to set their own password.
View 3 Replies
View Related
Aug 9, 2011
IP address of Primary had to be changed, to respond to a hardware failure of TACACS server with IP in many device configs.
Now the Secondary fails to respond to repeated "Deregister from Primary" requests, even after reload - apparently because it cannot reach the Primary at its old IP address.
Requesting Deregister in GUI generates pop-up that says, "This operation will deregister this ACS Instance from the Primary Instance. Management applications on this ACS instance will be restarted and you will be required to login again. After performing this operation
[code]....
View 1 Replies
View Related
Mar 24, 2011
I have a server on Intel PC and the computer used to start up if the power shutdown and then come back. However, lately , I notice that when the power shutdown and then come back, the server is not turning on and have to press the turn on button on the PC.
View 2 Replies
View Related
Feb 22, 2011
System was running fine untill about two days ago. File and print sharing stop working. went to services and tried to restart "Computer Browser". It would not start due to a dependancy. Tried to start "Server Services" Got the following error. "Can not start Server Service on local computer, Error 2:The system cannot find the filed specified". The files srvsvc.dll 95KB 4/14/2008 The file srv.sys 327KB 4/14/2008.If I delete either of these files they are just created again. If I replace them with the new versions they are converted back to these files.I am running XP Pro SP3.
View 3 Replies
View Related
Mar 15, 2012
how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies
View Related
Dec 21, 2010
I am working through the migration from ACS 4.1.4 on Windows Server 2003 to ACS 5.2 on the appliance. I have created the 4.1.4 migration server, installed the software and imported the data from our production ACS 4.1.4 box. I downloaded the migration utility from the 5.2 ACS server and am attempting to run on the 4.1.4 migration server. The question that fails is:
Enter ACS 4.x Server ID:
I do not know what this means and do not see anything on the 4.1.4 server that identifies the Server ID. I try localhost and it does not work and the 4.1.4 server is not registered in DNS or I would try that (and . are not valid characters in the ID so the IP does not work).
How have other people handled this question? Is there something that can identify the local server ID?
View 9 Replies
View Related
Aug 3, 2012
Minecraft 1.3 LAN server function fails because host IP bad. The host (a laptop) connects to the LAN with a proper 10.0.1.X type address, but this particular laptop uses a 169.* address when it establishes/reports the game (instead of it's 10.0.1.X) and no other computer can connect to it. Other computers DO establish/report the 10.0.1.X address they receive from the wireless router, and they can host just fine- but I really need to get the one laptop to serve as host since it has more horsepower.
View 10 Replies
View Related
Apr 24, 2012
New E4200v2 @ firmware 2.0.36. The FTP server will go offline about once every 24 hours. I can revive it by simply clicking on Save in Storage/Administration or FTP Server. I don't have to change anything, just click Save. How can I keep the FTP running?
"Disk" is a 16gb USB flash memory. Formated FAT32, 1 partition, 6 users besides Admin and Guest, 2 groups besides Admin and Guest.
View 2 Replies
View Related
Nov 29, 2011
I recently "inherited" a CSS 11503 - I've only used ACEs before - and I want to get HTTP keepalives working.To start, I created a test service:
lb-1# show run service sunbird-http-7025-test
!************************** SERVICE **************************
service sunbird-http-7025-test
port 7025
ip address 141.211.229.168
[code].....
View 2 Replies
View Related
Oct 14, 2012
I've done a lot of ACE work over the years but this is the first time this has ever come up.
I have a request from an application group where I have 3 rserver in the server farm but they want all traffic to only go to the first server unless that server fails. If the first server fails, only then do they want traffic to go to the 2nd server instead and if that fails, then traffic goes to the 3rd.
I've read through the documentation but haven't figured out a way to do this. What to do this type of failover configuration?
View 4 Replies
View Related
Mar 9, 2011
We are using an ASA with 8.4 in transparent mode. Connection fails when a host on inside tries to connect to a server on outside. This server uses mac-address 0100.5E00.0000 to load balance but replies with real mac-address.Firewall logs "Deny TCP".ARP inspection is disabled.
View 2 Replies
View Related
Jul 21, 2011
After we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
View 21 Replies
View Related
Mar 18, 2013
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies
View Related
Nov 16, 2011
I have a 3845 router. Setup SSH Version 2generated rsa keys (1024)set login localtransport input ssh and telnet is enabled since I can't get ssh connection working When I connect using SSH, I get the following error. server refused authentication protocol.
View 21 Replies
View Related
Sep 1, 2012
I tried to remotely access my disk connected to the USB port of the EA4500 and it failed until I disabled the IPv4/IPv6 SPI Firewall options. Surely, the firewall should not block the router's own FTP server!
View 8 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Aug 23, 2012
I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
View 1 Replies
View Related
Sep 10, 2012
I have configured the NCS 1.1.1.24 and its running fine, but i used the IP address 10.18.20.7(it was the WCS server), but now I want to use 10.18. 20. 8 (NCS Server) ip address.
so what should i do to change the ip address: I know only 1 thing that is, change the ip of the interface gig 0 .My main task is to run WCS and NCS parallal.
View 1 Replies
View Related
Nov 13, 2012
I have a srp521 and want to set it up as a vpn server so I can connect back from outside.On the router under the vpn tab I only have
Site to site IPSec VPN
IKE Policy
IPSecPolicy
GRETunnel
VPN Passthrough
Page 191 of the srp500 manual says Click VPN > Cisco VPN Server > Group. The Group window opens The manual also says only the serer or Site to site will work at one time, so where do I make the change to bring up the vpn server option?
View 1 Replies
View Related
Feb 13, 2012
Currently, my report links are displaying the server as "lms" instead of "lms.domain.net". Where do I change this within LMS?
View 2 Replies
View Related
Oct 11, 2011
I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies
View Related
Mar 8, 2011
how to change a clinet as server for all the remaining clients in a local area network
View 3 Replies
View Related
May 21, 2012
I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
View 3 Replies
View Related
Aug 27, 2011
I have two 5500-controllers and one WCS-server. Now I will have to move the WCS-server to another subnet and change the IP, but it will keep the name.Will that effect the connection between the controllers and the WCS?Do I have the change anything in the configuration on the controllers or the WCS-server?
View 3 Replies
View Related
Jan 22, 2013
how do i change existing server ip address to a different range,,what changes do i have to make?
View 3 Replies
View Related
Mar 20, 2013
how can I change a computer from one network to other in order to use FTP server
View 4 Replies
View Related
Dec 25, 2011
i see there is an option to "allow password change" or "force password change" for guest roles in the NGS. But when i created a guest account using this guest role, after webauthentication , there is no prompt to change password. Is this the intended behaviour or is there anything else that i need to configure. Looking at it, i am not sure how the NGS would allow a "guest user" to really overwrite the password by allowing password change. ? is that not a security risk as well for the NGS ? my setup has 5508 anchor controller and NGS communicating via RADIUS.
View 7 Replies
View Related
Jan 19, 2012
We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
View 1 Replies
View Related
Mar 8, 2011
how to change a windows 2003 server name through client
View 1 Replies
View Related
Jul 19, 2012
It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies
View Related