Servers :: How To Change Client As Server

Mar 8, 2011

how to change a clinet as server for all the remaining clients in a local area network

View 3 Replies


ADVERTISEMENT

Servers :: Change A Windows 2003 Server Name Through Client?

Mar 8, 2011

how to change a windows 2003 server name through client

View 1 Replies View Related

Servers :: Ping Server But Cannot Browse On Client?

Mar 16, 2011

two of my workstation can not receive ip address from the server but can ping server. So i can not browse with them

View 3 Replies View Related

Servers :: How To Install Software From Server To Client

Aug 24, 2011

how to install software in a client system from server with out disturbing client system,

View 1 Replies View Related

Servers :: How To Change The Network

Jan 11, 2011

how to change the network

View 1 Replies View Related

Servers :: Change Device Gateway?

Aug 2, 2011

how do i change a default gateway? the current gateway 170.130.110.254 needs to be changed to 170.130.110.2 so my two devices at separate locations can communicate with each other

View 1 Replies View Related

Servers :: How To Change Name Of System Remotely

Jul 27, 2011

I work for a company that has several offices in various parts of the country, my job is to change the name of all the machines on our network to our new naming convention. I need to perform this task without causing a distrubance to the other users.

View 2 Replies View Related

Unable To Change TCP/IP And DNS Servers Settings?

Feb 21, 2013

I have DELL desktop PC with Windows 7 64 bit. Once i have used HotSpot Shield for few days. After uninstalling the HotSpot, I am unable to change TCP/IP and DNS servers settings. My network adaptor is set up to default (automatically obtain ip address). Each time when i tried to change the dns servers settings, it requires a reboot (which is not happened with other PCs). and after reboot, its again set up to obtain ip and dns servers settings automatically.I have Avira FREE antivirus and its not showing any virus.I have cleaned my PC using Malwarebytes, some virus detected and removed but in vain.I am still unable to change my Network Adaptor's dns servers settings.

View 1 Replies View Related

Servers :: How To Change From NO To YES In DHCP Enabled

Jan 19, 2011

Ethernet adapter Local Area Connection 2; DHCP Enabled: No

View 4 Replies View Related

Servers :: How To Change Smtp To Get On Internet

Dec 11, 2011

How can i change smtp to get on internet

View 3 Replies View Related

Servers :: Change User Name And Password On Sever / PC?

Feb 23, 2012

Change user name on server & pc

View 3 Replies View Related

Servers :: Rejecting To Log On If Client Is Offline

Jan 6, 2012

i am a ict teacher. at my lab all student computers (clients - win 7 ultimate) are connected to server 2008 machine. student are unplugging the network cable and try to log on some account which has time restriction so client computer is logging him on by using cache user. how can i solve that problem.i want always the network cable to be plugged and force students to use their own account in lesson time.

View 3 Replies View Related

Servers :: Default Gateway / IP And DNS Address For Client PC?

May 29, 2012

Client is having 1 file server running small business windows server 2003. Server is not configured with domain, it is working only on workgroup. We have around 15 users who are using that server as file server only. Now my main question is do i need to configure DNS server in that server?we also have internet connection running (have problem in that also, will explain next time) with wireless router to connected with switch. So do I need to setup dns in server also or just put static ip (I prefer static then dhcp) & dns server from ip will be ok? If I put dns which I got from ISP, so will it create any problem with using those file from server?the second question is..

What IP address, Default gateway and dns address I should use for Server & also client pc.
router ip - 192.168.1.1
server ip - 192.168.1.10
Currently no DNS setupcurrent configuration - Server
IP - 192.168.1.10
subnet- 255.255.255.0
gateway - 192.168.1.1
dns - 213.42.20.20 (from ISP)
dns2 - xxx.xx.xx.xx (from ISP)current configuration - Client
IP - 192168.1.111(to 115)
subnet - 255.255.255.0
gateway - 192.168.1.1
dns 1 - 192.168.1.10 (File Server)
dns 2 - 213.42.20.20 (from ISP)

View 2 Replies View Related

Client Expects Port 21 But FTP-servers Have Same IP Address?

Mar 19, 2013

My setup is as follows: as a part of a global network, I have two separate measurement stations collecting data in the field. They are working with some kind of embedded linux system and is running an FTP-server so that I can download collected data. I have some control over the stations, which e.g. means that I can select the port used for the FTP-server (default is 21).Unfortunately, for this particular set of measurement stations, they are connecting via FTP-over-radio-link to another station which is connected to my computer via a router (on the server-side) and I can only "see" their common external IP address. If I have understood this correctly, they can not use the same port for FTP traffic, right? The router used is some (for me) unknown brand with unknown capabilities, so I don't expect/want a solution at that end.Now, to my problem: as a part of this global network there is a custom software running on my computer that automatically connects to all the different stations to download and process the data. This software runs on any recent version of Windows, but I'm running Windows XP right now. There is no way for me to modify this software at this point (for the future, maybe, but not now), and unfortunately it has a severe limitation: it MUST use port 21 for FTP-connections.My first attempt was to set the FTP-port to 2121 for one of the servers and create another IP address on my client network adapter and try to forward port 21 of this new IP to port 2121 on the server/router side, but due to lack of knowledge and experience I did not manage to get this working fully.

View 9 Replies View Related

Cisco VPN :: ASA 5510 / VPN Client Cannot Access Remote Servers

Mar 27, 2011

I have successfully installed and configured VPN Client - Version 5.0.07 to connect to ASA 5510 from a remote workstation. Here is the problem, I cannot ping any of the servers or workstations after I successfully connect. I can ping the ASA 5510 using its internal LAN IP, but no other nodes will respond on the remote LAN.

View 2 Replies View Related

Windows 2003 Server - Dhcp Server Cannot Ping Client

Sep 29, 2011

i am facing the same problem now but am using windows 2003 server

View 1 Replies View Related

How To Change Ddwrt Dir-615 Client Bridge

Aug 3, 2011

I recently downloaded DDWRT to my DIR-615. I was trying to change my DIR-615 from a router to a client bridge but I was not able to get any internet connection on the device after I change the settings.

View 1 Replies View Related

Cisco VPN :: 2900 ISR / Change VPN Client To Over TCP?

Nov 13, 2011

I have a 2900 ISR that my VPN clients connect to using IPSEC over UDP.  I am having periodic problems, especially with clients connecting through DSL, where they connect and immediately drop.  Sometimes this is resolved by users updating their home router firmware.  I'd like to issue a new client PCF file using IPSEC over TCP to see if that resolves the problems.
 
Can I have both running at once, and what do I need to add to the 2900 to enable this connectivty without breaking the existing clients?  If the test is successful, I will migrate all users to the new configuration.  This ISR is also used to support L2L connectivity for a handful of sites.

View 1 Replies View Related

Cisco VPN :: 1921-SEC (ISR) / How To Push Route To Client 5.0.x / Change To TCP

Apr 20, 2011

We are using a CISCO1921-SEC (ISR) with IOS 15.1 and we configured a "crypto isakmp client configuration group". We can connect with the "Cisco System VPN Client Version 5.0.07.0410" via IPSec/UDP.

1. Is it possible to push routing informations to the System running the VPN Client ? A the moment all traffic is routed to the tunnel but we like only one route to the network permitted with "pool ..." in the "crypto isakmp client configuration group NAME" section.

2. We searched for changing from upd connection to tcp connection via special port. Is it possible with IOS 15.1 on the CISCO1921-SEC ? Is there something possible like "iskamp ipsec-over-tcp port 10000" ?

View 8 Replies View Related

Cisco VPN :: VPN 3000 Client Users Change Password

Apr 1, 2013

For access by external users on our network use all Cisco VPN Client, we have a VPN3000 Concentrator and a Cisco ACS 2.6 for authentication.We wanted to upgrade to the latest release of ACS 4, x .... you can set a password expiration for VPN Client? Or make sure that the remote user can change password?

View 2 Replies View Related

Cisco Routers :: 887VA Cannot Expect Client To Make Change Every-time

May 16, 2013

I have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.

View 1 Replies View Related

Cisco VPN :: Password Change Using AnyConnect Secure Mobility Client ASA 5520

Jun 3, 2013

We are using an ASA 5520, running 8.4(3).  We have users running the AnyConnect Secure Mobility Client 3.1.02026.  I have the AnyConnect connection profile configured to authenticate users using LDAP over SSL.  I enabled the password management and am able to get password change prompts to appear in the AnyConnect client.  However, new passwords are rejected and changing passwords through that prompt does not work.  I'm not sure what the cause of the problem is, since LDAP over SSL is enabled and working, which is required for the password management feature

View 9 Replies View Related

Cisco :: WLC-5508 - Change Timeout For Client Excluded (MACAddress Status)

Feb 7, 2012

Is there a way to change the timeout for the Client Excluded: MACAddress status?  It seems like the exclusion is rather short.  I'd like to have the ability to control the exclusion time.  Using WLC-5508 7.0.116.0.

View 2 Replies View Related

Servers :: Connect Two Server In One Hub?

Mar 31, 2011

i am having two server of windows 2003 server that has to be connected in a single hub

View 1 Replies View Related

Servers :: How To Find Out Server Name In Cmd

Mar 28, 2011

How to find out server name in cmd prompt? ping -a IP address is not showing server name.

View 5 Replies View Related

Servers :: Mac Not Seeing Server After Adding Second Ip?

Nov 26, 2012

I just had comcast business class installed. They installed a SMC d3g router. It does not support nat loopback. I had a server installed and could not browse to it inside the lan because of this issue. I was instructed that I needed to set the the servers IP to the external address and open the ports to that. That worked, and I added an internal address 10.1.10.x so that I could see it inside the firewall. The issue that I am having is that since I did this, the server can not be seen by the macs and the mac shares don;t show up for them.

View 4 Replies View Related

Servers :: Net Send Is Not Available In Server 2008?

Aug 24, 2011

net send command not available on server 2008

View 1 Replies View Related

Servers :: Communicate Two Server Computer With Each Other

Jun 22, 2012

I have two server computers. there IP addresses are:

1. 192.168.0.99
2. 192.168.1.99

Now, how to configure it for accessing data from each other?

View 7 Replies View Related

Servers :: How To Set To Up File Server In Office

Aug 25, 2011

I was hoping if someone could give me some suggestions on this matter. I have some IT knowledge but a bit rusty.I currently have 25 pcs all running web based applications on their own. So filesharing is a headache. I decided to setup a small file server for the office.This is what I need the server to do.1) Internet connection comes through server protected by a firewall and then distributed to the 5 pcs (star topology)2) Print and file sharing.3) application sharing (accounting software)4) fax facilitiesMy question to you all:How do I go about setting this up. What do I need (OS, softwares, etc)How do I secure the internet and distribute it to the rest.witch, router, etc)

View 1 Replies View Related

Servers :: 2 Dhcp Server On The Same Lan Segment?

Apr 14, 2011

2 dhcp server on the same lan segment not thesame ip add series , how can i prevent to lease ip from another ip series

View 2 Replies View Related

Servers :: Vpn And Wimax Connection On The Same Server?

Sep 20, 2011

I have a server running win2000 server managing a network of 30 computers, it als a proxy server where all pc connecting to for internet access. The server is connected to Wimax through a router. Lately i have a vpn for PDA's through GSM lines where am supposed to connected a Modem (part of VPN)to this server so that PDA' s and modem can be on the vpn.The problem is that when I connected the GSM Modem the internet connection through router get disconnected. How do I connect the modem on the server without disconnecting the wimax internet connection

View 3 Replies View Related

Servers :: Can't Find Server Name For Address?

Jun 6, 2012

cant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information

View 1 Replies View Related

Servers :: How To Add 10 PC's To Server 2003 Domain

Mar 16, 2011

how can i add 10 pc's to server 2003 domain

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved