Servers :: Mac Not Seeing Server After Adding Second Ip?
Nov 26, 2012
I just had comcast business class installed. They installed a SMC d3g router. It does not support nat loopback. I had a server installed and could not browse to it inside the lan because of this issue. I was instructed that I needed to set the the servers IP to the external address and open the ports to that. That worked, and I added an internal address 10.1.10.x so that I could see it inside the firewall. The issue that I am having is that since I did this, the server can not be seen by the macs and the mac shares don;t show up for them.
Iam trying to add servers to Tor (torproject.org) to remove country restrictions on videos from different websites such as bbc.com and i don't know how to do it. I got the server but I don't know what do do next?
so i want to move my dns and dhcp to a server (sbs2011). i am currently using a netgear 3700. i am a little confused on how to set this up. i know to turn off dhcp on the router. will the server give out a dns address? do i even need to router, or could i just use a switch?
I work in a small group with a network server so we can share files and documents from computer to computer. I am trying to access this server on a new computer and am not having any luck finding instructions on how to do so. I don't need to sign in to the network (to gain access to internet browser, etc), I need to be able to add this computer to our server so I can view these folders & files on this new computer.
I have a pair of managers in HA mode and a pair of servers in HA mode. The solution is working in OOB Virtual Gateway. When i add the server in the manager, which IP address must i use, the service IP address or the physical Ip address.I'm running 4.8.2
At my office we have a dell server running windows small business server 2003, there are around 15 computers on our network running mostly windows 7 (a few with XP). I am wondering how difficult it is to add a computer to the network so it can log into our domain and all that.I just had to reformat one of the computers and would normally wait for our network guy to do it remotely but If i could do it myself it would save time (and money). I am already an administrator and basically i just need to make it so the log in prompt when windows starts has our office network listed as the domain instead of jus the local log in. It is a dell running windows 7 64 bit.
I was hoping if someone could give me some suggestions on this matter. I have some IT knowledge but a bit rusty.I currently have 25 pcs all running web based applications on their own. So filesharing is a headache. I decided to setup a small file server for the office.This is what I need the server to do.1) Internet connection comes through server protected by a firewall and then distributed to the 5 pcs (star topology)2) Print and file sharing.3) application sharing (accounting software)4) fax facilitiesMy question to you all:How do I go about setting this up. What do I need (OS, softwares, etc)How do I secure the internet and distribute it to the rest.witch, router, etc)
I have a server running win2000 server managing a network of 30 computers, it als a proxy server where all pc connecting to for internet access. The server is connected to Wimax through a router. Lately i have a vpn for PDA's through GSM lines where am supposed to connected a Modem (part of VPN)to this server so that PDA' s and modem can be on the vpn.The problem is that when I connected the GSM Modem the internet connection through router get disconnected. How do I connect the modem on the server without disconnecting the wimax internet connection
cant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
I have a VPN with a number of servers where we are doing some software development. We have a TFS, Web, App and SQL Server etc.. inside a private LAN which is accessible via VPN. Nothing inside the private network can access outbound. However, I would like to open the Web Server on the private LAN to be able to be accessed via http(s).As we develop the software I want to access the site from the internet.It's a fairly simple setup.DSL > Modem > Home Lan. On the Home Lan I have a Server (2 ethernets) connected to the modem router and the other card to a hub. This server acts as the VPN server, DHCP etc.. for the Private LAN.The web server I want to be able to access from outside is the one inside the private network. Any recommendations?fyi, I'm not a networking guy, I hacked my way through setting up the private network through a number of great YouTube videos, that saved me a lot of time.
We are looking for a print server that saves prints to a hardrive when printed from anywhere on a network.What is meant by saves prints meaning that they can be accessed anytime during the future for reference and security reason
My pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
I need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
i have a network setup like the image in the link(url) and am asking how to make the PC's behind the router to reach the mail server??,when i ping the ip of the server i get timeout.
I have an office server set up to about 10 computers. We hired 4 new people and had to set up their computers on our network. Set up was easy and quick as usual. But when I was done, the other computer users, and even the new ones were complaining about not being able to access the DEFCON5 (name of our server) folder to get what they needed. Basically the only workstations that show up when I click Network are the computers I added the other day, and the computer that is used more than any other computer (the CEO's). We can still access the files by typing the location as \DEFCON5****** and find what we need. But not everyone at my office is computer savy (no body is) and I would like to not have to keep running around and showing everyone this.
I am wanting to improve my download and upload speeds. I read this statement at maheez.com "Solution for requesting pages is set up your own DNS server, with is kinda complicated (basically what happens, is instead of asking some remote server (takes time) for the site IP needed to connect to, youll request it on your own pc, giving you a higher site access speed).
the linux server should be configured with LDAP, so that any user should not login into that machine by local user credentials but by his intranet credentials.
Lost internet access through server after change router LAN ip.I did every thing still dont have access to internet .and also read this post:
http:[url]....
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it, and i can ping the router from server3 client through cable and 2 client through WLAN.
I have three pier to pier computers (two Win 7, one XP). I have a new server on the way (HP Mediasmart EX495 with Window Home Server). What is the best way to gather all the files from the three machines and move them to the server and eliminate dedundancy? Is there an efficient and recommended procedure, or should I just block out a few days and hunker down for the big task...
