Servers :: Vpn And Wimax Connection On The Same Server?
Sep 20, 2011
I have a server running win2000 server managing a network of 30 computers, it als a proxy server where all pc connecting to for internet access. The server is connected to Wimax through a router. Lately i have a vpn for PDA's through GSM lines where am supposed to connected a Modem (part of VPN)to this server so that PDA' s and modem can be on the vpn.The problem is that when I connected the GSM Modem the internet connection through router get disconnected. How do I connect the modem on the server without disconnecting the wimax internet connection
The DNS comes request timed out while pinging and i am unable to browse. But the Same LAN cable is working fine in another pc. I can ping the Gate way. But not able to ping DNS.Local Network is working fine.
When i access a url with http, it works fine. But with https it dosen't work, and get the message on the firefox as "The proxy server is refusing connections Firefox is configured to use a proxy server that is refusing connections. Check the proxy settings to make sure that they are correct. Contact your network administrator to make sure the proxy server is working.
I just had comcast business class installed. They installed a SMC d3g router. It does not support nat loopback. I had a server installed and could not browse to it inside the lan because of this issue. I was instructed that I needed to set the the servers IP to the external address and open the ports to that. That worked, and I added an internal address 10.1.10.x so that I could see it inside the firewall. The issue that I am having is that since I did this, the server can not be seen by the macs and the mac shares don;t show up for them.
I was hoping if someone could give me some suggestions on this matter. I have some IT knowledge but a bit rusty.I currently have 25 pcs all running web based applications on their own. So filesharing is a headache. I decided to setup a small file server for the office.This is what I need the server to do.1) Internet connection comes through server protected by a firewall and then distributed to the 5 pcs (star topology)2) Print and file sharing.3) application sharing (accounting software)4) fax facilitiesMy question to you all:How do I go about setting this up. What do I need (OS, softwares, etc)How do I secure the internet and distribute it to the rest.witch, router, etc)
cant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information
I have this laptop with a built-in Intel Centrino Advanced-N + Wimax 6250 adapter to connect to WiMAX.Right now I have a WiMAX connection at home with a simple gateway. So what I want to do right now is trying to connect to this network using my built-in adapter.I'm facing right now is that the driver of the adapter only searchs for a certain provider from the US (Clear). I'd like to subscribe to their service but I live in Argentina so that's not a valid option. So my question is if you know of a custom driver or some other way to search for my local wimax network.
how we can combine the LAN and Wimax connections? We are using here in our office one Fiber optic line that is running fine and we want to make up a backup connection of Wimax or wireless, how we can combine these two connections ,Moreover we are using here D-Link firewall and Netgear FS-726T Router.
I've got the Di-614+ connected to a Wimax system. The Wimax is plugged into one of the LAN jacks in the Di-614+ (i tried pluggin it into the WAN jack but it does not work). I'm able to use the internet fine without any problems using the wireless connection on my laptop.
The thing is the ip 192.168.1.1 is set to open up the setup page of my Wimax modem. I cant seem to access the setup page of my Di-614+. I tried disconnecting the Wimax jack, and still google chrome just responds with "This webpage is not available". My other option is to hard reset the wireless router. But i worry it will ask for a password and i wont know it.
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
I have a VPN with a number of servers where we are doing some software development. We have a TFS, Web, App and SQL Server etc.. inside a private LAN which is accessible via VPN. Nothing inside the private network can access outbound. However, I would like to open the Web Server on the private LAN to be able to be accessed via http(s).As we develop the software I want to access the site from the internet.It's a fairly simple setup.DSL > Modem > Home Lan. On the Home Lan I have a Server (2 ethernets) connected to the modem router and the other card to a hub. This server acts as the VPN server, DHCP etc.. for the Private LAN.The web server I want to be able to access from outside is the one inside the private network. Any recommendations?fyi, I'm not a networking guy, I hacked my way through setting up the private network through a number of great YouTube videos, that saved me a lot of time.
We are looking for a print server that saves prints to a hardrive when printed from anywhere on a network.What is meant by saves prints meaning that they can be accessed anytime during the future for reference and security reason
My pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
I need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
i have a network setup like the image in the link(url) and am asking how to make the PC's behind the router to reach the mail server??,when i ping the ip of the server i get timeout.
I have an office server set up to about 10 computers. We hired 4 new people and had to set up their computers on our network. Set up was easy and quick as usual. But when I was done, the other computer users, and even the new ones were complaining about not being able to access the DEFCON5 (name of our server) folder to get what they needed. Basically the only workstations that show up when I click Network are the computers I added the other day, and the computer that is used more than any other computer (the CEO's). We can still access the files by typing the location as \DEFCON5****** and find what we need. But not everyone at my office is computer savy (no body is) and I would like to not have to keep running around and showing everyone this.
I am wanting to improve my download and upload speeds. I read this statement at maheez.com "Solution for requesting pages is set up your own DNS server, with is kinda complicated (basically what happens, is instead of asking some remote server (takes time) for the site IP needed to connect to, youll request it on your own pc, giving you a higher site access speed).
the linux server should be configured with LDAP, so that any user should not login into that machine by local user credentials but by his intranet credentials.
