Servers :: Change Device Gateway?
Aug 2, 2011how do i change a default gateway? the current gateway 170.130.110.254 needs to be changed to 170.130.110.2 so my two devices at separate locations can communicate with each other
View 1 Replies
ADVERTISEMENT
Servers :: Default Gateway / IP And DNS Address For Client PC?
May 29, 2012Client is having 1 file server running small business windows server 2003. Server is not configured with domain, it is working only on workgroup. We have around 15 users who are using that server as file server only. Now my main question is do i need to configure DNS server in that server?we also have internet connection running (have problem in that also, will explain next time) with wireless router to connected with switch. So do I need to setup dns in server also or just put static ip (I prefer static then dhcp) & dns server from ip will be ok? If I put dns which I got from ISP, so will it create any problem with using those file from server?the second question is..
What IP address, Default gateway and dns address I should use for Server & also client pc.
router ip - 192.168.1.1
server ip - 192.168.1.10
Currently no DNS setupcurrent configuration - Server
IP - 192.168.1.10
subnet- 255.255.255.0
gateway - 192.168.1.1
dns - 213.42.20.20 (from ISP)
dns2 - xxx.xx.xx.xx (from ISP)current configuration - Client
IP - 192168.1.111(to 115)
subnet - 255.255.255.0
gateway - 192.168.1.1
dns 1 - 192.168.1.10 (File Server)
dns 2 - 213.42.20.20 (from ISP)
Servers :: How To Change The Network
Jan 11, 2011how to change the network
View 1 Replies View RelatedRouters / Switches :: DNS Servers Show Default Gateway As Server Ip?
Mar 24, 2011ipconfig /all reports one of my three DNS servers as 192.168.1.1. My Default Gateway and DHCP Server are also reported as 192.168.1.1. This is from a recently installed Valet M10 updating an old Linksys router. The Linksys reported the three DNS servers octets independent of the router's ip and other default settings.JK
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - How To Remove Gateway From DNS Servers
Sep 24, 2012I have a Linksys E3000 and I see the gateway (192.168.1.1) listed in my DNS server addresses.
1. Why is this listed here in the DNS?
2. How do I remove it from my DNS servers or stop the router from inserting it into my DNS server list?
Servers :: Sync Status Is On The Device?
May 16, 2011sync status is on the device, is what I see trying to connect to my outlook, I had to change laptops and I can't remember how to sync with outlook?
View 1 Replies View RelatedServers :: How To Change Name Of System Remotely
Jul 27, 2011I work for a company that has several offices in various parts of the country, my job is to change the name of all the machines on our network to our new naming convention. I need to perform this task without causing a distrubance to the other users.
View 2 Replies View RelatedUnable To Change TCP/IP And DNS Servers Settings?
Feb 21, 2013I have DELL desktop PC with Windows 7 64 bit. Once i have used HotSpot Shield for few days. After uninstalling the HotSpot, I am unable to change TCP/IP and DNS servers settings. My network adaptor is set up to default (automatically obtain ip address). Each time when i tried to change the dns servers settings, it requires a reboot (which is not happened with other PCs). and after reboot, its again set up to obtain ip and dns servers settings automatically.I have Avira FREE antivirus and its not showing any virus.I have cleaned my PC using Malwarebytes, some virus detected and removed but in vain.I am still unable to change my Network Adaptor's dns servers settings.
View 1 Replies View RelatedServers :: How To Change Client As Server
Mar 8, 2011how to change a clinet as server for all the remaining clients in a local area network
View 3 Replies View RelatedServers :: How To Change From NO To YES In DHCP Enabled
Jan 19, 2011Ethernet adapter Local Area Connection 2; DHCP Enabled: No
View 4 Replies View RelatedServers :: How To Change Smtp To Get On Internet
Dec 11, 2011How can i change smtp to get on internet
View 3 Replies View RelatedChange The Default Gateway Of RDP On Server?
Oct 11, 2011I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies View RelatedChange The Gateway Ip On A Wireless Router?
Jun 14, 2012I just got a wireless router to use with my Hughesnet modem, and it worked fine but my mom turned off the power strip that everything was plugged into and now it won't work. My dad says it's because the Ivip4IP gateway was messed up or something, and I need to change the wireless router's gateway IP to the computer's default.
View 1 Replies View RelatedCisco VPN :: Change Gateway Through ASA 5505
May 28, 2011I have four ASA 5505 devices connected via tunnels. All of the tunnels have a single point of exit to the outside, an AT&T T1 line. Because of issues with bandwidth, I added a secondary line to each site. In this case the secondary line is a comcast high speed internet connection. What I would like to do is set up a route so that any traffic that is going to the internet (browser or email) be directed through the Comcast line and all internal traffic (file transfer, ERP, VOIP) can be directed to the AT&T line. Each has a separate ip address. There is a single default gateway set up on the ASA now.
View 1 Replies View RelatedCisco Application Networking :: ACE 4710 Test Web Servers / Need To Use ACE As Their Default Gateway
May 26, 2011I'm setting up an ACE 4710 in our test lab before deploying in production. Do the test web servers I am using need to use the ACE as their default gateway? The are currently configured to use a multilayer switch on their vlan as their gateway but I'm guessing the ACE needs to see the return traffic for load balancing to work correctly?
View 2 Replies View RelatedCisco Switching/Routing :: 3560 - Servers Updated When Gateway MAC Address Changes?
Feb 7, 2012We have a server connected to a 3560 switch which in turn connects to 6500s. The gateway interface is on the 6500. We will be changing the 6500s so the mac address for the gateway will change, however the IP address will remain the same. As we change out the 6500s the uplink connections to the 3560 will go down. This will flush the old mac address from the 3560.When the 3560 removes a MAC address does it update servers so they have to relearn the correct MAC address?
View 4 Replies View RelatedServers :: No Network Adapter In Device Manager?
Apr 11, 2011HP computer, was working last friday and today it isnt. Can not connect to the internet or outlook etc. Looked in BIOS says it is conected to LAN - tried enabling and disabling it and re-booting it. Still nothing. Had a tech guy that said to look in device manager, but network adapter was no where to be seen. What shall i try next to resolve this problem?
View 1 Replies View RelatedServers :: Change User Name And Password On Sever / PC?
Feb 23, 2012Change user name on server & pc
View 3 Replies View RelatedServers :: Change A Windows 2003 Server Name Through Client?
Mar 8, 2011how to change a windows 2003 server name through client
View 1 Replies View RelatedCisco IOS On 877s - How To NAT To A Device That Doesn't Have A Default Gateway
Aug 4, 2012I'm trying to NAT to a device that doesn't have a default gateway; effectivley we want to talk to the device as if we're on the same LAN but using only port 80.Here's the setup:
Remote Device on LAN A <-> RA <-> Remote router WAN A <-> ISP <->--
--<->ISP <-> Remote router WAN B <-> RB <-> Remote Device LAN B (no default gateway)
We're using Cisco IOS on 877s and I'm sure this can be done
How To Change Bluetooth Device Name
Mar 26, 2012I have a device specific question. I was wondering how/if it would be possible to change an aftermarket device's bluetooth name? For example, this bluetooth dongle. I need to be able to connect multiple bluetooth transmitters to either 1 receiver or an equal amount of receivers without the 'same' devices interfering with each other, and these dongles are the cheapest on the net. I'm assuming I'll need to get into it on my computer somehow to change the name.
View 1 Replies View RelatedGateway NV59C / Cannot Find Wireless Adapter In Device Manager
Dec 19, 2011can't find my wireless adapter in Device Manager.I was able to detect wireless connectivity yesterday. After we replaced our router, my laptop says my wireless adapter is disabled.I am unable to find the "Manage wireless networks" in Open Network and Sharing Center. My Fn+F2 buttons used to enable and disable wireless is not working either. I tried setting up our previous router but it still won't work. I am using Windows 7. Gateway NV59C.
View 9 Replies View RelatedCisco Firewall :: ASA 5505 Portforwarding To Device With Different Default Gateway
Feb 27, 2012A customer got a new VoIP PBX, and now I have to forward port 443 on the ASA to the PBX for remote administration purposes. The LAN-interface of the PBX is in the same subnet as the ASA but has an external VoIP-router as default gateway and not our ASA. Is it even possible to forward the port to the PBX when there is no route of any sort to our ASA on it?
View 2 Replies View RelatedCisco WAN :: Does IP Default-gateway Have Any Effect On L3 Device Such As 2811 Router
May 21, 2013Does ip default-gateway have any effect on a L3 device such as a 2811 router? I always thought that on a L3 device the default route would supersede any such command assuming it is accepted.
We have a client device that cannot be reached for managment directly and wanted to add that statment only if it might work.
Cisco :: Prime LMS 4.2.2 - Change Device Ip Address
Jan 15, 2013is there anyway to change the IP address of a device without data lost? I saw an option in to change it in Inventory > Device Administration: Add / Import / Manage Devices > Edit identity but from what I read I can get a data lose,
View 1 Replies View RelatedCisco :: Change / Remove Gateway Within Of Routing Information Sources In OSPF Protocol
Jul 4, 2012I want to know could we change or remove the Gateway (highlight) within of Routing Information Sources in OSPF routing protocol? [code]
View 9 Replies View RelatedCisco :: LMS 4.1 Device Change Audit Lists Wrong Users?
Aug 14, 2011I have noticed that under the Device Change Audit list under the configuration dashboard. LMS lists the wrong user for the last change. For example. User ABC performed a change on a switch yesterday but switch shows user XYZ has performed the change.
e.g.
SwitchA
! Last configuration change at 16:27:06 AEST Mon Aug 15 2011 by ABC
User XYZ then performs changes on switchB, switchC. These show up correctly. but the change on switchA shows user XYZ instead of ABC.
User XYZ has never logged into the switchA in question.
Cisco Infrastructure :: 6506 To N7K Some Device Change Its IP Address Configuration
Jul 25, 2012we just replace 6500 with N7K, after migration there're some device (server,pc,printer) change its ip address configuration (subnet and gateway) by it self. can N7K did it?
View 6 Replies View RelatedCisco Routers :: RV180 - No Ability To Change IPSec Settings On Device
Nov 7, 2012I picked up this RV180 router because it has one of the fastest thru speeds of all the routers tested that I viewed on smallnetbuilder. That and it has the cisco name. I grew tired of purchasing wireless home routers every year after they fail. So far the thing is nice with one exception.
I have one device that is essential on my network called an airave. It is a small device similar to a wireless access point that works on springs voice network. The thing essentially makes a small cell tower inside your house and connects to the sprint network through an Ipsec vpn. I have not ability to change ipsec settings on the device on my end. The device works fine connected to the cable modem or to the old slow dlink. When I first connect the thing it works fine for about 5-10 minutes on the cisco. Then the thing loses connection and I lose my cell phone service. Just to test any port conflicts I made this the the DMZ with no luck.
I have also tried a firmware upgrade. I have not messed with any of the firewall settings or port forwarding since DMZ should in theory fix that. I have assigned the thing a fixed IP address but that does not seem to make a difference. It did not on my old router and is mostly just for my sanity and to facilitate the DMZ.
Cisco Firewall :: Mask DMZ Servers From Private Servers And LAN ASA 5520
Jun 11, 2013We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
Servers :: Connect 5 Servers Together To Create A Private Network?
Apr 16, 2011i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedCisco WAN :: 6513 Servers Unable To Communicate With DC-1 Servers
Mar 20, 2012I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies View RelatedCisco Routers :: RV082 Gateway To Gateway VPN Not Resolving Remote DynDns
Feb 14, 2013I've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.