Cisco AAA/Identity/Nac :: ACS 5.2 Migration Utility Fails On ACS 4.x Server ID?
Dec 21, 2010
I am working through the migration from ACS 4.1.4 on Windows Server 2003 to ACS 5.2 on the appliance. I have created the 4.1.4 migration server, installed the software and imported the data from our production ACS 4.1.4 box. I downloaded the migration utility from the 5.2 ACS server and am attempting to run on the 4.1.4 migration server. The question that fails is:
Enter ACS 4.x Server ID:
I do not know what this means and do not see anything on the 4.1.4 server that identifies the Server ID. I try localhost and it does not work and the 4.1.4 server is not registered in DNS or I would try that (and . are not valid characters in the ID so the IP does not work).
How have other people handled this question? Is there something that can identify the local server ID?
View 9 Replies
ADVERTISEMENT
Jul 26, 2012
I am trying to migrate an ACS 4.1.1(24) using the migraton tool to ACS 5.2. The tool is working OK. It migrates the users, groups, NDG, etc. and the reports are showing no errors.
The problem is with the Enable password of the users. The users in the ACS 4 have the TACACS+ Enable Password configured, but after the migration it appears empty in the ACS 5.
View 3 Replies
View Related
Oct 3, 2012
I don't seem to be able to find a migration utility for PIX rel 8.0.4 to ASA 8.6 is there one available will save a lot of time
View 1 Replies
View Related
Dec 26, 2011
we have some RV042 Routers with Firmware 1.3.12.x we would like to replace with the new V3 hardware.
We downloaded the migration utility 1.0.2.2, which crashes for at least one device.
The release notes for the utility are for version 1.0.2.8, where some crashes seems to be fixed, but where can we download this actual version?? I can only see the (older) 1.0.2.2..
View 3 Replies
View Related
Sep 18, 2011
I tried to use Migration Utility v 1.2.2.0 with configuration file from older unit having VPN tunnels and application is crashing with windows MFC error(on several computers, so it is not related to PC).Migration from V2 to V3 of configuration not having VPN tunnels went ok.
View 4 Replies
View Related
Aug 5, 2011
I upgraded my Linksys RV042 firmware to 1.3.12.19-tm and exported the config file, then tried to convert it using RV0xx_Migration_Utility_v1.0.2.2 in order to import it to a new Cisco RV042 (v3). The migration utility returns a config create fail message and fails to convert.
The LOG file ends with:
Get PORT_101 VLAN Group setting fail.
***log end***
how to make this work or how to move config file to v3?
View 1 Replies
View Related
Jul 21, 2011
After we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
View 21 Replies
View Related
May 19, 2013
I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.
View 11 Replies
View Related
Mar 22, 2011
what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
View 2 Replies
View Related
Jan 14, 2012
I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
View 1 Replies
View Related
Jun 11, 2012
If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?
whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?
View 1 Replies
View Related
Jun 12, 2013
I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
View 5 Replies
View Related
Jul 1, 2012
We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.
View 6 Replies
View Related
Jun 13, 2011
I'm planning migration from ACS 3.3 to a new machine, so I'm thinking about new Cisco ISE.I have the following question: ACS 3.3 acts as AAA RADIUS with LDAP repositoriy for wireless deployment, using PEAP-GTC. Is possible, with ISE, to use a different EAP method, such as PEAP-MsCHAPv2 or EAP-TTLS?
In ACS 5.X I think it's only supported PEAP-GTC and EAP-TLS when identity repository is LDAP. Is the same in Cisco ISE?
View 2 Replies
View Related
Oct 1, 2012
One of my customer wants to upgrade their Cisco ACS version from 4.0 to 5.3. The client has existing ACS version 4.0 windows on VM with two instance and need to upgrade to 5.3 Linux.As per my understanding following version are supporter to upgrade ACS to version 5.3 ACS 4.1.1.24ACS 4.1.4ACS 4.2.0.124ACS 4.2.1 but unfortunatlly there is running 4.0.I suggested to my client the upgradation for ACS and proposed this Upgrade lisence L-CSACS-53VMUP-K9 and CON-SAS-CSACS3V? how I can do the smooth deployment / Migration from 4.0 to 5.3 with (A/P)high availability.
View 1 Replies
View Related
May 9, 2011
we currently have 4x ACS 4.1 (1) build 23 windows based and we are going to migrate to ACS 5.2 appliance 11211.the first pair we are using simply local authentication for multiple vendor firewall and routers, with one custom radius vendor-specific attributes, with now she exec.the second pair we are using for wireless clients authentication through AD, with dynamic mapping.
in order to migrate what would be the most suitable migration, whether to use Migration utility or export those ACS objects and import them into the new ACS 5.2.
View 1 Replies
View Related
Jul 18, 2012
I'm using Cisco Secure ACS 4.2 for Windows to configure and authenticate VPNs external groups and users on VPN 3K concentrator.Now I'm migrating to AC System 5.3.I'm trying to configure the new system to do the same work.
I have configured a new access profile with all RADIUS attributes, than an access policy.IPSec Phase 1 completed successfully but VPN client doesn't procede with XAUTH.ACS View reports the correct rule and access service.
View 7 Replies
View Related
Mar 7, 2012
Is there a simple way to migrate shared dACL to group/user mappings from ACS 4 to ACS 5? After migration using the Migration tool provided by Cisco I get shared dACLs and also I get all my users/groups transfered but these shared dACLs are not mapped to groups or users as previously. I understand that in new ACS we do not apply authorization directly to users/groups, but then if I had in ACS 4.x a hundreds of groups and each of these groups had a dedicated dACL (shared) applied as authorization attribute now after migration to ACS 5 I have to create separate authorization profile for each of these groups which is a lot of manual work. So I'm asking for an easy automated way to migrate authorozation rules to new ACS version.
View 1 Replies
View Related
Nov 30, 2011
I cannot access WLSE, after migration from ACS 4.2 to ACS 5.2. WLSE was configured with tacacs+ management. In ACS 5.2 I've configured the optional custom attributes: groups = "System Admin"
View 2 Replies
View Related
Jun 7, 2011
I'm with problems to migrate the ACS 5.1 hardware to ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made a backup of the ACS hardware and copied the local disk vmware ACS.
When I start the restore process after a few minutes an error occurs:
UMA/admin# dir
Directory of disk:/
33293306 Jun 08 2011 16:51:38 bkp-production-110608-1433.tar.gpg
5862 Nov 07 2009 01:06:32 favicon.ico.1
16384 Jun 06 2011 17:54:34 lost+found/
[Code]....
View 4 Replies
View Related
Aug 11, 2011
We are using ACS v5.2.0.26.3 in 802.1X certificate based authentication. Now, when we added CRL functionality into ACS it fails in CRL validation and gives following error message:
LastErrorMessage=CRL PKI verification failed
Certificate Revocation list [URL]
We have installed root, device and server certificates from CA, but for management we are still using self-signed certificate.
Question is, which certificate is used when validating downloaded CRL file - one used for EAP-TLS or one used for management interface?
How I can check which certificate ACS server is using for CRL validation?
View 19 Replies
View Related
Dec 6, 2012
I try upgrade ACS 5.3.0.40 to new version 5.4.0.46. Everything looks ok:
ACS-machine/acsadmin# application upgrade ACS_5.4.0.46.tar.gz rep01 Do you want to save the current configuration ? (yes/no) [yes] ? Generating configuration. Saved the running configuration to startup successfully
% CARS Install application required post install reboot...
Broadcast message from root (pts/0) (Thu Dec 6 23:36:41 2012):
The system is going down for reboot NOW!
Application upgrade successful
But ACS machine (vmware instance) can't boot with this result: Volume group "smosvg" not found. (for details see attachment)
View 3 Replies
View Related
Jan 30, 2013
I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.
DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
Stopping ISE application before upgrade...
Running ISE Database upgrade...
% Application upgrade failed. check logs for more details.
View 2 Replies
View Related
Sep 11, 2011
I am trying to join my ACS 5.1 to my AD. In the External Identity Stores > Active Directory I have put in the AD administrator details and hit the test button and the test succeeds.
However, when I try to save changes it fails with an eror saying it can't connect to the LDAP server.
Error while configuring Active Directory:Error while configuring Active Directory:Unexpected LDAP Error Can't contact LDAP server due to unexpected configuration or network error.Please try the --verbose option or run 'adinfo --diag' to diagnose the problem.Join to domain 'Mydomain.local', zone 'null' failed.
I have done this lots of times and never had any issue once the test connection succeeds.
I've checked the time and timezones on both ACS and AD and they are the same.
View 7 Replies
View Related
Dec 6, 2010
I'm trying the csv file import and getting some errors.
010-12-07 14:23:47: File Format Validation Completed2010-12-07 14:23:47: Import Started
2010-12-07 14:23:47: Record number: 1, Host 01-02-03-04-05-06: Import Failed2010-12-07 14:23:47: null Import process failed for unexpected reason: Unknown error has accurred.2010-12-07 14:23:47: Import Completed With errors
-------- Summary --------Total Number of Records Processed:1Number of Records Failed:1Number of Records Imported:1---------- End ----------Please refresh the table to see the changes.
On some other tries I get null field or missing fields.
It actually creates the host, but on editing it I get the following message:
An unexpected error has occurred. To continue your work, reselect the option in the left navigation bar.If you continue to receive the unexpected error message, close your browser and log in to ACS again.If you still receive the unexpected error message, contact your system administrator or technical assistance.
MACAddress:String(64):Required,description:String(1024),"enabled:Boolean(true,false):Required",HostIdentityGroup:String(256),VLAN:String(256):Required,attr-Expiration Date:Date(yyyy-Mmm-dd)01-02-03-04-05-06,AAATest,true,,Guest,2010-Dec-08
View 3 Replies
View Related
Jan 21, 2013
I configured WiFi connection on Windows XP and Windows 7 with EAP-TLS (using Cisco WLC 7.0.235.3 and Cisco ACS 5.2.0.26.10). It is configured with computer authentication and computers certificates are autoenrolled from Microsoft PKI.It works well!
Now I configured Windows 8 with same configuration.First authentication works but if I manually disconnect and reconnect, I got this error on ACS: 22047 Principal username attribute is missing in client certificate.In EAP packets, we could see that Windows 8 sent a TLS session ticket but session was not resumed correctly by ACS..On ACS configuration, we checked this option "Enable EAP-TLS Session Resume" with session timeout "7200".
View 2 Replies
View Related
Jun 8, 2011
I have IAS set up on my organization's AD domain controller. Multiple policies set up for various authorization scenarios, authenticating based on Windows user groups and client IP, authorizing by passing "shell:priv-lvl=#" where #=desired privilege level. On my IOS devices I have:[code]
This identical configuration operates correctly on a Cisco 3825 and a Catalyst 4506. On the 24 port Cat 3560G PoE running 12.2SE (do not recall exact IOS version, but I know it is in that release train) that I am currently working on, every attempt to login via ssh passes authentication but fails authorization, displaying %Authorization Failed on the terminal and a message stating that "No appropriate privilege level found for user" in the debug statement from RADIUS.I have verified correct server addresses, correct source-interfaces, and that configs between the three devices match exactly with regards to aaa.
View 1 Replies
View Related
Jan 7, 2010
I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
View 7 Replies
View Related
Nov 13, 2012
I have a user named "testuser" and trying to authenticate from the xp computer but fails to authenticate. The ACS logs says that authentication failed, the user is in the local database but why it fails to authenticate?
I have cisco switch :
WS-C2960G-48TC-L 12.2(52)SE C2960-LANBASEK9-M
*Mar 8 04:03:55.030: AAA/BIND(00000029): Bind i/f
*Mar 8 04:03:55.173: %AUTHMGR-5-START: Starting 'dot1x' for client (782b.cbc9.a027) on Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428
*Mar 8 04:03:57.010: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed
[Code]....
View 7 Replies
View Related
Mar 22, 2011
i'm trying to configure acs 5.2 to LDAP external idenity store, when LDAP failes ACS 5.2 should use internal indenity store. I configured A sequence to use LDAP 1st then Internal and i shut off the link to the LDAP but ACS will not use internal, AAA Diagnostics keeps telling me that Cannot establish connection with LDAP server and will not use the internal store.
View 7 Replies
View Related
Apr 29, 2012
We're in the process of implementing an ISE 1.1 server for Guest Wireless Access / BYOD at our company and ran into an issue with authenticating from iPhones / iPads when the account is set with 'change password on next logon' (it's a local account created on the ISE server - not AD). It fails and displays 'unable to join network' on the iPhone. The ISE log shows a '5411: No response received in 120 seconds'. We're able to authenticate from Windows devices and are prompted to change the password during the authentication process. If we unchecked the 'change password' box we can authenticate from iPhones & iPads without any issue but we need to have a way for users to set their own password.
View 3 Replies
View Related
Oct 24, 2011
I set up LDAP store pointing to a Windows domain and am testing authenticating users via an ASA. In my LDAP config, its set for "Groups Objects refer to subjects" and I selected usernames in the drop down. I also added a a Global Group to the Directory groups tab in the LDAP store that I created.
Under my Access Polices, I created a rule that meets two condititons - coming from the ASA, and then I was able to select the group from the drop down box for my ldap domain. As a condition, it shows up as DomainName:External Groups. I set the permission to Permit Access.
Originally, I was failing authentication and I was receiving Subject Not Found in Store. I adjusted the Identity Sequence and now I receive a the following error:
15039: Selected Authorization Profile is Deny Access. So it must not be associating my account with the group with the Permit Access and using the Default Permissions.So it does match the correct Access Service, and Identity Store.
View 1 Replies
View Related
Aug 9, 2011
IP address of Primary had to be changed, to respond to a hardware failure of TACACS server with IP in many device configs.
Now the Secondary fails to respond to repeated "Deregister from Primary" requests, even after reload - apparently because it cannot reach the Primary at its old IP address.
Requesting Deregister in GUI generates pop-up that says, "This operation will deregister this ACS Instance from the Primary Instance. Management applications on this ACS instance will be restarted and you will be required to login again. After performing this operation
[code]....
View 1 Replies
View Related
