Cisco Firewall :: Migration Utility For PIX 515 8.0 To ASA5525 8.6
Oct 3, 2012I don't seem to be able to find a migration utility for PIX rel 8.0.4 to ASA 8.6 is there one available will save a lot of time
View 1 Replies
ADVERTISEMENT
Cisco Routers :: RV0xx Migration Utility Crashes?
Dec 26, 2011we have some RV042 Routers with Firmware 1.3.12.x we would like to replace with the new V3 hardware.
We downloaded the migration utility 1.0.2.2, which crashes for at least one device.
The release notes for the utility are for version 1.0.2.8, where some crashes seems to be fixed, but where can we download this actual version?? I can only see the (older) 1.0.2.2..
Cisco Routers :: RV082 V2 To V3 Migration Utility Fail?
Sep 18, 2011I tried to use Migration Utility v 1.2.2.0 with configuration file from older unit having VPN tunnels and application is crashing with windows MFC error(on several computers, so it is not related to PC).Migration from V2 to V3 of configuration not having VPN tunnels went ok.
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Migration Utility Fails On ACS 4.x Server ID?
Dec 21, 2010I am working through the migration from ACS 4.1.4 on Windows Server 2003 to ACS 5.2 on the appliance. I have created the 4.1.4 migration server, installed the software and imported the data from our production ACS 4.1.4 box. I downloaded the migration utility from the 5.2 ACS server and am attempting to run on the 4.1.4 migration server. The question that fails is:
Enter ACS 4.x Server ID:
I do not know what this means and do not see anything on the 4.1.4 server that identifies the Server ID. I try localhost and it does not work and the 4.1.4 server is not registered in DNS or I would try that (and . are not valid characters in the ID so the IP does not work).
How have other people handled this question? Is there something that can identify the local server ID?
Cisco AAA/Identity/Nac :: ACS 5.2 Migration Utility TACACS+ Enable Password
Jul 26, 2012I am trying to migrate an ACS 4.1.1(24) using the migraton tool to ACS 5.2. The tool is working OK. It migrates the users, groups, NDG, etc. and the reports are showing no errors.
The problem is with the Enable password of the users. The users in the ACS 4 have the TACACS+ Enable Password configured, but after the migration it appears empty in the ACS 5.
Cisco Routers :: RV042 Migration Utility Returns Config Create Fail Message
Aug 5, 2011I upgraded my Linksys RV042 firmware to 1.3.12.19-tm and exported the config file, then tried to convert it using RV0xx_Migration_Utility_v1.0.2.2 in order to import it to a new Cisco RV042 (v3). The migration utility returns a config create fail message and fails to convert.
The LOG file ends with:
Get PORT_101 VLAN Group setting fail.
***log end***
how to make this work or how to move config file to v3?
Cisco Firewall :: Does ASA5525-K9 Support Content Filtering
Jun 27, 2012I know the 5510 & 5520s support the CSC-SSM module for Content Filtering (Anti-Phishing, Anti Spam, URL filtering, Anti-Spyware & Antivirus), but what about content filtering for the ASA5525-K9.The problem that I have is that I need a firewall that supports up to 1 Gbps Maximum Firewall Throughput and to support 250 users with Content Filtering described above.I'm using the following doc for sizing and came across the ASA5525-K9 for 1 Gbps, but not sure about the Content filtering: url...
View 3 Replies View RelatedCisco Firewall :: ASA5525 / Got Warning Message When Configuring Nat On 8.3 And Later
Jun 11, 2013I'm configuring the nat on a ASA5525 running on 9.1.2 and got 2 questions, 1. Is the below overlap warning message normal and will not cause any issue? 2. Is there a simple way on 8.3 and later to fulfill the same functionality like 8.2 and earlier?
old config on 8.2 and earlier
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (dmz) 1 0.0.0.0 0.0.0.0 0 0
global (outside) 1 216.19.84.5
[code]....
Cisco Firewall :: ASA5525 Can Work Under ASDM7.0 (1) If ASA8.6 (1)2 Installed?
Feb 17, 2013If ASA5525 with ASA8.6(1)2 can be browsed using ASDM7.0(1), as currently i'm running ASDM6.6(1) if it will work, any document how to do the upgrade using GUI screen?
View 8 Replies View RelatedCisco Firewall :: Secondary ASA5525 Interface Flap When Write Standby
May 23, 2013i never see this before, but on newly purchased just configured firewall.when i do wrtie standby.All interfaces on standby unit flaps.is it some IOS bug? my firewalls are [code] what could be the reason? FYI i am using LAN base failover and not doing any statful fail-over.
View 3 Replies View RelatedCisco Firewall :: ASA5525-X / Accessing IPs Of Public Servers From Inside Interface?
Oct 30, 2012Got an ASA5525-X with 8.6 release. We have an inside interface (10.11.1.0/24) and a DMZ interface (10.254.1.0/24). On that DMZ interface theres an SMTP server; by using the Public server feature in ASDM we created a rule so we have mapped the 10.254.1.29 internal ip to an external ip 217.x.x.x Everything is fine; working ok, but for several reasons we need to access the public ip 217.x.x.x from an inside ip (10.11.1.10). I tried to do it by creating an exemption for the dynamic nat; if i don't do that i have a 'deny ip spoof from...' message rolling on my syslogs.Seems to do the trick.....but only for pings! i ping the public ip from the inside ip, and got the reply from the internal ip on the DMZ. But if i want to telnet port 25 from inside to public; its not working.
View 7 Replies View RelatedCisco Firewall :: PIX To ASA 8.3 Migration?
Mar 8, 2011As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.
Cisco Firewall :: ASA 8.0 Configuration Migration To 8.6
Feb 12, 2013I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
View 5 Replies View RelatedCisco Firewall :: Migration PIX 515 8.0(3) To ASA 5525-X
May 28, 2012I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?
Cisco Firewall :: Migration Error Upgrading To ASA 8.4.4
Oct 25, 2012I was trying to upgrade an ASA to from 8.2.4 to 8.4.4, and I began receiving the following migration errors (the IP addresses have been changed to protect the innocent):
ERROR: MIGRATION: The following ACE is partially/not migrated to Real IP, as it could result in more permissive policy. Please manually migrate this ACE. permit esp host 1.1.1.1 host 2.2.2.2
I got a TON of these, in fact the migration, and these errors ran for over 24 hours before I gave up, powercycled the unit and forced 8.2.4 to boot through ROMMON. This was a secondary unit, that's why I let it go this long.
What I don't understand is that we do not have anything in the configuration for ESP.
Cisco Firewall :: PIX 515E To ASA5515 Migration?
Aug 26, 2012Looking at migrating from the following:
PIX-515EPIX Security Appliance Software Version 8.0(4)Device Manager Version 6.1(5)51
to
ASA5515Cisco Adaptive Security Appliance Software Version 8.6(1)Device Manager Version 6.6(1)
Is this migration directly supported, or do I need to downgrade first?
Cisco Firewall :: ASA-AC-M-5520 Migration To ASA-AC-M-5585?
Jan 23, 2013I have ASA-AC-M-5520, can we migrate the license to ASA-AC-M-5585
View 1 Replies View RelatedCisco Firewall :: ASA 8.3 - Migration Changes Hosts To Objects?
Sep 24, 2012I'm testing upgrading an ASA from 8.2.5 to 8.4.4. During the the upgrade, it change all of my ACL host entries to objects. But I noticed that the keyword "host" is still a valid option when creating an ACL.
I'm trying to understand why this change is made during the migration.
Cisco Firewall :: ASA 5550 To ASA 5555-X Migration
Apr 23, 2013I am about to carry out a migration from ASA 5550 to ASA 5555-X, however I cannot find any detailed document or reliable tool for this migration.
View 4 Replies View RelatedCisco Firewall :: PIX515 To ASA5510 8.4(5) Migration?
Dec 18, 2012We're migrating as mentioned in the subject and this new format is quite a departure from previous iOS versions so I thought I'd post the configs of the PIX and the ASA and ask if someone is willing to compare them and verify that it is correct and should be basically plug and play. The xxx.xxx.xxx are outside IP addresses and the yyy.yyy.yyy are inside addresses. .
Existing PIX config
PIX Version 6.3(4)
interface ethernet0 100full
[Code]......
Cisco Firewall :: Config Migration From ASA5540 To An ASA5545-X?
Jan 22, 2013Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
They are going to be using it as a VPN concentrator primarily.
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X? Or if they upgrade to 9,0(1) or higher, then they should be the same?
Cisco Firewall :: ISP Migration With ASA 5510 And External Router?
Nov 26, 2012My company (in Healthcare) is going to be changing ISPs for our internet connectivity, and with this change comes a new external IP block. So I need a scheme to migrate over all of my existing VPN tunnels and other items over to new IP addresses. We do have an external router which I plan on doing a route-map to handle which traffic the ISP should go to based on IP. My big concern is for the ASA 5510. Can I setup a second outside interface on the new IP range? Then migrate my VPN tunnels over one-by-one? A drop-dead cutover date is just not possible with all of the external companies that I have to contact to get VPN tunnels updated with. If it's not possible, we have in our budget to get another 5510 next year as a redundant unit. I may be able to get that early and just migrate from one firewall to another.
View 3 Replies View RelatedCisco Firewall :: ASA 8.3 Real Ip Address Automatic Migration?
Mar 23, 2011in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
Cisco Firewall :: Recreate Objects In Groups After Migration To 8.3?
Feb 22, 2012when I migrated the ASA config from 8.2 to 8.3, in all groups the group members has been replaced by the IP address object. However, the "name" for this object has been migrated, but there is the "object network name" configuration missing.
What I can do now is that I can open the new created object in the ASDM, search for the object with this IP address and then enter the object name I had before. When I apply the config, ASDM then creates the object and replaces all affected objects in all groups, by replacing the object group memeber "network-object host hostname" with "network-object object hostname".
Do you know if there exists an automated way, which checks all the groups for members "network-object host", creates the "object network" and replaces the "network-object hosts" with "network-object object" within the group? As long we have a lot of groups which contains partially > 50 members?
Cisco Firewall :: ASA 1000V And ASA 5500 Migration Between Firewalls
Jul 8, 2012We currently have redundant FWSM's and are planning a migration to standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and are looking at the Nexus 1000V. I understand the Nexus 1000V and VSG architecture and implementation, and I do understand that the ASA 1000V is designed for cloud environments. But I do have one question about the ASA 1000V.
Is it possible for an ASA 5500 series firewall to be replaced by an ASA 1000V? Basically, can an ASA 1000V be a sole firewall solution, or are ASA 5500's still needed? Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?
Cisco VPN :: ASA5525 - What Does Other Mean In VPN Licensing
Mar 21, 2013My current ASA 5525-X is licensed with Anyconnect premium = 2 and 750 "Other VPN" What does other mean? Also does this mean that only two clients with Anyconnect can use the ASA for VPN? Or is Premium different than Anyconnect alone?
View 5 Replies View RelatedCisco Firewall :: PIX To ASA5520 Migration Some Services Aren't Working
May 20, 2013I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
-INSIDE to DMZ is working fine. (through ASA)
-INSIDE to OUTSIDE is working fine. (through ASA)
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
object-group network inside_subnet_all network-object object inside_subnet_a network-object object inside_subnet_b network-object object inside_subnet_c network-object object inside_subnet_d network-object object inside_subnet_e network-object object inside_subnet_f network-object object inside_subnet_g network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip
Cisco Firewall :: ASA 5510 / ASA 8.3 Migration - Expanded Access List
Apr 24, 2011I have just upgraded a ASA5510 from 8.2 to 8.3 using migration tool.All seemed to go well, still double checking the config as this is a bench test of upgrade prior to filed upgrades.
Anyway one thing that is slightly frustrating is that the migration has expanded all of my access-lists, so we maybe had 10 lines of config relating to access-lists based on access-groups, now we have hundreds of lines.On ASDM this is bad enough but on CLI with show run its a bit of a bind.
Is there any way to un-expand the access list or do I simply delete and start again using my access groups.
Cisco VPN :: ASA5525-X - When Transfer File Get Error
Oct 16, 2012IPsec VPN configured between ASA5525-X and Linksys RV042 ,While transfering some exe from ASA5525-X side to Linksys RV042 side over VPN hash-sum of this file changes, so, when you open transferred file, you have an error message "File is corrupted". If you try to transfer file from Linksys side, hash-sum is ok. Also, work with oracle application is interrupted because of unknown reason. IPsec works only if using router instead of ASA.
View 2 Replies View RelatedCisco Firewall :: Configuration Migration From ASA 5540 Running 7.2 To 5525X Running 9.1
May 7, 2013I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedCisco :: Migration From WCS (7.0.230..0) To NCS
Aug 15, 2012I've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?
View 1 Replies View RelatedCisco Switches :: ESW 520 24 No HTTP Configuration Utility
May 26, 2011I need to confure 3 ESW-520, 2 24 ports and 1 48 ports, connected in etherlink on the same vlan. One of the 24 ports and the 48 ports works perfectly, the other 24 ports it working, i can use it as a flat switch, i can also access from the console, but i can't access from the http configuration utility. I upgrade the firmware, and set the vlan 1, the one i'm using as the only management, but i can't access ti the default ip 192.168.10.2. It's the switch broken or i'm making some error?
View 2 Replies View RelatedCisco :: WAP4410N Can't Access Configuration Utility
Jul 8, 2012I have a WAP4410N and I got the internet working nicely, but I can't access the web-based configuration utility. The manual says the address is 192.168.1.245, but Firefox (and other browsers) can't open it. I have tried pressing the reset button, but that did not solve the issue.
View 1 Replies View Related
