My current ASA 5525-X is licensed with Anyconnect premium = 2 and 750 "Other VPN" What does other mean? Also does this mean that only two clients with Anyconnect can use the ASA for VPN? Or is Premium different than Anyconnect alone?
View 5 RepliesI don't seem to be able to find a migration utility for PIX rel 8.0.4 to ASA 8.6 is there one available will save a lot of time
View 1 Replies View RelatedIPsec VPN configured between ASA5525-X and Linksys RV042 ,While transfering some exe from ASA5525-X side to Linksys RV042 side over VPN hash-sum of this file changes, so, when you open transferred file, you have an error message "File is corrupted". If you try to transfer file from Linksys side, hash-sum is ok. Also, work with oracle application is interrupted because of unknown reason. IPsec works only if using router instead of ASA.
View 2 Replies View RelatedI know the 5510 & 5520s support the CSC-SSM module for Content Filtering (Anti-Phishing, Anti Spam, URL filtering, Anti-Spyware & Antivirus), but what about content filtering for the ASA5525-K9.The problem that I have is that I need a firewall that supports up to 1 Gbps Maximum Firewall Throughput and to support 250 users with Content Filtering described above.I'm using the following doc for sizing and came across the ASA5525-K9 for 1 Gbps, but not sure about the Content filtering: url...
View 3 Replies View RelatedI'm configuring the nat on a ASA5525 running on 9.1.2 and got 2 questions, 1. Is the below overlap warning message normal and will not cause any issue? 2. Is there a simple way on 8.3 and later to fulfill the same functionality like 8.2 and earlier?
old config on 8.2 and earlier
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (dmz) 1 0.0.0.0 0.0.0.0 0 0
global (outside) 1 216.19.84.5
[code]....
If ASA5525 with ASA8.6(1)2 can be browsed using ASDM7.0(1), as currently i'm running ASDM6.6(1) if it will work, any document how to do the upgrade using GUI screen?
View 8 Replies View Relatedi never see this before, but on newly purchased just configured firewall.when i do wrtie standby.All interfaces on standby unit flaps.is it some IOS bug? my firewalls are [code] what could be the reason? FYI i am using LAN base failover and not doing any statful fail-over.
View 3 Replies View RelatedGot an ASA5525-X with 8.6 release. We have an inside interface (10.11.1.0/24) and a DMZ interface (10.254.1.0/24). On that DMZ interface theres an SMTP server; by using the Public server feature in ASDM we created a rule so we have mapped the 10.254.1.29 internal ip to an external ip 217.x.x.x Everything is fine; working ok, but for several reasons we need to access the public ip 217.x.x.x from an inside ip (10.11.1.10). I tried to do it by creating an exemption for the dynamic nat; if i don't do that i have a 'deny ip spoof from...' message rolling on my syslogs.Seems to do the trick.....but only for pings! i ping the public ip from the inside ip, and got the reply from the internal ip on the DMZ. But if i want to telnet port 25 from inside to public; its not working.
View 7 Replies View RelatedWe have a CISCO 2921/K9 which has the securityk9 feature set (reflects Permanent under show version)
I thought that included SSL VPN, but doing a "show license all" it doesn't reflect that:
StoreIndex: 4 Feature: SSL_VPN Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
[Code].....
I have a customer that purchased an LMS 3.0 package and later upgraded it to LMS 3.2 using same license for 300 devices.Now the customer wants to upgrade to LMS 4.1 and is asking if they can get a similar free upgrade as before, especially since their current LMS is covered under an SP Base contract.
Do you know if the SP Base contract will qualify them for this? I have tried discussing it with a TAC licensing Engineer and the Local Accounts team both have not given me a solid answer.
I currently have an ASA 5510, and a ASA 5505 both configured with VPN and TLS licensing.I would like to migrate to a pair of ASA 5525-X, would it be possible to transfer the licensing or would I need to re-purchase?
View 4 Replies View RelatedWe have the ASA firewalls in our environment - two 5510's and one 5520.Our 5510's are currently used in our production environment and the 5520 is our firewall for pre-production and support personnel. My question is about the AnyConnect VPN licenses we have. Currently we have 100 seats for AnyConnect on our production ASA's, but we'd like to see if we can move half of these to the 5520 ASA?
View 1 Replies View RelatedI bought a Cisco ASA 5510 (P/N: ASA5510-BUN-K9) and i would like to know if i have to buy some license,What i mean is, for the basics, it still being necessary aquire some license?
View 3 Replies View Relatedwe have a customer with 2 x ASA5510-SEC-BUN-K9 running in an active/active HA mode. On the primary ASA he has 25 SSL premium licenses, but on the secondary ASA he has only 10 SSL licenses. Is there a need that both ASA´s has the same kind of licenses?
View 5 Replies View RelatedDo I need to obtain license keys/files when upgrading a 2851 to IOS 15.x? I'm getting a bit confused seeing the documentation that says 1) IOS has gone to a universal image and 2) that feature sets are unlocked based on the installed license.
I was able to download a feature specific IOS image for the 2851 and it did not bother me about licensing upon boot up.
I read one post on here that stated 2800/3800 series (G1) do not have to worry about the licensing piece and that it's just 2900/3900 series (G2) hardware that require it.
I have registered the license purchased for the ASA 5585X appliances and have received the following listed as features.
> Failover : Enabled > Encryption-DES : Enabled > Encryption-3DES-AES : Enabled > Security Contexts : 20 > GTP/GPRS : Disabled > AnyConnect Premium Peers : Default > Other VPN Peers : Default > Advanced Endpoint Assessment : Disabled > AnyConnect for Mobile : Disabled > AnyConnect for Cisco VPN Phone : Disabled > Shared License : Disabled > UC Phone Proxy Sessions : Default > Total UC Proxy Sessions : Default > AnyConnect Essentials : Disabled > Botnet Traffic Filter : Disabled > Intercompany Media Engine : Disabled > 10GE I/O Plus : Disabled(code)
I am in need of some information regarding licesnes on the ASA 5505.I have a client who is connecting their main office to a DR site via a site-to-site VPN. I understand that the standard license for the ASA 5505 is for 10 clients.Does the site-to-site connection consume one of these licenses?Does each endpoint communicating over the site-to-site VPN consume one license also?For example, if I have the site-to-site VPN and 10 servers on each side, would that mean that I need 21 licenses; 1 for the VPN and 20 for each server on each side?
View 4 Replies View RelatedI've got the following licenses installed.
LMS4.0-750 devices.
If I now buy a software support contract for the above will that also entitle me to a free upgrade to LMS 4.1-750 or will I still need to buy a upgrade license.
We have two pairs of ACE 4710s, one pair running A3(2.4) and the other pair A3(2.0). We plan to upgarde the second pair so that they are running the same image as the first pair (we know they are not the latest, but this is the first step in a larger rollout plan, and to aid some troublshooting for a major issue we are seeing.)
I have details of the upgrade steps, but my question is with regards to the licenses which are now enforced after (2.0). We currently have the following on the first pair, but are these part of the default licenses for (2.4) or would we need to purchase these as well?
ACE-AP-500M-LIC
ACE-AP-C-100-LIC
ACE-AP-OPT-50-K9
ACE-AP-SSL-05k-K9
I have recently purchased ASR1002-RP1-ESP5 with 2 x 4K Broadband licenses to be used as LNS. Cisco have sent me PAK files for the licenses however when I try to enter the licenses into the device I get an error message saying that Licensing is not supported on this platform.
Any experience with this platform and installation of the broadband licenses?
When I spoke to Cisco TAC they told me that for this particular model the licensing is on "trust" basis where you buy license and do not install it on the actual router - similar to what 7200 used to do.
01. I have one customer unit C1121 ACS system shipped with version 5.1. The customer buy the base license and large deployment license along with the purchase.
02. Fact is i have manually upgrade the system to version 5.3.0.40, and applying a trial license for it for administering the appliance.
a. If i now using the purchased base license and large deployment PAK to activate the system, would it still valid for me to continue using Version 5.3.0.40?
I have a customer who has purchased a Cisco 5510 and after we received it and all the necessary VPN, 3DES etc. licensing for it, then informed us that they order 2 T1 lines so they can have Internet failover.
My question is: Does this require an additional specialized license from Cisco in order to enable and configure it? And if so, what that part number is?
I am just getting more confused the more I try to work it out. Not sure if this goes in the IP Telephony section or here. We have an ASA 5510 with the base license. We are needing to install IP Phones at remote workers homes, and I understand there are Cisco IP phones which have VPN clients built in to allow a tunnel to the central private network. IT appears that you can only use Any connect VPN for this, ans I am trying to work out what licensing upgrade we need to apply to the ASA, as the two Any connect licenses you get free on the ASA is not enough.
This is the phone we are looking to get; {URL} . What I want to know is will the Any connect Essentials license work with these IP phones? When I do a show version,
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 50
Inside Hosts : Unlimited
Failover : Disabled
[code].....
This platform has a Base license. It shows "Any Connect for Linksys phone : Disabled", is this the same for Cisco IP Phones? Is this the specific licensing type I should be looking to get for Any connect on IP phones or will Essentials do?
so I look up ASA5505 licensing and for VLAN support see: 3 (no trunking support)/20 (with trunking support)*
I need 3 VLANs...inside, outside, and DMZ..but when it is creating the third (DMZ) it says I am only allowed to have 2 VLANs and can only create the third if its set to not forward traffic. ?
I am pretty new to cisco and the learning community forums is truely one of a kind.Actually, I work on a company which deals the Cisco products, Routers/Firewalls/Switches and stuffs. I am sure you get the picture. What confuses me is the product licensing of ASA5500. To be more specific, we are proposing certain things. And that came with the product pricing sets and all. But I amn't having a clear picture on ASA 5500 Strong Encryption License (3DES/AES). Does that come inbuilt(free) or should there be any pricing behind that!?
View 5 Replies View RelatedIf customer buys without cube license, I assume I have to purchase and actually apply the license. Is that correct?
View 2 Replies View RelatedI have a 4 member stack of 3750's. We would like to take advantage of wccp and we understand that we will need to upgrade our switch licensing from IPBase to IPServices. My question is do we need to pay for a license for each member in the stack or does one IPServices license upgrade cover the whole stack?
WS-C3750G-48PS
WS-C3750G-48TSWS-C3750G-48TSWS-C3750G-48TS
I am looking to deploy a cloud/borderless network solution and cannot get my head around how the licenses (AnyConnect Mobile and essentials) will be applied in a multiple context deployment. Any correct documentation.
View 1 Replies View RelatedPrior to version 8.4(1) Cisco called their licensing name for SSL/VPN users AnyConnect Premium SSL VPN and currently the new name of the licensing is simply AnyConnect Premium. Also, the IOS display name for the amount of SSL/VPN users enabled via your licensing (ex. 2, 10, 25, 50, ...) by running a 'show activation-key' was changed from SSL VPN Peers to AnyConnect Premium Peers.With that said, my question is if the license for upgrading 10 users to 25 users (L-ASA-SSL-10-25= - ASA 5500 SSL VPN 10 to 25 Premium User Upgrade License) on an ASA prior to 8.4(1) and an ASA with 8.4(1) is still valid and the correct part number to peform these upgrades for both ASAs. The description of this part number is throwing me off because it says SSL VPN to Premium User, which was the name prior to 8.4(1). I could not locate any documentation regarding this part number or upgrading 10 users to 25 users for both ASAs.
View 4 Replies View RelatedI am setting up an ASA5505 to allow a VPN with certificate from AnyConnect Secure Mobility Client (iPad)However I get a "No License" message back from the ASA, on the iPad - Anyconnect.I remember reading the ASA5505 came with two licenses.
View 8 Replies View RelatedWe have just purchased and installed the L3 daughter card for our 5548UPs and have also installed the L3 Enterprise Services pkg. The problem is, I cannot enable the EIGRP feature even though we have the Ent Svc lic. After doing a little more research, I see that the Lan Base lic is required to enable the L3 card and many of the L3 features (the card is currently in an "offline" state).
From what I have read on this board, the Lan Base lic is a free license that should be included with the L3 daughter card -- however, Cisco licensing will not issue me that license without a sales order (even though a Nexus engineer said it was included, the licensing group will not issue with an official sales order). Well, our vendor ordered the card and the Ent Svcs lic but for some reason we were never sent a PAK for the LAN Base lic.
A customer is currently running a 5520 ASA pair in active/standby HA mode. The devices also have an IPS module, one of them using a temporary (60-day) license. So, right now, licensing is identical on both ASAs and HA is operational.
The question is what exactly will happen after 60 days, once the temporary license expires? Does HA shutdown completely once it's determined that the licensing isn't a 100% match any longer, or does it just cripple one feature (such as the IPS module)?
The customer is balking at purchasing SMARTnet for the 2nd ASA, so I need to explain exactly what is going to happen (if anything) once the license on the 2nd ASA drops off...
I currently have a 3560G switch running c3560-ipservicesk9-mz.122-58.SE2 I have a spare 3560 V2 switch I want to configure and have ready in case of a failure. This spare switch is running c3560-ipbasek9-mz.122-55.SE5 My plan was to pull the IOS image from the current switch and upload it to the spare that way I have an "idnetical" switch. From what I have read, there are some feature differences between "ipbase" and "ipservices". However, when I run the show license command on the production switch, I get an unrecongnized command error. So that throws into my confusion as if its running an ipservices image, shouldn't it have a license file?
View 4 Replies View Related