I am looking to deploy a cloud/borderless network solution and cannot get my head around how the licenses (AnyConnect Mobile and essentials) will be applied in a multiple context deployment. Any correct documentation.
I just learned that the licensing structure for the ASAs is changing, but I don't have any details. We have roughly 30 ASAs (from 5505s to 5585s). If there's a licensing change, I need to do an impact assessment and plan accordingly.
I have a question with regard to setting up the ID firewall on the ASA 5585 in a single forest, multiple domain windows network.Currently I have a semi-operational IDF at the top level but can't find users on the lower other domains, here is the setup:I have 3 domains.
[URL]
Both domains have a two way parent-child trust and I can look for users in AD Users/Computer on both domains. I initially setup the ASA to look at domain1.test.com using an LDAP aaa-server per the IDF instructions, and then proceeded to configure the ad-agent. I installed the adagent on the domain1.test.com domain controller configured the settings on that system and had no problem adding users to the firewall and getting functionality within domain1. I looked to see if I could see domain 2 and domain 3 users and found none. I went ahead and added the domain2 system to the adagent on the DC and the system says that it is up, but when I search for users is not pulling them from domain2. Instead, it shows domain1 users as domain2user1. I also configured another adserver in the ASA to search ldap on domain 2 to no avail.The cisco documentation states the following:•Before you configure even a single domain controller machine using the adacfg dc create command, ensure that the AD Agent machine is first joined to a domain (for example, domain J) that has a trust relationship with each and every domain (for example, domain D[i]) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine). Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.Reading that it sounds like it should just work. I had everything properly configured before I installed the adagent, but I'm guessing that there is a chance that you can't have the adagent on the top level DC and get to communicate with the lower level domains.
Does the 5585X supports BGP ? What if someone wants to use Antivirus + IPS feature in that . I have seen IPS modules for 5585X but looks like the antivirus module is not avaliable for 5585X
I bought a Cisco ASA 5510 (P/N: ASA5510-BUN-K9) and i would like to know if i have to buy some license,What i mean is, for the basics, it still being necessary aquire some license?
we have a customer with 2 x ASA5510-SEC-BUN-K9 running in an active/active HA mode. On the primary ASA he has 25 SSL premium licenses, but on the secondary ASA he has only 10 SSL licenses. Is there a need that both ASA´s has the same kind of licenses?
I want to configure Qos for 2 diffrent Vlan 2 , each vlan for 2 mbps bandwidth .(VLAN details VLAN 10 (10.10.x.x /24) and vlan 20(20.20.x.x/24) Is any difference regarding initials configuration B/w ASA 5520 and 5585
We are working for a client move from PIX 525 to ASA 5585-X, SSP10. This is a production environment and very critical migration. What are the gotchas which we should be aware off?
We have installed 5585-x in active/active mode with transparent firewall. We have created two virtual sersors for vs1 and vs2 in IPS module and linked with ASA context C1(vs1), C2(vs2) and admin(vs0).
As firewall is working in transparent mode, we have bridge IP address for context C1 10.1.1.1 and for context C2 10.2.2.1.
I have added default routed for context C1 10.1.1.2 .It is in the outside of asa and SVI on switch.For the other context C2 10.2.2.2.
IP address range for the IPS module and what should be the gateway for IPS module.AS the traffic is coming from outside and going to inside interface of ASA.
I have a pair of ASA 5585 configured with 2 contexts, C1 & C2, C1 is active on ASA-1 & C2 is active on ASA-2 i did failover test, ping was initiated to host residing behind ASA-1 in context C1 i powered of ASA-1 then both context became active on ASA-2, however during this failover.i saw 4 ping packets drop..
I am in need of some information regarding licesnes on the ASA 5505.I have a client who is connecting their main office to a DR site via a site-to-site VPN. I understand that the standard license for the ASA 5505 is for 10 clients.Does the site-to-site connection consume one of these licenses?Does each endpoint communicating over the site-to-site VPN consume one license also?For example, if I have the site-to-site VPN and 10 servers on each side, would that mean that I need 21 licenses; 1 for the VPN and 20 for each server on each side?
I have a customer who has purchased a Cisco 5510 and after we received it and all the necessary VPN, 3DES etc. licensing for it, then informed us that they order 2 T1 lines so they can have Internet failover.
My question is: Does this require an additional specialized license from Cisco in order to enable and configure it? And if so, what that part number is?
so I look up ASA5505 licensing and for VLAN support see: 3 (no trunking support)/20 (with trunking support)*
I need 3 VLANs...inside, outside, and DMZ..but when it is creating the third (DMZ) it says I am only allowed to have 2 VLANs and can only create the third if its set to not forward traffic. ?
I am pretty new to cisco and the learning community forums is truely one of a kind.Actually, I work on a company which deals the Cisco products, Routers/Firewalls/Switches and stuffs. I am sure you get the picture. What confuses me is the product licensing of ASA5500. To be more specific, we are proposing certain things. And that came with the product pricing sets and all. But I amn't having a clear picture on ASA 5500 Strong Encryption License (3DES/AES). Does that come inbuilt(free) or should there be any pricing behind that!?
I have a new 5585x with only basic ip information on it. I can't get the ASDM to load from any interface. Browser just says cannot load page. I upgraded to 9.1 and ASDM 7.11-52. (Also did not work before I upgraded) I can ping the managment 0 interface and can tftp data to and from it. Also unable to telnet to the management interface. [code]
Any document in which is specified who may ACE rules are supported in an ASA5585-SSP-20?I need to compare this an other several specification versus a FWSM. I found the information for the module, but not for the ASA 5585-X..In the data sheet this information is not specified.
I am currently working with ASA 5585 with several contexts. What is the percentage of the CPU used per context. I already have the opportunity to do it for the whole ASA (context admin) using the SNMP mib CISCO-PROCES but, unfortunalty, this mib doesn't allow us to know the percentage of used CPU per context.
I was able to know the number of core used per context but not the percentage of the CPU used.
Shared licensing of ASA?I have 2 ASA 5585 in cluster and I have to Implement SSL / VPN license My question:Since I have a cluster in 8.3 version, can I use only one license VPN / SSL for two, without necessarily implement the Shared Server licenses and participant.
A customer is currently running a 5520 ASA pair in active/standby HA mode. The devices also have an IPS module, one of them using a temporary (60-day) license. So, right now, licensing is identical on both ASAs and HA is operational.
The question is what exactly will happen after 60 days, once the temporary license expires? Does HA shutdown completely once it's determined that the licensing isn't a 100% match any longer, or does it just cripple one feature (such as the IPS module)?
The customer is balking at purchasing SMARTnet for the 2nd ASA, so I need to explain exactly what is going to happen (if anything) once the license on the 2nd ASA drops off...
I just upgraded my ASA 5585 cluster from 8.2 to 8.4. I also upgraded the asdm .bin from 6.35 to 6.43. after rebooter the cluster, I try to access it with ASDM installed on my computer but it blocked at 17%.I tried to access [URL] but I just an error (with IE & FF) [code] What did I miss in the ocnfiguration ? I precise that I never used the http page, I already had the ASDM installed from another ASA.
ASA design. I have two Cisco ASA 5585 which are connecting to two Nexus 7K. I looked at one design and it seems I can make Redundant interfaces on ASA and put two physical interfaces (Link1-1/1-2) into it however the down side I can see is it will utilize one link out of 4 at one time. As per my understanding if I make redundant interface on ASA 1 and put 1-1/1-2 into it only one link would be active at one time. This will force Nexus2 to send all traffic to Nexus 1 in order to reach ASA. Ideally I want a solution where both switches could send traffic straight to Active Firewall and incase of failure both links to standby firewall.
I have a problem whit the configuration of a Firewall ASA 5585 whit the BVI Interface and transparent Firewall, I have 2 VLAN that i want to interconnect.
The problem is whit the configuration of VLAN. The traffic does not cross the FW.
I was wondering if it is needed to license the IPsec VPN clients in the ASA5500 firewalls...I know that you have license the SSL VPN peers (AnyConnect). I am almost sure that for the IPsec you don't have to.
I have an ASA 5585 in transparent mode, multi-context. It seems that the option to configure a BVI in one of the traffic contexts isn't there. In other words, while I see the option to configure a bridge group interface in the admin context, no such option comes up in the traffic context. [CODE]....
Is it possible to have context in transperant mode and routed mode. Means if i need three context then 2 of them is in routed mode and one of them is in transperant mode. If yes then how, i can 't find this info in cisco website.?I am havin 5585-x and asa version 8.4?
