Cisco Firewall :: Recreate Objects In Groups After Migration To 8.3?

Feb 22, 2012

when I migrated the ASA config from 8.2 to 8.3, in all groups the group members has been replaced by the IP address object. However, the "name" for this object has been migrated, but there is the "object network name" configuration missing.
 
What I can do now is that I can open the new created object in the ASDM, search for the object with this IP address and then enter the object name I had before. When I apply the config, ASDM then creates the object and replaces all affected objects in all groups, by replacing the object group memeber "network-object host hostname" with "network-object object hostname".
 
Do you know if there exists an automated way, which checks all the groups for members "network-object host", creates the "object network" and replaces the "network-object hosts" with "network-object object" within the group? As long we have a lot of groups which contains partially > 50 members?

View 2 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 8.3 - Migration Changes Hosts To Objects?

Sep 24, 2012

I'm testing upgrading an ASA from 8.2.5 to 8.4.4.  During the the upgrade, it change all of my ACL host entries to objects.  But I noticed that the keyword "host" is still a valid option when creating an ACL.
 
I'm trying to understand why this change is made during the migration.

View 3 Replies View Related

Cisco :: Named Objects Or Object Groups In ASR 1000s?

Mar 5, 2012

Any way of doing named objects or object groups for ACLs on the ASRs? (1000 series in this case.) I'm setting up an ASR with a zone-based firewall and writing out all the addresses, ports and protocols for the ACLs associated with the various zones is creating huge, unwieldy ACLs in the config.

View 11 Replies View Related

Cisco Firewall :: 5520 Recreate Logical Interfaces For Each Physical Interface

Nov 29, 2012

We have to enable FIPS 140-2 on our ASA5520's for all our IPSEC VPN connections.   We currently have failover on our 5520's. I found a lot of information out there but some seems to conflict one another.What are the things I need to look out for - caveats? Does the clients that connect to the VPN had to use different clients once the FIPS was enabled.Do we need to recreate logical interfaces for each physical interface we have?

View 1 Replies View Related

Cisco Firewall :: How Many Objects Can ASA 8.3(2) Support

Jun 22, 2011

We are currently running 8.3(2) and I'm just wondering how many network/host objects the device can support? and how big can an access-l get?

View 1 Replies View Related

Cisco Firewall :: ASA5505 NAT For Group Of Objects

Oct 4, 2010

My ASA5505 has an external address of x.x.x.13. We have got another 2 spare ip addresses: x.x.x.10 and x.x.x.11.We also have 2 internal hosts, which we need to provide with internet access using NAT. y.y.y.146 and y.y.y.70.
 
We recently updated our ASA to software version 8.3(1). I was thinking that I could do it using network objects and groups, but didn't understand quite good how this should be done.
 
The goal is to set up ASA in the way, that if either of the abovementioned 2 hosts will connect to the internet, it needs take one of 2 external addresses. All other hosts should use PAT through x.x.x.13.

View 21 Replies View Related

Cisco Firewall :: ASA 5520 Adding Network Objects Via CLI

Nov 3, 2011

I'm working with ASA 5520s. how to add network objects via CLI. I know I could easily do it using ASDM, but I like to learn the hardway first. How do I add the subnet mask for a network object when creating via CLI? [code] That sets up the hosts with IP addresses, but how do I add the subnet mask?

View 2 Replies View Related

Cisco Firewall :: ASA 5520 - Creating Host Objects Via CLI

Nov 3, 2011

I am trying to create host objects that I'll then add to network-object groups for use in ACL/ACEs.When I try to create a host I am having trouble adding the IP address.I then get an error saying the host name must start and end with letters or numbers and only contain letters or numbers. What do I need to do to create hosts from CLI?

View 2 Replies View Related

Cisco Firewall :: Can't Create Network Objects On ASA 5505

May 17, 2011

I have a customer an exisiting 5505 which connects to multiple sites for a site-to-site VPN.  This firewall was not installed by myself originally I have just been asked to take a look now.The situation is that we now need to edit one of the existing site-to-site VPNs to include the remote sites expanded network.  I have tried doing this through the ASDM and have found that I cannot add new network objects.  I have tried creating a new network object group and then added the new networks from there but I am completely unable to add the new objects.I believe a picture tells a thousand words in this case so I have attached some images which show the problem.  I have also tried going through the VPN wizard, this also does not allow me to add new network objects. 

View 2 Replies View Related

Cisco Infrastructure :: Export Objects (net And Security) From ASA 5500 Firewall To CSV File?

Feb 14, 2012

how to export objects (net and security) from an ASA 5500 firewall to a .csv file?

View 1 Replies View Related

Cisco :: LMS 4.1 No User Defined Groups Shown In Fault Notification Groups?

Dec 12, 2011

I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
   
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notification and Action Settings > Fault Notification Group

View 3 Replies View Related

Cisco Firewall :: PIX To ASA 8.3 Migration?

Mar 8, 2011

As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
 
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.

View 2 Replies View Related

Cisco Firewall :: ASA 8.0 Configuration Migration To 8.6

Feb 12, 2013

I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?

View 5 Replies View Related

Cisco Firewall :: Migration PIX 515 8.0(3) To ASA 5525-X

May 28, 2012

I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
 
The question is, what is the better method to migrade the configurations? Manually?

What is the better version for 5525-X? 8.6.1?

View 4 Replies View Related

Cisco Firewall :: Migration Error Upgrading To ASA 8.4.4

Oct 25, 2012

I was trying to upgrade an ASA to from 8.2.4 to 8.4.4, and I began receiving the following migration errors (the IP addresses have been changed to protect the innocent):
 
ERROR: MIGRATION: The following ACE is partially/not migrated to Real IP, as it could result in more permissive policy. Please manually migrate this ACE. permit esp host 1.1.1.1 host 2.2.2.2    
 
I got a TON of these, in fact the migration, and these errors ran for over 24 hours before I gave up, powercycled the unit and forced 8.2.4 to boot through ROMMON.  This was a secondary unit, that's why I let it go this long.
 
What I don't understand is that we do not have anything in the configuration for ESP.

View 1 Replies View Related

Cisco Firewall :: Migration Utility For PIX 515 8.0 To ASA5525 8.6

Oct 3, 2012

I don't seem to be able to find a migration utility  for PIX rel 8.0.4 to ASA    8.6 is there one available will save a lot of time

View 1 Replies View Related

Cisco Firewall :: PIX 515E To ASA5515 Migration?

Aug 26, 2012

Looking at migrating from the following:
 
PIX-515EPIX Security Appliance Software Version 8.0(4)Device Manager Version 6.1(5)51
 
to
 
ASA5515Cisco Adaptive Security Appliance Software Version 8.6(1)Device Manager Version 6.6(1)
 
Is this migration directly supported, or do I need to downgrade first?

View 5 Replies View Related

Cisco Firewall :: ASA-AC-M-5520 Migration To ASA-AC-M-5585?

Jan 23, 2013

I have ASA-AC-M-5520, can we migrate the license to ASA-AC-M-5585

View 1 Replies View Related

Cisco Firewall :: ASA 5550 To ASA 5555-X Migration

Apr 23, 2013

I am about to carry out a migration from ASA 5550 to ASA 5555-X, however I cannot find any detailed document or reliable tool for this migration.

View 4 Replies View Related

Cisco Firewall :: PIX515 To ASA5510 8.4(5) Migration?

Dec 18, 2012

We're migrating as mentioned in the subject and this new format is quite a departure from previous iOS versions so I thought I'd post the configs of the PIX and the ASA and ask if someone is willing to compare them and verify that it is correct and should be basically plug and play. The xxx.xxx.xxx are outside IP addresses and the yyy.yyy.yyy are inside addresses. .
 
Existing PIX config
PIX Version 6.3(4)
interface ethernet0 100full

[Code]......

View 2 Replies View Related

Cisco Firewall :: ASA 8.4 DNS Names In Object-groups

Jun 8, 2011

Is it possible somehow to define externally administred DNS namese in ASA 8.4 in within object groups?i know that we can use name XXX, but some idea popped up using this kind of configuration.

View 3 Replies View Related

Cisco Firewall :: ASA5520 - SSL VPN Service Groups?

Aug 12, 2012

how to change the order of the groups that are displayed at the SSL VPN sign in page? I am using an ASA-5520. Right now the anyconnect client group displays above the clientless SSL intranet group and I want it reversed.

View 6 Replies View Related

Cisco Firewall :: Config Migration From ASA5540 To An ASA5545-X?

Jan 22, 2013

Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
 
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
 
They are going to be using it as a VPN concentrator primarily.
 
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X? Or if they upgrade to 9,0(1) or higher, then they should be the same?

View 2 Replies View Related

Cisco Firewall :: ISP Migration With ASA 5510 And External Router?

Nov 26, 2012

My company (in Healthcare) is going to be changing ISPs for our internet connectivity, and with this change comes a new external IP block.  So I need a scheme to migrate over all of my existing VPN tunnels and other items over to new IP addresses.  We do have an external router which I plan on doing a route-map to handle which traffic the ISP should go to based on IP.  My big concern is for the ASA 5510.  Can I setup a second outside interface on the new IP range?  Then migrate my VPN tunnels over one-by-one?  A drop-dead cutover date is just not possible with all of the external companies that I have to contact to get VPN tunnels updated with.  If it's not possible, we have in our budget to get another 5510 next year as a redundant unit.  I may be able to get that early and just migrate from one firewall to another.

View 3 Replies View Related

Cisco Firewall :: ASA 8.3 Real Ip Address Automatic Migration?

Mar 23, 2011

in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
 
But my ACL's have not been migrated to real ip address. In my migration log:
 
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?

View 3 Replies View Related

Cisco Firewall :: ASA 1000V And ASA 5500 Migration Between Firewalls

Jul 8, 2012

We currently have redundant FWSM's and are planning a migration to standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and are looking at the Nexus 1000V. I understand the Nexus 1000V and VSG architecture and implementation, and I do understand that the ASA 1000V is designed for cloud environments. But I do have one question about the ASA 1000V.
 
Is it possible for an ASA 5500 series firewall to be replaced by an ASA 1000V? Basically, can an ASA 1000V be a sole firewall solution, or are ASA 5500's still needed? Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?

View 4 Replies View Related

Cisco Firewall :: ASA 5510 Object Groups / Creating New ACL

Jul 20, 2011

I have an ASA5510 where I have defined object-groups and then associated them with a specific ACL.  Our ISP is pulling their point of presence from where I live and I am force to move to a new ISP.  I am in the process of setting up another interface for the ASA5510 to connect to the new ISP.
 
My questions is can I create a new ACL lets call it new_access_in and use it with the same object groups that I have already defined?  I know that I can only have one ACL bound to an interface, and will bind this new ACL to the new interface I am setting up, but I wasn't sure if I could use the same object groups and connect them to a different ACL.  I really don't want to have to create new object groups if I don't have to.

View 2 Replies View Related

Cisco Firewall :: ASA 5510 Object-Groups Not Working

May 9, 2012

I have an ASA 5510 and have just started using object-groups which are super handy in theory, but not working in reality. I have a service object-group with a mix of tcp, icmp, and udp ports. Let's call it Sample_Port_Group. I'm trying to apply it to my dmz_access_in ACL. Here's the line giving me problems:
 
access-list dmz_access_in extended permit object-group Sample_Port_Group 192.168.1.1 any
 
The asa throws up an error between 192.168.1.1 and any. When I put up a ? after Sample_Port_Group, it gives me the option of putting in an IP address, any, etc. When I put in a ? after 192.168.1.1, it only gives me the option of putting in an IP address.URL

Those posts gave me the impression my line was possible, especially the "access-list outsideacl extended permit object-group myaclog interface inside any" line, which is at the end of the 2nd article linked.

View 2 Replies View Related

Cisco Firewall :: PIX To ASA5520 Migration Some Services Aren't Working

May 20, 2013

I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
 
-INSIDE to DMZ is working fine. (through ASA)

-INSIDE to OUTSIDE is working fine. (through ASA)
 
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
 
object-group network inside_subnet_all   network-object object inside_subnet_a   network-object object inside_subnet_b   network-object object inside_subnet_c   network-object object inside_subnet_d   network-object object inside_subnet_e   network-object object inside_subnet_f   network-object object inside_subnet_g   network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip

View 1 Replies View Related

Cisco Firewall :: ASA 5510 / ASA 8.3 Migration - Expanded Access List

Apr 24, 2011

I have just upgraded a ASA5510 from 8.2 to 8.3 using migration tool.All seemed to go well, still double checking the config as this is a bench test of upgrade prior to filed upgrades.
 
Anyway one thing that is slightly frustrating is that the migration has expanded all of my access-lists, so we maybe had 10 lines of config relating to access-lists based on access-groups, now we have hundreds of lines.On ASDM this is bad enough but on CLI with show run its a bit of a bind.
 
Is there any way to un-expand the access list or do I simply delete and start again using my access groups.

View 2 Replies View Related

Cisco Firewall :: ASDM 5.0.7 Creates Duplicate Network Object Groups

Aug 5, 2011

We are facing the problem in ASDM 5.x creates duplicate network object groups in the configuration when PIX with software 7.0.7 is used.
Audit report its showing below commands :
 
asdm group SALES_ref dmz2 reference SALES object-group network SALES_ref network-object 172.20.7.8 network-object 172.20.10.3 network-object 172.20.11.2
 
no access-list dmz2_access_in extended permit tcp object-group Network_10.10.1.0 object-group SALES object-group SALES_Ports access-list dmz2_access_in line 200 extended permit tcp object-group Network_10.10.1.0 object-group SALES_ref object-group SALES_Ports
 
i was created SALES object group 2 month back after that ASDM Automatically created the duplicate object with SALES_ref name and changed the old ACL.

View 3 Replies View Related

Cisco Firewall :: ASA 5520 / Use Active Directory Groups For Allow Internet To Clients?

Dec 18, 2012

it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.

View 1 Replies View Related

Cisco Firewall :: ASA 5520 / Use Active Directory Groups For Allow Internet To Clients

Feb 21, 2012

it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved