Cisco Firewall :: PIX To ASA 8.3 Migration?
Mar 8, 2011As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.
ADVERTISEMENT
Cisco Firewall :: ASA 8.0 Configuration Migration To 8.6
Feb 12, 2013I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
View 5 Replies View RelatedCisco Firewall :: Migration PIX 515 8.0(3) To ASA 5525-X
May 28, 2012I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?
Cisco Firewall :: Migration Error Upgrading To ASA 8.4.4
Oct 25, 2012I was trying to upgrade an ASA to from 8.2.4 to 8.4.4, and I began receiving the following migration errors (the IP addresses have been changed to protect the innocent):
ERROR: MIGRATION: The following ACE is partially/not migrated to Real IP, as it could result in more permissive policy. Please manually migrate this ACE. permit esp host 1.1.1.1 host 2.2.2.2
I got a TON of these, in fact the migration, and these errors ran for over 24 hours before I gave up, powercycled the unit and forced 8.2.4 to boot through ROMMON. This was a secondary unit, that's why I let it go this long.
What I don't understand is that we do not have anything in the configuration for ESP.
Cisco Firewall :: Migration Utility For PIX 515 8.0 To ASA5525 8.6
Oct 3, 2012I don't seem to be able to find a migration utility for PIX rel 8.0.4 to ASA 8.6 is there one available will save a lot of time
View 1 Replies View RelatedCisco Firewall :: PIX 515E To ASA5515 Migration?
Aug 26, 2012Looking at migrating from the following:
PIX-515EPIX Security Appliance Software Version 8.0(4)Device Manager Version 6.1(5)51
to
ASA5515Cisco Adaptive Security Appliance Software Version 8.6(1)Device Manager Version 6.6(1)
Is this migration directly supported, or do I need to downgrade first?
Cisco Firewall :: ASA-AC-M-5520 Migration To ASA-AC-M-5585?
Jan 23, 2013I have ASA-AC-M-5520, can we migrate the license to ASA-AC-M-5585
View 1 Replies View RelatedCisco Firewall :: ASA 8.3 - Migration Changes Hosts To Objects?
Sep 24, 2012I'm testing upgrading an ASA from 8.2.5 to 8.4.4. During the the upgrade, it change all of my ACL host entries to objects. But I noticed that the keyword "host" is still a valid option when creating an ACL.
I'm trying to understand why this change is made during the migration.
Cisco Firewall :: ASA 5550 To ASA 5555-X Migration
Apr 23, 2013I am about to carry out a migration from ASA 5550 to ASA 5555-X, however I cannot find any detailed document or reliable tool for this migration.
View 4 Replies View RelatedCisco Firewall :: PIX515 To ASA5510 8.4(5) Migration?
Dec 18, 2012We're migrating as mentioned in the subject and this new format is quite a departure from previous iOS versions so I thought I'd post the configs of the PIX and the ASA and ask if someone is willing to compare them and verify that it is correct and should be basically plug and play. The xxx.xxx.xxx are outside IP addresses and the yyy.yyy.yyy are inside addresses. .
Existing PIX config
PIX Version 6.3(4)
interface ethernet0 100full
[Code]......
Cisco Firewall :: Config Migration From ASA5540 To An ASA5545-X?
Jan 22, 2013Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
They are going to be using it as a VPN concentrator primarily.
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X? Or if they upgrade to 9,0(1) or higher, then they should be the same?
Cisco Firewall :: ISP Migration With ASA 5510 And External Router?
Nov 26, 2012My company (in Healthcare) is going to be changing ISPs for our internet connectivity, and with this change comes a new external IP block. So I need a scheme to migrate over all of my existing VPN tunnels and other items over to new IP addresses. We do have an external router which I plan on doing a route-map to handle which traffic the ISP should go to based on IP. My big concern is for the ASA 5510. Can I setup a second outside interface on the new IP range? Then migrate my VPN tunnels over one-by-one? A drop-dead cutover date is just not possible with all of the external companies that I have to contact to get VPN tunnels updated with. If it's not possible, we have in our budget to get another 5510 next year as a redundant unit. I may be able to get that early and just migrate from one firewall to another.
View 3 Replies View RelatedCisco Firewall :: ASA 8.3 Real Ip Address Automatic Migration?
Mar 23, 2011in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
Cisco Firewall :: Recreate Objects In Groups After Migration To 8.3?
Feb 22, 2012when I migrated the ASA config from 8.2 to 8.3, in all groups the group members has been replaced by the IP address object. However, the "name" for this object has been migrated, but there is the "object network name" configuration missing.
What I can do now is that I can open the new created object in the ASDM, search for the object with this IP address and then enter the object name I had before. When I apply the config, ASDM then creates the object and replaces all affected objects in all groups, by replacing the object group memeber "network-object host hostname" with "network-object object hostname".
Do you know if there exists an automated way, which checks all the groups for members "network-object host", creates the "object network" and replaces the "network-object hosts" with "network-object object" within the group? As long we have a lot of groups which contains partially > 50 members?
Cisco Firewall :: ASA 1000V And ASA 5500 Migration Between Firewalls
Jul 8, 2012We currently have redundant FWSM's and are planning a migration to standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and are looking at the Nexus 1000V. I understand the Nexus 1000V and VSG architecture and implementation, and I do understand that the ASA 1000V is designed for cloud environments. But I do have one question about the ASA 1000V.
Is it possible for an ASA 5500 series firewall to be replaced by an ASA 1000V? Basically, can an ASA 1000V be a sole firewall solution, or are ASA 5500's still needed? Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?
Cisco Firewall :: PIX To ASA5520 Migration Some Services Aren't Working
May 20, 2013I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
-INSIDE to DMZ is working fine. (through ASA)
-INSIDE to OUTSIDE is working fine. (through ASA)
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
object-group network inside_subnet_all network-object object inside_subnet_a network-object object inside_subnet_b network-object object inside_subnet_c network-object object inside_subnet_d network-object object inside_subnet_e network-object object inside_subnet_f network-object object inside_subnet_g network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip
Cisco Firewall :: ASA 5510 / ASA 8.3 Migration - Expanded Access List
Apr 24, 2011I have just upgraded a ASA5510 from 8.2 to 8.3 using migration tool.All seemed to go well, still double checking the config as this is a bench test of upgrade prior to filed upgrades.
Anyway one thing that is slightly frustrating is that the migration has expanded all of my access-lists, so we maybe had 10 lines of config relating to access-lists based on access-groups, now we have hundreds of lines.On ASDM this is bad enough but on CLI with show run its a bit of a bind.
Is there any way to un-expand the access list or do I simply delete and start again using my access groups.
Cisco Firewall :: Configuration Migration From ASA 5540 Running 7.2 To 5525X Running 9.1
May 7, 2013I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedCisco :: Migration From WCS (7.0.230..0) To NCS
Aug 15, 2012I've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?
View 1 Replies View RelatedCisco :: ASA-SM Migration Experience?
May 22, 2012Is anybody deploying ASA Services Module? I am looking for feedback/gotchas/advice for a migration from an ASA-5550 HA pair.I also received confirmation from Cisco that VPN termination is active in the latest 8.5/8.6 code releases, so hopefully should be able to fully retire my 5550's.
View 4 Replies View RelatedCisco :: 800 / WLSE To WCS Migration?
Jun 20, 2011what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?
View 1 Replies View RelatedCisco :: Data Migration From LMS 3.2 To 4.1?
Nov 13, 2011Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Best Way To Do Migration
May 19, 2013I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.
Cisco AAA/Identity/Nac :: Migration From ACS 4.0 To ACS 5.0?
Mar 22, 2011what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
Cisco AAA/Identity/Nac :: ACS Migration From 4.1.1.23 To 5.2?
Jan 14, 2012I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 Migration To 5.3
Jun 11, 2012If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?
whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?
Cisco :: 7.0.164.3 / Data Migration From WCS To NCS?
Dec 10, 2012I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
Cisco :: NCM Features Migration To LMS 4.2
Mar 5, 2013NCM is going away. It is recommend to move to LMS. We already have a LMS deployment. Currently just used for Monitoring/Performance.Trying to figure out how to get the Configuration change piece that we used NCM for into LMS. Not really having any luck.What I am really wanting to do is configuration archive, device config change notices (when a device config changes I can run report to see who and what was changed), and configuration comparisions (between old and new configs)
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS Migration From 4.1 To 5.4
Jun 12, 2013I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
View 5 Replies View RelatedCisco Wireless :: WCS 7.0 To NCS Migration
Dec 24, 2011I'm trying to get all the templates and Maps I've created in WCS into our new NCS. The instructions say just run the export.bat file on WCS and then Migrate into NCS. I cannot find any export.bat file on version 7.0.220.0 of WCS. Is it only available in WCS version 7.0.164.3 ro 7.0.172.0? Do I have to use the export.bat file or can I just do a regular backup and restore?
View 7 Replies View RelatedCisco :: LMS 3.0 To Prime 1.1/ LMS 4.2 Migration?
Nov 28, 2012A customer is asking to upgrade their LMS 3.0 to Prime 1.1. However, the customer or their previous system's integrator never actually installed LMS 3.0. The licensing and PAK were never used as well. My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed? How would the migration of the current licensing work with the new licensing PAK if that is the case? Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?
View 2 Replies View RelatedCisco :: Migration From Asa5505 To Asa5510?
Jul 3, 2012i exported config file from asa5505. i changed this file and i imported in my asa5510. can you tell me that config file allright
View 1 Replies View RelatedCisco :: Migration From Windows LMS 4.0.1 To Appliance 4.1?
Oct 4, 2011Can't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?
View 1 Replies View Related