what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?
View 1 RepliesI cannot access WLSE, after migration from ACS 4.2 to ACS 5.2. WLSE was configured with tacacs+ management. In ACS 5.2 I've configured the optional custom attributes: groups = "System Admin"
View 2 Replies View RelatedBecause the /var is 99% full, I have problems with taking backup. I have also problems with login into the web-page. I’m authenticated, but then I get: User Role is empty.
View 5 Replies View RelatedI am having problem to configure WLSE1030 Second thing if I configured something via web browser it is not getting erased.
View 2 Replies View RelatedI have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies View RelatedHow do I know which hardware I have? I can't find a HW version anywhere on the appliance or in WLSE itself. I am guessing 1105 beacuse I saw a 1105 as part of the path in the repository.
View 2 Replies View RelatedDoes the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies View RelatedI current have a network setup with five 1240AG access points. One is configured as a WDS. I also have a WLSE appliance. I have IAS configured on a domain controller running Cisco Secure ACS Agent. My setup works and my clients can authenticate with certificates to Active Directory. My problem is that I need to take my WLSE out of the mix - it is old and failing. I cannot afford a replacement. I know that in order to use WDS, I have to have a WLSE.
So my question is this. If I configure my APs so that do not participate in SWAN, and leave them setup to use EAP and point to my Windows IAS for RADIUS, running Cisco Secure Agent, will they be able to authenticate still.
To be honest, I set this up a long time ago and I cannot remember if the WLSE is required for domain authentication. I know if offered Domain Authentication and I have my Windows Server setup in there. So I am not sure if my APs can authenticate directly to the Windows Server without it.
Running WLSE 1.3 and it shows No Data Available. Checked the task history for Inventory collection and it is not collecting. All the processes are running. Unable to gather data. SNMP community strings are configured and devices are accessible (AP350's).
View 3 Replies View RelatedMy WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedI've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?
View 1 Replies View RelatedIs anybody deploying ASA Services Module? I am looking for feedback/gotchas/advice for a migration from an ASA-5550 HA pair.I also received confirmation from Cisco that VPN termination is active in the latest 8.5/8.6 code releases, so hopefully should be able to fully retire my 5550's.
View 4 Replies View RelatedAre there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
View 1 Replies View RelatedI have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.
what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
View 1 Replies View RelatedIf we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?
whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?
I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
NCM is going away. It is recommend to move to LMS. We already have a LMS deployment. Currently just used for Monitoring/Performance.Trying to figure out how to get the Configuration change piece that we used NCM for into LMS. Not really having any luck.What I am really wanting to do is configuration archive, device config change notices (when a device config changes I can run report to see who and what was changed), and configuration comparisions (between old and new configs)
View 5 Replies View RelatedI need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
View 5 Replies View RelatedAs we are all aware that the ASA8.3 has quite some changes interms of configuration method.
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.
I'm trying to get all the templates and Maps I've created in WCS into our new NCS. The instructions say just run the export.bat file on WCS and then Migrate into NCS. I cannot find any export.bat file on version 7.0.220.0 of WCS. Is it only available in WCS version 7.0.164.3 ro 7.0.172.0? Do I have to use the export.bat file or can I just do a regular backup and restore?
View 7 Replies View RelatedA customer is asking to upgrade their LMS 3.0 to Prime 1.1. However, the customer or their previous system's integrator never actually installed LMS 3.0. The licensing and PAK were never used as well. My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed? How would the migration of the current licensing work with the new licensing PAK if that is the case? Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?
View 2 Replies View Relatedi exported config file from asa5505. i changed this file and i imported in my asa5510. can you tell me that config file allright
View 1 Replies View RelatedCan't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?
View 1 Replies View RelatedWe have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live. I need the new unit as we have reached our limit of licensed AP's on the old 4404. It seems like everyone keeps talking about an easy way but no one says how to do it.
I have never setup one of these units before from scratch so I don't know how long it will take.
I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
View 5 Replies View RelatedWCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.
View 13 Replies View RelatedI'm currently working on migration from CSS to ACE. The ACE appliance is running A4(2.0) code. And i couldn't find the CSS to ACE conversion tool in the Web gui.
View 2 Replies View Relatedmy company has the asa 5505 working as the remote access vpn server. my company needs more licenses for vpn than the asa 5505 give it. because of my company purchased the asa 5510. i must migrate configuration from the asa 5505 to the asa 5510. i exported configuration file from asa 5505. i made the changes on them and imported them in the asa 5510. my asa5510 doesn't work. i putted configuration files from asa 5505 and 5510.
View 10 Replies View RelatedWe have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.
View 6 Replies View RelatedHave upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.
I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?