Cisco Wireless :: WAP4410N - Managed By WLSE Express?
Feb 2, 2011Does the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies
ADVERTISEMENT
Cisco :: WLSE Express 1030 Boot Error?
Feb 13, 2011I have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies View RelatedCascading Managed And Un-managed Switches
Oct 17, 2011is it possible to cascade a managed cisco switch with an unmanaged switch via SFP LC Modules?
View 1 Replies View RelatedCisco Wireless :: WLSE 1030 2.15 Configuration?
Jan 3, 2008I am having problem to configure WLSE1030 Second thing if I configured something via web browser it is not getting erased.
View 2 Replies View RelatedCisco Wireless :: 1240AGs Active Directory Authentication Without WLSE?
Feb 28, 2013I current have a network setup with five 1240AG access points. One is configured as a WDS. I also have a WLSE appliance. I have IAS configured on a domain controller running Cisco Secure ACS Agent. My setup works and my clients can authenticate with certificates to Active Directory. My problem is that I need to take my WLSE out of the mix - it is old and failing. I cannot afford a replacement. I know that in order to use WDS, I have to have a WLSE.
So my question is this. If I configure my APs so that do not participate in SWAN, and leave them setup to use EAP and point to my Windows IAS for RADIUS, running Cisco Secure Agent, will they be able to authenticate still.
To be honest, I set this up a long time ago and I cannot remember if the WLSE is required for domain authentication. I know if offered Domain Authentication and I have my Windows Server setup in there. So I am not sure if my APs can authenticate directly to the Windows Server without it.
Cisco Wireless :: 802.11 WAP4410N To WAP4410N Backhaul Using N Protocol?
Apr 30, 2011I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
Cisco :: 800 / WLSE To WCS Migration?
Jun 20, 2011what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?
View 1 Replies View RelatedCisco :: WLSE 1105 And Disk 99% Full (/var)
Jan 25, 2005Because the /var is 99% full, I have problems with taking backup. I have also problems with login into the web-page. I’m authenticated, but then I get: User Role is empty.
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 - Cannot Access WLSE After Migration
Nov 30, 2011I cannot access WLSE, after migration from ACS 4.2 to ACS 5.2. WLSE was configured with tacacs+ management. In ACS 5.2 I've configured the optional custom attributes: groups = "System Admin"
View 2 Replies View RelatedCisco :: 1105 Can't Find HW Version Anywhere On Appliance Or In WLSE Itself
Oct 20, 2005How do I know which hardware I have? I can't find a HW version anywhere on the appliance or in WLSE itself. I am guessing 1105 beacuse I saw a 1105 as part of the path in the repository.
View 2 Replies View RelatedCisco :: AP350 Trend Reports In WLSE 1.3 Shows No Data
Jul 23, 2003Running WLSE 1.3 and it shows No Data Available. Checked the task history for Inventory collection and it is not collecting. All the processes are running. Unable to gather data. SNMP community strings are configured and devices are accessible (AP350's).
View 3 Replies View RelatedCisco Wireless :: How To Let AP1262 Download From WLC And Been Managed
Jan 15, 2012Some days ago, I download standard IOS image for 1262 and installed, now this 1262 AP can start up without WLC. but I don't know how to recovery this AP image, and let's startup / download the image from WLC and has been managed...Is that ONLY remove the existence image ? and it's will be auto find WLC ?
View 5 Replies View RelatedWireless Access Point Managed By Computer?
Aug 23, 2012I recently upgraded to a new wireless access point with wireless N and still have the old G one. Wireless access point plugs into computer with 2nd ethernet port configured to give access point internet. Then, the computer would manage access to the network, restrictions, firewall for the access point and so on.
View 4 Replies View RelatedFinding A Centrally Managed Wireless Hotspot System?
Oct 9, 2012I am looking for a centrally managed wireless hotspot system. But the system has a few requirements. I have been looking around but so far I have not found a system that ticks all the boxes?
-The system (AP's) needs to be centrally managed (except for the internet connections, each site will use its own outgoing connection to the internet).
-The system needs to have some kind of ticket system for guest access (hotspot).
-It also needs to be able to identify employees so they can pass through without needing a ticket, everywhere they go.
Cisco Wireless :: 1140 Series AP - Centrally Managed Versus Standalone
Jun 13, 2012I have a number of existing 1140G Access points.I now need to purchase a couple of new AP's to expand coverage and it makes sense to go with the latest N standard ones.Currently I only have standalone models and at the moment I don't have the budget to purchase a management box to allow me to get centrally managed models.
If I purchase 1140N standalone AP's now, can I convert the to centrally managed ones later? If yes, Any disadvantage in doing this?
Cisco Wireless :: Wireless Network Managed By 5508 WLC
Apr 24, 2012we have a working wireless network managed by a 5508 WLC and nearly a hundred AP in different buildings. We want to integrate several apple-tv in different WLAN. We enable global multicast mode and igmp snooping on the WLC. When clients connect to these wlan airplay functionnality operates for 2 or 3 minutes max and after the airplay icon disappears on iDevices. If i want airplay to work again i need to reboot the Apple-TV but again it can't work for more than 2-3 minutes.
View 8 Replies View RelatedLinksys Wireless Adapters :: AE1000 Requires Connections To Be Managed By Windows 7
Jan 19, 2011Trying to install the Linksys AE1000 wireless adapter on Windows 7 x64. So I follow the instructions. insert CD. Insert adapter.The i get this error:
"Linksys Wireless-N Router requires that wireless connections are to be managed by the Microsoft Windows Wireless Connection Manager. Some laptops and computers are pre-loaded with a different wireless connection manager which prevents your Valet or Linksys Wireless-N Router installation from loading. If this is the case, then you will need to disable or turn OFF the other wireless connection manager, and enable the Microsoft Windows Wireless Connection Manager instead."
What manager? This is windows 7, I'm not using any third party wireless utility so I don't understand why I'm getting this particular error. If windows wireless connection manager is off, how do I enable it?I've always managed my network setting through the Network and sharing center,I've tried:
(1) sweeping registry files before install(2) Plugging in AE1000 first and manually installing drivers
When I did this, the device shows up successfully in device manager and the driver installs smoothly, however when I go to network adapters, the AE1000 is listed as disabled. I tried enabling it but to no avail. Running the network diagnostics claims the driver doesn't work despite the fact that it installed successfully.
After several restarts and disabling/re-installations I recieve the same error.The end goal is to connect the AE1000 to a Cisco E3000 router.
Wireless :: Outlook Express On Two Platforms At The Same Time?
Nov 30, 2012I have a mac and an android connected to a wireless network and can not open outlook express on both at the same time. Is that just the way it is.
View 2 Replies View RelatedOutlook Express No Email On Laptop Wireless?
Sep 21, 2012I received 3 emails on my laptop and haven't received another since. Why isn't my emails coming through on my laptop but coming through just fine on my desk computer?
View 2 Replies View RelatedWNDR3700 USB Vs Mini-PCI Express Wireless Networking
Mar 13, 2011I've got an older desktop that needs a dual band upgrade and would like to know if a PCIe adapter w/ external antennas for desktop wireless is better/faster than the USB variety? They cost about the same. The router is a dual band WNDR3700 v1.
I've heard salespeople at retailers say, for desktop, go w/ the USB as they offer better performance than PCIe adapters even w/ external antennas... Does anyone know if the extra noise within the desktop case kills whatever benefits that the extra power and external antennas that a PCIe card has over a USB adapter?
Dell :: Wireless Express Card For Inspiron B120?
Jul 31, 2006I bought a netgear router and usb card for my B120. If I get the wireless card for the B120 can I still use the router I already have for this? Where do I find the correct Express Card for my laptop? I have searched the dell site for the part but cant find it.
View 8 Replies View RelatedLinksys Wireless Router :: EA3500 Bridged To Airport Express?
Dec 28, 2012I have just recently replaced my Netgear router with an EA3500 and have it bridged t an Airport Express. From there I have an ethernet cable attached to an AV receiver (Pioneer 1021k), but all to often now with this new router to use any of the features of the receiver ie Airplay, iOS app remote, I must restart the router EVERY time. This is frustrating because the these issues were never present with the netgear router.
View 9 Replies View RelatedLinksys Wireless Router :: E4200v2 - Airport Express Drops Wireless Connection?
Apr 20, 2012I get frequest Airport Express wireless connection drop and reconnect with my replacement e4200v2 running the latest firmware. I have it connected the 5Ghz band and set to channel 161.
View 9 Replies View RelatedLinksys Wireless Router :: Add Airport Express To E3000 Home Network?
Dec 15, 2011I added an airport express wirelessly to my E3000 network at home. Other wireless devices (laptop) sometimes have issues seeing it within the network. If these devices are wired in the network they don't have any issues seeing the airport express. Is there any special configuration I need to do to my E3000 so that wireless devices can see each other? I also had the same issue with my ps3 for streaming from wireless laptop to wireless ps3.
View 5 Replies View RelatedLinksys Wireless Router :: WRT610N Can Set Up Airport Express On A Total Different Frequency
Dec 9, 2011When it comes to networking and require some advice on setting up my wrt61on router with my airport express. I have managed to get it all connected up and working but am suffering frequent dropouts while streaming music. I have done a little reading and have tried changing a few settings on the router but have found no improvement. My set up is as follows.
-Modem connected to WRT610N Router
-Desktop Computer connected to network via wusb600N dongle
-Airport Express connected via wif
-Using Iphone 4 as remote
Is there a way where i can set up the airport express on a total different frequency to everything else in the house i.e laptops iphones etc to prevent these cutouts.
D-Link DIR-825 :: Bonjour / AirTunes / AirPlay Via Airport Express Over Wireless Stops
Nov 13, 2011My problem is this: Randomly, the DIR-825 will prohibit streaming to my AirPort Express via AirTunes. It'll also disappear from Bonjour Browser and AirPort Utility. I can connect directly to it, if I enter the IP into the AirPort utility directly.The only way to get it to come back is to either reboot the DIR-825, reboot the AE, or unplug the ethernet to the AE.
View 3 Replies View RelatedCisco :: WLSE 1030 Hard Drive Failed / Replaced It With New Drive
Mar 17, 2011My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedLinksys Wireless Router :: Wrt120n Won't Route Airport Express To Wifi Client
Sep 3, 2011I have an Airport Express and two wireless routers. The Airport Express is connected to Router 1 via Ethernet. Router 2 is connected to Router 1 via Ethernet. Since I like to know which Wireless Router I'm connected to, Router 1 & 2 use different SSIDs. Router 1 is the DHCP server (DHCP turned off on Router 2). All security settings are turned OFF.Router 1 is a Linksys WRT120N with latest firmware and Router 2 is a Belkin Wireless Router.I can connect via wireless to Router 1 and Router 2 via the seperate SSIDs and have Internet connectivity (Router 1 is connected the the Internet) and print to a wireless printer connecter to the Router 1 wireless network.
Now here is the strange thing. I can see the Airport Express only if I connect to the Router 2 wireless network!!! I cannot see it if I connect to the Router 1 wireless network, yet the Airport Express is connected via Ethernet to ROUTER 1 !So for some reason, the LinkSys WRT120N Wireless Router won't route the Airport Express to a wireless client on it's own wireless network, but it will route it to an Ethernet client which is what any client connected to Router 2 wirelesslessly is seen as. When connected to router 1 wirelessly I can ping the IP of the Airport but something is preventing it from working with iTunes/iPhone/Airport Utility. It is bizarre because these are all devices connected to the same LAN. SInce I can ping it, it tells me that it isn't a routing issue, but there must be some sort of filter between the wireless and ethernet that is preventing the Airport protocol from being transmitted.
Linksys Wireless Router :: Configure Apple Airport Express To Extend Wrt120N Network
Aug 6, 2011Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how?
View 2 Replies View RelatedDell :: Drivers For Wireless 5300 PCI Express Internal Half-Height Mini-Card?
Mar 1, 2012I have the Wireless 5300 PCI Express Internal Half-Height Mini-Card ordered and now need to find the drivers. My system is a 1735 Studio laptop running 64bit Windows 7. The Dell sales rep said the card came only with the card and a flat head screw.
View 3 Replies View RelatedCisco :: Layer 3 Managed Switch?
Apr 30, 2012I need a ≥ 8 port layer 3 managed switch. What would be the cheapest solution for this?I've been looking at some stuff like Cisco 4908G, but that only supports 1000base-X. I need something that supports the standard 1000base-T. I've also looked at a Cisco WS-C3508G-XL-EN, but correct me if I'm wrong, this is only layer 2?
View 11 Replies View RelatedCisco :: How Many VLANs Can Be Managed With AIR-AP1252AG-E-K9 AP
Jul 19, 2011How many VLANs can be managed with the AIR-AP1252AG-E-K9 APs ? My customer wants to manage 4 VLANs, data, voice, guest and another.
View 2 Replies View RelatedCisco :: LMS 4.1 / All Unmanaged Set Devices Get Back To Managed?
May 2, 2012Because of licensing we want to keep some particular devices unmanaged via Inventory => Manage/Unmanage devices.But after some minutes all unmanaged set devices get back to managed. Its reproduceable many times.
View 3 Replies View Related
