Cisco :: How Many VLANs Can Be Managed With AIR-AP1252AG-E-K9 AP
Jul 19, 2011How many VLANs can be managed with the AIR-AP1252AG-E-K9 APs ? My customer wants to manage 4 VLANs, data, voice, guest and another.
View 2 Replies
ADVERTISEMENT
Cascading Managed And Un-managed Switches
Oct 17, 2011is it possible to cascade a managed cisco switch with an unmanaged switch via SFP LC Modules?
View 1 Replies View RelatedCisco Wireless :: AIR-AP1252AG-A-K9 Won't Load
Oct 11, 2011I have three of these AP that quit associating with the controller after a power loss. I have dismounted one of them and it has an Amber light on ethernet LED and Green Light on radio LED and off on status.It does not respond to reset and nothing happen when i console into it. What might have happened to this AP? It's barely two years. I have tried different power injectors and direct power and still behaves the same way.
View 3 Replies View RelatedCisco :: Will AP1252AG-N-K9 Works With WLC 5760
Feb 4, 2013We have 80 LAP1252AG and WLC 4404. We plan to upgrade our WLC 4404 to WLC 5760 but not sure if our current APs will work with the new WLC 5760.
View 1 Replies View RelatedCisco :: Failed POST For AP1252AG-A-K9
May 8, 2013We have a AP1252AG-A-K9. Everytime we load it up this is what we get (see below). I tried resetting the system ("mode" way) and it did not fix the issue. I tried to reinstall the IOS and it fixes everything up and the AP will work as normal but everytime I reset the modem I will get an error message below. [code]
View 5 Replies View RelatedCisco Wireless :: AIR-AP1252AG-C-K9 Failed - Cannot Access Via IP And CDP
Feb 18, 2013yesterday I have my AIR-AP1252AG-C-K9 failed, I cannot access it via IP and I also cannot find it via CDP. when i connect the power, the ethernet and radio lights go to red and status light goes orange/amber immediately and keep this all the time.if i try to hold the mode button from when i connect the power, all three lights keep off and never be on unless you leave the mode button along and re-connect the power.and there is NO output from the sierial console.
View 3 Replies View RelatedCisco Wireless :: Change Country Code For AIR-AP1252AG-E-K9
Jul 23, 2012We have an AP located on a German site which is supposed to connect to a WLC which is in Germany as well. Our network however is spread to France as well where another WLC is located. Now, the AP can not be convinced to connect to the German WLC. Despite our efforts (e.g. manuel IP configuration, reset to factory defaults) we don't manage to bring that AP to the German network - this is by the way the only AP, all other approx. 200 work just fine.
View 6 Replies View RelatedCisco Wireless :: AIR-AP1252AG Autonomous AP Can Be Changed To LWAPP AP
Aug 25, 2011I would like to know AIR-AP1252AG-A-K9 (Autonomous AP) can be changed to LWAPP AP by changing IOS image??
View 1 Replies View RelatedCisco :: Getting AP1252AG-E-K9 Running Against Microsoft Windows Server 2008 R2 IAS?
Oct 28, 2011How to be able to get AP1252AG-E-K9 running against Microsoft Windows Server 2008 R2 IAS.I am getting these errors:
RADIUS/DECODE: convert VSA string; FAIL
RADIUS/DECODE: cisco VSA type 1; FAILRADIUS/DECODE: VSA; FAILRADIUS/DECODE: decoder; FAIL
RADIUS/DECODE: attribute Vendor-Specific; FAIL
RADIUS/DECODE: parse response op decode; FAILRADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
Cisco Firewall :: To Deploy ASA5585 In Between User Vlans And Server Vlans
Jun 1, 2012WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.
View 2 Replies View RelatedCisco :: Layer 3 Managed Switch?
Apr 30, 2012I need a ≥ 8 port layer 3 managed switch. What would be the cheapest solution for this?I've been looking at some stuff like Cisco 4908G, but that only supports 1000base-X. I need something that supports the standard 1000base-T. I've also looked at a Cisco WS-C3508G-XL-EN, but correct me if I'm wrong, this is only layer 2?
View 11 Replies View RelatedCisco Wireless :: How To Let AP1262 Download From WLC And Been Managed
Jan 15, 2012Some days ago, I download standard IOS image for 1262 and installed, now this 1262 AP can start up without WLC. but I don't know how to recovery this AP image, and let's startup / download the image from WLC and has been managed...Is that ONLY remove the existence image ? and it's will be auto find WLC ?
View 5 Replies View RelatedCisco :: LMS 4.1 / All Unmanaged Set Devices Get Back To Managed?
May 2, 2012Because of licensing we want to keep some particular devices unmanaged via Inventory => Manage/Unmanage devices.But after some minutes all unmanaged set devices get back to managed. Its reproduceable many times.
View 3 Replies View RelatedCisco Switching/Routing :: SG-300-20 Managed Switch
Oct 11, 2012I have a SG-300-20 Managed switch. I attached a picture of what I want to do. Is this possible to do? How would I go about doing it?
View 6 Replies View RelatedGood Managed Media Converter?
Jan 16, 2012I'm looking for a good managed (i.e. a unit with stats and troubleshooting capabilities) fiber-to-copper media converter. I know there's plenty of "dumb" media converter choices out there, but was hoping to get one that has a console conn or the like to troubleshoot any possible issues. I'm converting between 50nm multi-mode fiber with an SC connector to 1000-bT copper.
View 6 Replies View RelatedManaged Or Unmanaged Switch Network
Mar 21, 2013i have a 20 story high rise condo bldg that i am providing internet service to. I have a 8 port managed network switch on the 1st floor. I have a cat6 line ran from each port to the 8 distrabution closets in the bldg.My question is this if i am using a managed switch to send the signal to the other switches, do the other switches also need to be managed? or can i use unmanaged switches at the other locations. I do not want each condo on those switches to be able to see or comunicate with the other condos on those switches. I am using 48 port switches in the 8 distrabution closets.
View 5 Replies View RelatedLayer 3 Managed Switch - HP V1910-24g
Mar 6, 2012I'm looking to get a layer 3 managed switch. The HP we currently have only does layer 2.I'm looking at a HP v1910-24g. It has 24 10/100/1000 ports and looks to be layer 3 as well.It looks like they can be had for around $350.Anything different I should be looking at with similar specs? Any issues with the v1910-24g?
View 19 Replies View RelatedCisco Switches :: SLM2048T Can Be Configured As Managed Switch
Feb 25, 2013such as the SLM2048T can be configured as an managed switch. Our schools have laptop carts and we want to put switches in the carts so that the laptops will be plugged into the network when not in use and software installs, updates, etc. can be pushed to the laptops while they're in the cart instead of waiting for them to be taken out, powered on and pushed over wireless. I can find a 10/100 48-port unmanaged switch, but I really want a gigabit unmanaged switch, but they don't seem to exist so I was wondering if a managed switch can be configured and used as an unmanaged switch. I don't want to have to assign a static IP address to the switch.
View 1 Replies View RelatedCisco WAN :: 3400 How To Start Managed Switch Connection With PC
Aug 31, 2012I am a lucky enduser of an 3400 ME switch.i admin an 80 comp LAN with segments splitted by unmanaged layer 2 switches.Now i want ti use a 3400 me switch .I connect an ethernet cable between the console port of switch and lan computer dell server application windows 7 ethernet port.What's next?I browse the cisco site,download configuration assistent but nothing.I installed a hyperterminal and wait for call ,nothing.So,what's next?how can i give an ip to cisco swith?
View 1 Replies View RelatedCisco Switches :: Access CLI Mode In Sf 302-08p 8-port 10/100 Managed?
Dec 13, 2011how to access the CLI mode in cisco sf 302-08p 8-port 10/100 Managed switch. I treid the every method they mentioned in the Admininstration guide.I am not able to enter the command debug-mode and comand menu after resetting the default password. After logging in, its directly guiding me to switch main menu.
View 3 Replies View RelatedCisco :: LMS 3.2. Campus Manager (5.2.1) And Devices In Not Managed State
Dec 29, 2010I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies View RelatedCisco Wireless :: WAP4410N - Managed By WLSE Express?
Feb 2, 2011Does the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies View RelatedCisco Switches :: SF 302-08 Managed Switch - WiFi Hotspot
Aug 31, 2011I have bought this switch to try :
We (our company) have a new glass fiber internet from a provider with 5 ip-addresses in an /29 range. I try the accomplice the following. On port 1 comes the output from the provider. On port 2 till 7 I want to separate the ip addresses so can distribute these addresses to our lan, to a wifi hotspot for external company visitors etc. So on port 2 a ip to the lan, on port 3 a ip to wifi router
Cisco WAN :: MPLS For ISP Offers Managed Router 2900
May 14, 2013I wanted to get some opinions on the topic above. We are purchasing MPLS services from a large ISP and they offer a managed router option. I will also have a Cisco ISR 2900 at each site running SRST for my voice system. I have some experience with BGP and am not scared at all to support it if need be. That said, I am currently looking at pros and cons of going with a managed router from this company vs managing my own. Actually, I will manage my own regardless and would just plug it into the managed router. My router is perfectly capable of handling the BGP protocol but I am hoping that I can get some opinions from all of you.
View 6 Replies View RelatedCan 40 User Accounts Be Created And Managed On Windows 7
Mar 7, 2013How do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies View RelatedConnecting 2 Public IP With Managed Switch And A Router?
Oct 11, 2011I have two public IP's entering a location from two different sources. One is under our control and the other is a 3rd party. Lets say Ours: 1.2.3.1 3rd Party 1.2.3.2
One is coming in through a firewall/router and the other is a direct link. Each will come into a different network segment 192.168.200.0/24 and 192.168.210.0/24
some of the hosts one subnet will need to talk to the other.
My envisioned setup would be as follows.
1.2.3.1 will come in to the firewall/router into the managed switch. 1.2.3.2 will come in the the same switch but in a vlan The vlan will have a trunked port to the firewall/router to allow routing between the vlan (192.168.210.0) and the other subnet (192.168.200.0).
Wireless Access Point Managed By Computer?
Aug 23, 2012I recently upgraded to a new wireless access point with wireless N and still have the old G one. Wireless access point plugs into computer with 2nd ethernet port configured to give access point internet. Then, the computer would manage access to the network, restrictions, firewall for the access point and so on.
View 4 Replies View RelatedMarconi ASX-200BX / Setting Up An ATM Managed Switch?
Jun 22, 2012Looking for support on setting up an ATM managed switch. It is a little older and void of documentation, model being Marconi ASX-200BX, that I can console but am lost from there. Much different than any Cisco switch I've ever seen.0
View 1 Replies View RelatedDell :: Inspiron 15R Managed To Connect To Other Wi-Fi Access
Jun 28, 2013I just purchased a new Dell Inspiron 15R laptop. I managed to connect to other wifi access elsewhere but this particular wifi network I wish to connect to in my workplace, there is no internet connection for it.
View 3 Replies View RelatedCisco Switching/Routing :: 2921 Connecting To Non Managed Switch
Mar 21, 2012This is for a short temporary time until I get cisco 3560s in place. I have a 2921 configured and it is connecting to an HP non managed non VLAN switch and I cant get any traffic to pass from my computer to the router (pings or anything). Here is brief configuration that should be enough. [code]
Here are my vlans 1-default, 2-management, 192-data, 92-voice, i believe its running rapid spanning tree protocol. Do i have to take off encapsulation on my data vlan to get it to work or make the data vlan default vlan for everything. I am lost as to why this is not working.
Cisco Switches :: Setting Up New SF-300 Managed Switch - Not Passing Traffic
Sep 15, 2011I just purchased a new SF-300 managed switch for the purpose of using it on the DMZ, so we can mirror the internet port and monitor traffic for my company. I have set it up from the web interface to miror port 1 to port 2 and that's pretty much it. I decided to test it before putting it in production, by hooking it up to one of my core network switches, connecting a laptop to it and trying to get online. It doesn't even connect to my DHCP server to get an IP address. If I put the laptop back on the same subnet as the switch management IP, I can still connect to the switches web interface. Isn't the basic functionality of a switch to pass traffic?
I should also mention that I'm not a network engineer, so there might just be something I'm missing with regard to a default setting that needs to be switched off?
Cisco Switches :: SG 300-52 Port Gigabit Managed Switch - Cannot Telnet Nor SSH?
Nov 16, 2011We have recently purchased SG 300-52Port Cisco Switch to support our Network but they constantly having some bizarre issues or I assume bugs, i.e. we cannot Telnet nor SSH to the switch now, whereas we were able to SSH before, we have set them up for Remote Log Services to get some syslogs and reports but no report have been generated nor logs,
I have done some testing through Wireshark and there are absolutely no reports / logs.We have some real issues with this switch and it’s hard to believe that this is a Cisco Product,
SG 300-52 Port Gigabit Managed Switch
Firmware Version (Active Image ) : 1.1.1.8
Firmware Version (Non-active ) : 1.1.0.73
Boot Version : 1.0.0.4
Cisco :: 2960 / LMS 3.2 Devices Showing Not Managed By Campus Manager
Sep 28, 2011We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).