Cisco :: Will AP1252AG-N-K9 Works With WLC 5760
Feb 4, 2013We have 80 LAP1252AG and WLC 4404. We plan to upgrade our WLC 4404 to WLC 5760 but not sure if our current APs will work with the new WLC 5760.
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: How To Configure 5760 WLC And 5760 HA WLC
May 22, 2013I just cannot locate it. Customer purchasing two 5760 WLCs:
1 AIR-CT5760-500-K9
1 AIR-CT5760-HA-K9
I am looking for info on how to configure these 2 WLCs to work together. How do you inform the production WLC that a HA WLC is available to sync with? Do WLCs have to be L-2 adjacent, or will HA operate at L-3? How does this HA setup work? etc.
Cisco :: ISE Compatibility With WLC 5760?
Jun 9, 2013The ISE compatibility Matrix (June 5, 2013), does have a row for WLC 5760 in its tables.
The WLC 5760 Release Notes says it is compatible with with ISE without specfying which features. Why is the WLC 5760 missing from the ISE Compat Matrix and how can I get specific ISE feature support (ie CoA, DACL).
Cisco Wireless :: Joining 3602i To WLC-5760
Jun 13, 2013I am performing a new install of a WLC 5760 and 3602i APs. I have limited experience in setting up WLCs. I am hitting a brick wall in getting the AP to join my WLC. My primary document has been this deployment guide:url...I have also sifted through many of the relevant portions of these guides: url...
I went through the setup wizard and followed the instructions in Ch. 2 to the letter (or at least I think I did). I have DHCP options 43 and 60 configured per the 3600 series Getting Started Guide.I believe my AP discovery process is sound because I see activity when I power on the AP and perform debug capwap ap all from the WLC. I have highlighted lines that I think are relevant. I have attempted to find the answer on my own by searching the Internet for these phrases. [code]
Cisco Wireless :: 5508 - Any Way To Integrate 5760
May 15, 2013We are looking at possibly adding a second 5508 controller to our network and running in HA mode. I see now that there are 5760's available that run on IOS. Is there any way we can integrate a 5760 into our existing network instead of going with a second 5508? I would prefer to invest in newer hardware whenever possible.
View 15 Replies View RelatedCisco Wireless :: 5760 AP Unsuccessful Join Attempt
Jun 13, 2013I know these IOS controllers are new. I ran in to an ap join issue so I figured I'd post the fix
Reason for last unsuccessful join attempt : Failed to add database entry on IOS
check the AP licenses.
WLC-5760#sh license right-to-use Slot
# License name Type Count Period left
----------------------------------------------------------
1 apcount adder 50 Lifetime
If you don't have a licenses you'll need to add them
CCNP - Wireless CWNA and CWAP
Cisco Wireless :: AIR-AP1252AG-A-K9 Won't Load
Oct 11, 2011I have three of these AP that quit associating with the controller after a power loss. I have dismounted one of them and it has an Amber light on ethernet LED and Green Light on radio LED and off on status.It does not respond to reset and nothing happen when i console into it. What might have happened to this AP? It's barely two years. I have tried different power injectors and direct power and still behaves the same way.
View 3 Replies View RelatedCisco :: How Many VLANs Can Be Managed With AIR-AP1252AG-E-K9 AP
Jul 19, 2011How many VLANs can be managed with the AIR-AP1252AG-E-K9 APs ? My customer wants to manage 4 VLANs, data, voice, guest and another.
View 2 Replies View RelatedCisco :: Failed POST For AP1252AG-A-K9
May 8, 2013We have a AP1252AG-A-K9. Everytime we load it up this is what we get (see below). I tried resetting the system ("mode" way) and it did not fix the issue. I tried to reinstall the IOS and it fixes everything up and the AP will work as normal but everytime I reset the modem I will get an error message below. [code]
View 5 Replies View RelatedCisco Wireless :: AIR-AP1252AG-C-K9 Failed - Cannot Access Via IP And CDP
Feb 18, 2013yesterday I have my AIR-AP1252AG-C-K9 failed, I cannot access it via IP and I also cannot find it via CDP. when i connect the power, the ethernet and radio lights go to red and status light goes orange/amber immediately and keep this all the time.if i try to hold the mode button from when i connect the power, all three lights keep off and never be on unless you leave the mode button along and re-connect the power.and there is NO output from the sierial console.
View 3 Replies View RelatedCisco Wireless :: Change Country Code For AIR-AP1252AG-E-K9
Jul 23, 2012We have an AP located on a German site which is supposed to connect to a WLC which is in Germany as well. Our network however is spread to France as well where another WLC is located. Now, the AP can not be convinced to connect to the German WLC. Despite our efforts (e.g. manuel IP configuration, reset to factory defaults) we don't manage to bring that AP to the German network - this is by the way the only AP, all other approx. 200 work just fine.
View 6 Replies View RelatedCisco Wireless :: AIR-AP1252AG Autonomous AP Can Be Changed To LWAPP AP
Aug 25, 2011I would like to know AIR-AP1252AG-A-K9 (Autonomous AP) can be changed to LWAPP AP by changing IOS image??
View 1 Replies View RelatedCisco :: Getting AP1252AG-E-K9 Running Against Microsoft Windows Server 2008 R2 IAS?
Oct 28, 2011How to be able to get AP1252AG-E-K9 running against Microsoft Windows Server 2008 R2 IAS.I am getting these errors:
RADIUS/DECODE: convert VSA string; FAIL
RADIUS/DECODE: cisco VSA type 1; FAILRADIUS/DECODE: VSA; FAILRADIUS/DECODE: decoder; FAIL
RADIUS/DECODE: attribute Vendor-Specific; FAIL
RADIUS/DECODE: parse response op decode; FAILRADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
Wireless :: Wireless Not Works But Wired Network Works
Apr 6, 2011this computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?
View 1 Replies View RelatedCisco :: Add Some APC UPS Devices Into Works LMS 4.1
Jan 17, 2012I am trying to add some APC UPS Devices into CiscoWorks LMS 4.1. For example i have three APC Smart UPS 5000 RT RMXLI with management cards AP9619, i have chosen Device Type as "Smart-UPS RT 5000 XL" in Nom-Cisco Devices list, but when i am creating Invetory collection job, i`m getting status failed for this devices and the error is: "RICS0001:Internal Error,unable to process the collected data from the device"
View 1 Replies View RelatedCisco VPN :: ASA 5505 8.3 (1) To 8.2 (2) Works Only One Way
Jun 26, 2011I’ve set VPN up between two sites using Cisco ASA 5505 and Wizard. Unfortunately VPN works only one way From 8.2 (2) to 8.3 (1) and after spending one day trying to resolve the issue. Logs shows that ping leave ASA 8.3 but never hits ASA 8.2 – opposite way everything works perfectly. [code]
View 2 Replies View RelatedCisco WAN :: SM-ES3-16-P Works As Layer 3?
Apr 29, 2013SM-ES3-16-P works as a layer 3 module which means that the uplink which connects to router ( Internally ) is a layer 3 interface . Is there a way we can use it as a layer 2 switch and connect the uplink as a trunk port ?
View 1 Replies View RelatedCisco :: How NetFlow Works With NAT In Router
Mar 1, 2012How NetFlow works when NAT is enabled in the Cisco Router? ...the translation of IP addresses is done before or after save the packets in the flow caches?
View 3 Replies View RelatedCisco VPN :: 5505 SSL VPN Works From Inside But Not Outside
Sep 20, 2012I'm setting up a VPN in order to share files between two locations. I'm not sure it's the best solution, but he insists on using his Cisco ASA 5505 Firewall via a clientless VPN. His set-up is a simple residential cable modem (Motorola SurfBoard/TimeWarner) set in DMZ mode, the Cisco ASA, and an Ubuntu server.
The Clientless VPN is set up, as are the user groups, and bookmarks. I'm able to browse to the firewall's internal interface IP (https://192.168.1.1) and log in to the Clientless VPN portal, and from there, I can access all of the plug-ins I've configured (CIFS, VNC, etc). The problem is that I cannot connect from outside the local area network.
I think it's something very basic that I'm missing, like a NAT rule. I've tried adding some, but they always seem to interfer with the NAT rule allowing users to connect, via the internet, to the Apache web server (port 80) running on the Ubuntu machine behind the ASA Firewall.
Like I said, I'm not sure this is the best solution for him. Using an ASA seems like overkill for something that can be accomplished with some software, but he and I are both fans of Cisco, and, as I said, he is adament about using this set-up. If it comes down to it, I'd like to be able to honestly tell him that I exhausted every resource in trying to find a way to make this work for him before giving up and going to "Plan B".
Cisco WAN :: 1841 - Routing Between LAN And WAN Works Except WAN
Oct 21, 2011I am fairly new to Cisco IOS, yet I've managed to get it up and running on a Cisco 1841 to act as a router and firewall between WAN and LAN. Everything works *except* I am unable to ping or make any other connection from the router itself to the WAN. It will ping or telnet to the LAN, all LAN to WAN traffic is functioning properly, NAT is setup and functioning, WAN to LAN and inbound firewall is working, yet I still cannot ping or telnet from the IOS interface to anything on the WAN side (I've tried using different source addresses)
I am hoping there is something obvious that I overlooked, perhaps IPS is blocking the traffic? Do I need a specific route entry for the local device? I can post entire config if necessary, but would rather not if there is an obvious solution.
Cisco AAA/Identity/Nac :: Rancid Works With ACS 4.2 But Not 5.3?
Jan 28, 2013We are in the process of upgrading from ACS 4.2 to 5.3. Most things seem to be working but we are having some major issues with the Rancid configuration tool. I can log into devices using CLI login with the credentials that Rancid uses but Rancid fails login.
This worked fine with our 4.2 implementation but not the 5.3. Presumably I need to make a chance in the expect scripts because the new ACS server sends a different string but I have no idea what it is supposed to be.
Cisco WAN :: 2911 / PBR Only Works With IP CEF Disabled
Jan 16, 2013We have a PBR configured on a 2911 router (15.1-4.M2). The PBR is being used to send specific traffic across a S2S VPN instead of an MPLS connection. If ip cef is enabled, the router sends the traffic across the MPLS. If ip cef is disabled, the traffic goes across the S2S VPN. I checked to see if there were any bugs in the code they are running about this and nothing came up. It almost like CEF enabled PBR isn't working on this device, even though it should be enabled by default when ip cef is turned on.
View 3 Replies View RelatedCisco VPN :: PIX-525 - VPN Works On Inside Interface But Not Outside
Sep 25, 2011I have a PIX-525 with an UR license. I was trying to get my VPN to work from my iphone over the weekend but to no avail. I then changed the interface to the inside to see if my iMac could connect and bingo! It worked. I then tried to connect via inside interface with my iphone and it worked.
I connected a PIX-515e and, using the same settings, can connect to the outside interface via my iPhone.
Now, to answer the pressing questions, yes I changed the server IP address in my IPSEC client settings to reflect the outside and inside interfaces as I was testing each one. I was using a preshared secret. Yes, the secret was entered correctly and they all matched...yes, the tunnel name was entered correctly. I was using local user database for authentication with username/password (i.e. no certificate authorization to make things simpler for debugging). I changed the syslog to debugging and I see absolutely no errors when trying to connect my iphone to the outside interface (i.e. turning wifi off so I'm on my 3G data network). The only thing I see is where my iphone hits the outside interface and it does a teardown (or whatever its called) but that's it.
Why would this work like a charm with my PIX-515e and not my PIX-525? Could the VPN accelerator card in the 525 be at fault? The 515e does not have the aecellerator card. why I can esablish a VPN connection on the inside interface but not the outside?
Cisco :: Unable To Get Backup In Works LMS 3.2
Sep 13, 2011I have Cisco works LMS 3.2. When i take manual backup, it hits following error,
ERROR(1101): Database dfmInvDb backup failed.
Validation e:/backup_newdfmdatabasedfmInv.db failed.
[Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed Validation e:/backup_newdfmdatabasedfmInv.db failed. [Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed.
Cisco WAN :: IP SLA Works On 1921 / K9 Or SEC1921 / K9
Oct 5, 2012We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commands
ip sla 2icmp-echo 172.16.1.2timeout 500frequency 1ip sla schedule 2 life forever start-time now
track 10 rtr 1 reachability
delay down 1 up 1
!
track 20 rtr 2 reachability
delay down 1 up 1
ip route 0.0.0.0 0.0.0.0 192.168.1.2 track 10ip route 0.0.0.0 0.0.0.0 172.16.1.2 track 20
Im asking above question because we will need to enable ip-sla on the mentioned router. as i read on the cisco webside, it says Cisco-ISR-1921/K9-IP Base support only IP-SLA RESPONDER feature nothing else.If Cisco-1921/K9 does not support the above commands , should i go for ordering Cisco-1921-SEC/K9 ?
Wireless Works But LAN Do Not
Oct 1, 2011My provider is Time Warner and I have their Wideband 50 MBs. This requires me to have a Motorola Surfboard router/modem (so no stand alone modem)
1. No applications such as google talk, steam, my ftp client or basically any computer application that requires internet for some of its functions. (all on my desktop PC connected to LAN)
2. The internet would partially work. I could get to some websites but it would often fail to load
3. Other computers are able to connect to the LAN and it work without an issue
Cisco VPN Not Connecting To Websites On XP But Works In Windows 7
Nov 10, 2011I can only connect to the development server when I am logged into the VPN (Cisco VPN)I do most of my work on my desktop, which is running XP sp3. While logged into the vpn there, I can reach the SVN and FTP servers fine, but I cannot connect to the development website to view anything.I also have a laptop that is running windows 7. When I connect to VPN on that, I can connect to the website just fine. It is all from within my house so using the same router / cable modem / internet service. Both have installed the latest Cisco VPN softare, and use the same profile to connect.The differences are, windows 7 vs Windows XP. Windows 7 is running Microsoft Security Essentials and XP is running Comodo.
However, even when I turn off Comodo on XP I still can't connect to the website. (Just FYI, I also have XP as dual boot on the laptop and tried connecting from it but no go). I am getting absolutely no assistance from the company I am working on, so really can't ask them anything, I guess it is something I have to figure out myself.But it is frustrating me. I prefer to work on my desktop and it is set up in with all my development tools etc in a nice environment, where the laptop is noisy and slow and not a preferred work place.
Cisco WAN :: How Spanning Tree Works On L3 Switches
Oct 25, 2012I've got a bit of a query regarding how spanning tree works on L3 switches?So say we have a few 3550's connected together and spanning tree has converged and everything is looking ok. We then introduce routing into the network, does STP still operate in the same way or is this layer 2 feature now redundant because routing has taken over?I just couldn't figure out if STP still operates at layer 2 to prevent loops and routing sits on top to route the traffic?
View 1 Replies View RelatedCisco Switches :: SF 300 Works As DHCP Server?
Dec 26, 2012know any plan from Cisco to make 300 series switch to work as a DHCP server?
View 1 Replies View RelatedCisco VPN :: 1841 VPN Works With Embarq But Not With Comcast
Jul 13, 2011I have 3 ASA's, all with the same config attaching to an 1841. One is hosted with Embarq and works fine, one with Comcast is not, the 2nd with a local cable provider is also fussy. Whats up based on the debug from the 1841? I'm getting little debug off the peer ASA from ISAKMP or IPSEC. You can carry the ASA's from one site to the next and the problem does not follow the boxes. This was working fine for several months, but now its not, and no.. the config did not change.
View 4 Replies View RelatedCisco Wireless :: Access Via SSH On WAP 4410N Only Works Via Web GUI?
Jul 17, 2012I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.it is necessary to reset the table mac and other resources that are not possible via WEB GUI..I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.It has some important information about this topic, it is necessary to reset the table mac and other resources that are not possible via WEB GUI.
View 1 Replies View RelatedCisco VPN :: Catalyst 2911 - S2S VPN Only Works In One Direction
Jun 5, 2012I'm very new to cisco devices but we recently acquired a catalyst 2911 device for our co-lo cabinet and I am trying to get a site-to-site vpn connection working between the facility and my offices network as well as a remote access VPN for me to use in case I have to fix something while outside of the office.
The office's gateway is 66.119.163.2 and the device is a TZ210 with it's LAN network being 192.168.1.0 /24
The co-los gateway is 204.244.50.254 and the device is an ASR 2911 with it's LAN network being 10.0.10.0 /24
The S2S VPN connection is up between the two locations and the 2911 device and the servers within it's LAN can ping and RDP to the office's machines. The office network can only ping the LAN interface IP on the 2911 which is 10.0.10.1 but not the servers in the network. the site-to-site VPN was set up with the CCP wizard.
How can I allow the 192.168.1.0/24 network to see the 10.0.10.1/24 network and why do I only currently see the gateway?
If need be I can post my running-config file with the preshare keys redacted.
Cisco :: Works LMS 3.2 (solaris) Installation SP1 Error
Jan 3, 2012We have a Cisco Works LMS 3.2 (solaris) and installing service pack 1 we get an error during installation process:[code] We attach instalation log. We think the problem can be related to bug CSCtn45425.
View 1 Replies View Related