Cisco Wireless :: Access Via SSH On WAP 4410N Only Works Via Web GUI?
Jul 17, 2012
I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.it is necessary to reset the table mac and other resources that are not possible via WEB GUI..I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.It has some important information about this topic, it is necessary to reset the table mac and other resources that are not possible via WEB GUI.
View 1 Replies
ADVERTISEMENT
Mar 10, 2011
I'm trying to find the maximum number of mac filters that are supported on the Cisco 4410N access point. The datasheet says that it supports mac filtering but does not indicate the maximum number of filters.
View 3 Replies
View Related
Oct 21, 2012
I wonder if I can join via the WAP 4410n Bridge and also work as Access-point at a time. The idea is that you can connect to a router that provides Internet service that makes access-point bridge and connect to another WAP 4410n which would be another single access point for wireless bridge.
View 1 Replies
View Related
Sep 5, 2011
I have 12 wap4410n to enable wireless connection to a school building with 3 floor. I planned to configure one as a Access point. My doubt is in which AP mode i have to configure the rest as WDS Bridge or WDS Repeater other mode. In each access point i have Ethernet connection to the switch.
View 1 Replies
View Related
Aug 22, 2010
The documentation for the 4410N states it supports 802.1x however, all I see is to configure 802.1x using mac address or using uername and password.
Does the 4410N support 802.1x using EAP? If so how is it configured?
View 1 Replies
View Related
Jun 28, 2011
I need a power Injector compatible for WAP 4410N.
View 3 Replies
View Related
Oct 18, 2012
I would like to configure 3 Access Point (WAP4410N) to extend the wifi in my house. I try it to do several configuration but it doesn't work.
In this configuration, the wifi devices disappears and re-appears constantly. I lose the IP addresses and they all come down only every 5 seconds. I made screen shots of the 3 terminals in the word document attached below
View 2 Replies
View Related
Oct 31, 2010
I installed one of these on a small network. It's going through a mini-switch 5 port netgear to a larger 16 port netgear. Users are only able to get (4Mbps, 5Mbps) down on a file transfer. Shouldn't I be able to get closer to 80 Mbps on a 100Mbps network when connected on 802.11N?
View 10 Replies
View Related
Apr 23, 2011
I’m planning to use Cisco 4410N AP for my new office. I have 20 offices in 1st floor (20 * 15 FT floor size). I want to know is it possible to cover the entire floor using one 4410N AP?
View 3 Replies
View Related
Nov 19, 2010
Have a Linksys E-3000 router and a WAP-4410N which I wish to configure as a repeater to extend network coverage. E-3000 IP has been changed to 10.10.1.1. How do I do it ? What do I connect to what in order to configure the WAP-4410N to new settings? It will of course be located remotely from the router. At this time network consists of a main PC and 2 wireless laptops. I have read the manual and it doesn't answer the above described situation.
View 7 Replies
View Related
May 26, 2011
I have a big problem with my cisco wap4410n .. I have upgrade the firmware of this AP to V2.0.3.3 for supporting multiple SSID after my upgradation is finished ..one time I can able to access the administration page But when I connected to another system the same AP I cannot able to connect through ethernet .The network connection in the system shows connected for one second and not connected for the next second its simultaneously repeating the same ..and still not connecting ..i changed my ip setting to default ie 192.168.1.xxxx and again to old config 192.169.3.xx any way the same instance is showing ..
In the WAP the power led, wireless led , are connected good but the Ethernet led is blinking off on stage.I have many times hard reset the WAP but off no use the same happens .i could not able connect to WAP.This may be the worse case ever seen in wap4410n …
View 1 Replies
View Related
May 20, 2012
We are on our 2nd 4410N. we monitor the AP with software that graphs the signal strength. the first 4410N would completely dissappear for about 3 to 5 seconds every few hours, that would disconnect users and annoy them greatly. a few weeks after we bought it, we sent it back to Cisco who sent us a new replacement. we have been monitoring the new one and several times an hour strength strength drops about 50DB for about a minute. monitoring is done from about 15 feet away from the AP.
View 1 Replies
View Related
Sep 28, 2010
We installed a new WAP 4401n to extend a network and plugged it into a D-Link mini swtich (5 ports). In about 2 minutes we got no activity on the switch. We pulled power on the mini-switch, waited a couple minutes and re-powewred. No activity. Looks like we blew the switch. Put another mini-switch in and it did the same thing in about 4 minutes.
The WAP4401n is a PoE ready AP. We are checking right now on whether it's a cable wiring problem or an AP problem.I believe we are using the RJ-45 data cable that came with the AP.
View 1 Replies
View Related
Apr 4, 2012
I'm having problem with the function One-to-one of the router RV042. Access through the NAT function works normally until a certain moment redirection are being made to another address of LAN that are not correct. Just restart the router and NAT function normally again. I have the most current version of firmware v1.3.13.02.
View 1 Replies
View Related
Feb 2, 2013
I'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
View 7 Replies
View Related
Jun 2, 2011
How does the implementation of encryption wep wpa etc in hardware cisco wap4410N ?
View 1 Replies
View Related
Jan 20, 2010
I've looked over all the spec sheets and hunted around, can't seem to figure out if the RV016 or RV082 support PoE. what Cisco product would be best to inject PoE on a small business network. I have 1 RV016, and I'm looking to deploy a RV082 and WAP4410N, with the 4410 being the only device on my network that would need PoE, I'd rather not have to buy a dedicated PoE Switch or Hub just for that one device.
View 5 Replies
View Related
Apr 6, 2011
this computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?
View 1 Replies
View Related
Jul 19, 2011
My computer connects to my institute LAN.They provided us a configuration according which I configured TCP/IP v4 settings and firefox settings.All the webpages open smoothly but other internet realted services apart from firefox are not working eg Skype,Windows Update,Mu Torrent etc.The LAN connection says "No Internet access"(The sites are opening nicely though) and puts a yellow exclamation marks on the LAN symbol in system tray.
View 9 Replies
View Related
Jan 14, 2012
So,I'm living in a university campus and I've got an internet connection via a proxy server.The thing is,when ever I plug in the network cable,my PC recognizes the network,but the little network tray says "No internet access". But the curious thing is that the internet actualy works.My browser works,I can access any website (well,except the restricted ones via proxy) but it works just like any other internet connection in the campus. But,recently I've got my hands on a VPN account to have access to things that my proxy wouldn't allow me (torrents for example).But,probably because of that "No internet access" problem,when ever I try to make that VPN account,it tells me that I need to connect to the internet first. I already am,but my PC still keeps requiring an internet connection.I can't manualy connect to it,since I don't have the ISP data required. I've only got my VPN account data (VPN username and password).
This is kind of annoying,since this only happens to me,my other room mates don't have this problem,they plug in their cables,their network adapters recognize both the network and the internet access. Only mine says "No internet access" but the internet works fine.My operating system is genuine,when ever I go home and connect to my home network this problem doesn't ocure anymore,this only happens when I connect to my university's internet connection.I've tried reinstalling my operating system.Still no results.I'll attach a printscreen so you could see exactly what I mean.
View 1 Replies
View Related
Mar 1, 2011
connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies
View Related
Jun 27, 2011
I have very strange behaviour on my Cisco 2801 router when I applied access list on wan interface.
Architecture:
SIP Provider <----> Cisco 2801 <-----> CUCM 6
Problem:
We are using Cisco 2801 as Voice gateway for CUCM 6. so only one purpose of this router is just receiving calls on sip dial-peer and transfering to internal network.
If you look on access list below, if 'log' words don't present on these 2 lines, access list didn't work. Problem with it is that when I establish call from us or to us I can't hear incomming RPT stream, but other side can hear me. But when I type word 'log' there, everything stars working immediately.
Cisco 2801 IOS version:
Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9_IVS-M), Version 12.4(6)T9, RELEASE SOFTWARE (fc2)
[Code].....
View 5 Replies
View Related
May 15, 2011
I need remote access to certain programs on my home PC but I just cannot get it to work.
Program:- webcamXP
When I set the programs port preferences (i.e. port 8087), I can connect with"127.0.0.1:8087" and webcamXP work fine. But when I replace the localhost with my external IP (lets say 79.149.114.227, so that would be "http://79.149.114.227:8087".I tried port forwarding: I have added the port to my NAT in the router's setting so it should be fine, but it is not (numbers are fictual of course):
external port start 8085,
external port end 8089,
protocol TCP/UDP,
internal port start 8085,
internal port end 8089,
server IP address 192.168.1.215)
I also tried disabling AVG Internet Security 2011's firewall temporarily just to check it it was blocking it, but got the same result.I checked if Windows own firewall was on, but it is off.I cannot find any setting in the router's own configuration screen to disable any build in (router's) firewall (if it has any).
View 6 Replies
View Related
Mar 27, 2013
I have a new Dell Vostro 3360 with a Dell Wireless 1703 802.11b/g/n (2.4GHz) card. No internet access (wireless) from my home (other notebooks work perfect). LAN works fine. I have a AVM Fritz!Box 7360SL router at home.
On the other hand, wireless internet works fine at my lab (here : 802.11g, unsecured hotspot). Installed latest drivers and did even a clean re-installation (Windows 7 ultimate or professional) - problem remained.
View 4 Replies
View Related
Feb 19, 2013
I am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies
View Related
Oct 1, 2011
My provider is Time Warner and I have their Wideband 50 MBs. This requires me to have a Motorola Surfboard router/modem (so no stand alone modem)
1. No applications such as google talk, steam, my ftp client or basically any computer application that requires internet for some of its functions. (all on my desktop PC connected to LAN)
2. The internet would partially work. I could get to some websites but it would often fail to load
3. Other computers are able to connect to the LAN and it work without an issue
View 1 Replies
View Related
Oct 9, 2011
Connecting with a LAN cable to the router works 100%, and I can get access to the router's IP-address, but when trying to connect to wireless, it asks for the WPA key, and I fill it in, but then gives an error saying "Can't connect to wireless network: *network name here*" (This is translated from Dutch to English, so it might be a bit different on an English computer).
View 3 Replies
View Related
Jul 11, 2012
I have quick question here does AP BR1310 can be associated with WLC 5500?
View 4 Replies
View Related
Feb 20, 2012
We have two different entities we support and both are set up as autonomouse wireless groups. The SSID is the same though so they can use their 7921's between floors and buildings. The problem we have had is that the phones on the first floor were getting the IP's of the organization on the second floor. When you view the AP's on the phone the ap directly next to it on the first floor (the one its suppose to talk to) is listed first, The strange thing is that shows it is connected to the right AP (the first floor one). The AP on the second floor is also listed but its about third down. After the phone sits it will actually change IP's but not all of them. Their were a few phones that took about a half a day to get the correct IP.
My question is how do these phones grab their ip's? I know how DHCP works but I am needing to know specifically how the radio works on the 7921's. What is the boot up process? It appears that it must cycle through each channel starting with the highest and loop through a process in descending order: compare ssid's and then authenticate if possible. I am assuming it is seeing the second floor first because initially they all get the second floor ip. The second floor is on channel 60 and the one it should connect to is on channel 36 (We are using 802.11a). That's how I came up with my descending channel theory.
View 7 Replies
View Related
Feb 5, 2011
I have a HP G60-530US and i use Mozilla Firefox. My computer had froze up and i had to restart it. My wifi is working but it keeps sending me firefox cant find the server at... message. It said that the firewall or proxy could be doing it but i cant find a problem with it. My computer had just updated so i dont know if that could be the issue. My other computer is working just fine so i know its not the router. My computer has done with before but i cant remember how i fix it and if im not mistaken my computer had updated when it happen the last time, but im not 100% sure.
View 3 Replies
View Related
Oct 11, 2012
Windows XP Wireless works slow.
View 2 Replies
View Related
Dec 2, 2012
When I use my desktop wired to my broadband I can access any site on the Internet. Yet whenever I use the wireless either on my laptop, iPad or a net book I can only access some sites!
View 2 Replies
View Related
Jan 23, 2011
I have a Netcomm NB9WMAXXn router and 3 laptops i want to connect to it wirelesslyThe problem is that the iwreless internet connection slows down and eventually drops out after about 30m unless one of the laptops remains connected via Ethernet to the router. The wireless laptops will remain connected to the router but the internet connection will fail. The laptop with Ethernet connection retains a very good connection so i'm thinking this is an issue with my router or it's configuration
View 1 Replies
View Related
