Cisco Wireless :: WAP 4410N Wipes Out Mini Switch
Sep 28, 2010
We installed a new WAP 4401n to extend a network and plugged it into a D-Link mini swtich (5 ports). In about 2 minutes we got no activity on the switch. We pulled power on the mini-switch, waited a couple minutes and re-powewred. No activity. Looks like we blew the switch. Put another mini-switch in and it did the same thing in about 4 minutes.
The WAP4401n is a PoE ready AP. We are checking right now on whether it's a cable wiring problem or an AP problem.I believe we are using the RJ-45 data cable that came with the AP.
View 1 Replies
ADVERTISEMENT
Dec 18, 2011
I'm loosing about 40GB of data. If worst comes to worst i might go with another brand of router instead as i don't wanna waste a lot of money again as i currently feel i have with the E4200. Enough whining, here is my problem. The FTP and Media Server feature works nicely. I have a 2TB USB 2.0 HDD attached to the router's USB port. I use it for images and my music collection ripped there so i can play it all from my PS3 and TV. I also have many GB of video recordings and converted DVD discs for easier access. (And no, before anyone speaks of piracy, it IS legal, at least in my country, to back up your legit media) Now, everything worked fine, until one day after a few weeks, the router hanged for some reason so i decided to reboot it. To my disappointment it also wiped video and audio from my HDD which really got me pissed as i lost all track of what i had on the HDD. The Media Server was also having connection issues once in a while so i decided to update the firmware from 1.0.00 to 1.0.03. It immediately fixed the connection issues of the Media Server. Another noticeable change is that files transferred via FTP will show immediately via the Media Server without the need to update the database via the router as i needed to do in 1.0.00. Now today there was a power loss in the neighbourhood so the router went dead along with the HDD. To my big disappointment, everything was gone from the HDD when i started it up again. Images, music, video and even my application backups etc. It was just plain empty except for the root folders. I have done a few tests and figured that even if the HDD stays on, cutting the power to the router will wipe the connected HDD. What's up with that? Even a silly Windows PC wont nuke your files that much if an accessed HDD was disconnected while in use. Do i really need a UPS system for the router and safely disconnect the HDD from the router via the user interface every day? If so, the concept of having a router with these nice features is really useless and money theft in my opinion.
View 9 Replies
View Related
Feb 13, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
After setting up the newly arrived router, renaming the SSID and changing password for 2.4 GHZ AND 5 GHZ and also renaming the default router username and password, I decided to update the firmware.The procedure wiped all configuration I've made forcing me to do all over again.
View 3 Replies
View Related
Oct 10, 2010
i HAve dell inspiron mini A10 every time when i try to connect to wifi its says slide the switch to enable wlan .....but there is no switch on the machine .
View 2 Replies
View Related
Aug 22, 2010
The documentation for the 4410N states it supports 802.1x however, all I see is to configure 802.1x using mac address or using uername and password.
Does the 4410N support 802.1x using EAP? If so how is it configured?
View 1 Replies
View Related
Jun 28, 2011
I need a power Injector compatible for WAP 4410N.
View 3 Replies
View Related
Oct 18, 2012
I would like to configure 3 Access Point (WAP4410N) to extend the wifi in my house. I try it to do several configuration but it doesn't work.
In this configuration, the wifi devices disappears and re-appears constantly. I lose the IP addresses and they all come down only every 5 seconds. I made screen shots of the 3 terminals in the word document attached below
View 2 Replies
View Related
Jul 17, 2012
I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.it is necessary to reset the table mac and other resources that are not possible via WEB GUI..I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.It has some important information about this topic, it is necessary to reset the table mac and other resources that are not possible via WEB GUI.
View 1 Replies
View Related
Oct 31, 2010
I installed one of these on a small network. It's going through a mini-switch 5 port netgear to a larger 16 port netgear. Users are only able to get (4Mbps, 5Mbps) down on a file transfer. Shouldn't I be able to get closer to 80 Mbps on a 100Mbps network when connected on 802.11N?
View 10 Replies
View Related
Mar 10, 2011
I'm trying to find the maximum number of mac filters that are supported on the Cisco 4410N access point. The datasheet says that it supports mac filtering but does not indicate the maximum number of filters.
View 3 Replies
View Related
Apr 23, 2011
I’m planning to use Cisco 4410N AP for my new office. I have 20 offices in 1st floor (20 * 15 FT floor size). I want to know is it possible to cover the entire floor using one 4410N AP?
View 3 Replies
View Related
Nov 19, 2010
Have a Linksys E-3000 router and a WAP-4410N which I wish to configure as a repeater to extend network coverage. E-3000 IP has been changed to 10.10.1.1. How do I do it ? What do I connect to what in order to configure the WAP-4410N to new settings? It will of course be located remotely from the router. At this time network consists of a main PC and 2 wireless laptops. I have read the manual and it doesn't answer the above described situation.
View 7 Replies
View Related
May 26, 2011
I have a big problem with my cisco wap4410n .. I have upgrade the firmware of this AP to V2.0.3.3 for supporting multiple SSID after my upgradation is finished ..one time I can able to access the administration page But when I connected to another system the same AP I cannot able to connect through ethernet .The network connection in the system shows connected for one second and not connected for the next second its simultaneously repeating the same ..and still not connecting ..i changed my ip setting to default ie 192.168.1.xxxx and again to old config 192.169.3.xx any way the same instance is showing ..
In the WAP the power led, wireless led , are connected good but the Ethernet led is blinking off on stage.I have many times hard reset the WAP but off no use the same happens .i could not able connect to WAP.This may be the worse case ever seen in wap4410n …
View 1 Replies
View Related
May 20, 2012
We are on our 2nd 4410N. we monitor the AP with software that graphs the signal strength. the first 4410N would completely dissappear for about 3 to 5 seconds every few hours, that would disconnect users and annoy them greatly. a few weeks after we bought it, we sent it back to Cisco who sent us a new replacement. we have been monitoring the new one and several times an hour strength strength drops about 50DB for about a minute. monitoring is done from about 15 feet away from the AP.
View 1 Replies
View Related
Oct 21, 2012
I wonder if I can join via the WAP 4410n Bridge and also work as Access-point at a time. The idea is that you can connect to a router that provides Internet service that makes access-point bridge and connect to another WAP 4410n which would be another single access point for wireless bridge.
View 1 Replies
View Related
Jun 25, 2012
I am trying to connect a SF200-48 switch via Mini-GBIC MGBLX1 fibre module to a Cisco 3750 switch with a GLC-SX-MM fibre module installed both running a 1000 Mbps. When connected together they do not enable. Are there compatibility restrictions or is it that the Mini-GBIC modules cannot be used to uplink to a LAN?
View 2 Replies
View Related
Sep 5, 2011
I have 12 wap4410n to enable wireless connection to a school building with 3 floor. I planned to configure one as a Access point. My doubt is in which AP mode i have to configure the rest as WDS Bridge or WDS Repeater other mode. In each access point i have Ethernet connection to the switch.
View 1 Replies
View Related
Jun 2, 2011
How does the implementation of encryption wep wpa etc in hardware cisco wap4410N ?
View 1 Replies
View Related
Jan 20, 2010
I've looked over all the spec sheets and hunted around, can't seem to figure out if the RV016 or RV082 support PoE. what Cisco product would be best to inject PoE on a small business network. I have 1 RV016, and I'm looking to deploy a RV082 and WAP4410N, with the 4410 being the only device on my network that would need PoE, I'd rather not have to buy a dedicated PoE Switch or Hub just for that one device.
View 5 Replies
View Related
Jul 25, 2012
I'm checking a mini laptop for a friend and found out that the wireless does not work on it. First I tried checking the button to activate it and it didn't work, even if the indicador says it's off/on it doesn't have an effect on the network adapter. The PC is running Windows 7 32-bit. I downloaded the Ralink 2011 802.11 b/g/n WiFi Adapter driver and tried reinstalling it. Funny thing is that the installation went smoothly but in the driver details the name of the driver shows the default Windows one, 3.0.0.14 I beleive. Tried again to install the driver since I thought it was a bad download or something but the same results. I've tried with the Atheros driver but the installer said that since the card is not present no drivers would be installed, so I assume that the model is the Ralink. So far the network card appears disabled on the network adapter window, and if I try to enable it, it remains disabled.
View 1 Replies
View Related
Nov 13, 2011
My provider is Comcast and it is a cable modem.I have a HP mini 311 netbook running XP, AVG, and ZoneAlarm. Recently I lost the ability to see any wireless networks.When I try to repair I get an error saying it can't repair the connection. I am able to plug in and connect. [code]
View 7 Replies
View Related
Dec 17, 2012
I have a hp mini laptop,it actually detects all the wireless network in my environment, but it cant connect to anyone of them
View 1 Replies
View Related
Dec 21, 2011
i cant find the correct drivers need to get the wireless up and running for a hp mini i purchased second hand for my youngest for christmas?
View 1 Replies
View Related
May 22, 2011
my hp mini is showing no network connections connect to the internet?
View 1 Replies
View Related
Apr 27, 2011
how do i turn on wireless on my computer. it is a inspiron mini
View 2 Replies
View Related
Oct 11, 2011
Cant connect to wireless networks with HP MINI 110 Notebook....Device manager show Atheros Fast enternet is connected and working properly. Dont see any icon on taskbar for wireless.OS is Win XP PRo...
View 7 Replies
View Related
Mar 7, 2013
how can i upgrade to Mini IOS Version 7.3.1.73 on the AIR-CAP 3502I. we some that have Mini IOS Version 7.3.1.73 and some that have Mini IOS Version 7.0.112.74. want them all the same.
View 1 Replies
View Related
Mar 13, 2011
I've got an older desktop that needs a dual band upgrade and would like to know if a PCIe adapter w/ external antennas for desktop wireless is better/faster than the USB variety? They cost about the same. The router is a dual band WNDR3700 v1.
I've heard salespeople at retailers say, for desktop, go w/ the USB as they offer better performance than PCIe adapters even w/ external antennas... Does anyone know if the extra noise within the desktop case kills whatever benefits that the extra power and external antennas that a PCIe card has over a USB adapter?
View 2 Replies
View Related
Jul 6, 2011
I have a HP mini when i go into network connections the wireless icon is gone... I'm not sure what happen... I have already looked in the device manager and nothing is highlighted or has a ? or X.
here is my ipconfig info:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
IPCONFIG /ALL
[Code]....
View 8 Replies
View Related
May 5, 2012
Can I upgrade or add WPA to WEP on Intel(R) PRO/Wireless Lan 2100 3B Mini PCI Adapter
View 1 Replies
View Related
Dec 31, 2011
I have recently re-installed Windows XP on Dell Inspiron 2200 and notice that I no longer have the icon to view or repair wireless connections. I have installed drivers R91081.EXE (8MB), R92088.EXE (1MB) and INFEENUA.cab (195KB) from Dell web site – Drivers download page but can’t see to be able to bring up the icon.
Which driver(s) I need to download?
I have owned this laptop since 2005. It has been excellent so far and I would very much like to keep using it until it finally gives up.
View 5 Replies
View Related
Feb 24, 2010
the computer was using a different program to manage the wireless connection. Even though it said it was connected, my internet didn't work. Not knowing anything about this new program, I removed it and tried to connect with the Windows wireless manager. It didn't acknowledge any of the wireless connections around, just a computer-to-computer connection. I took it to a friend's apartment to use their computer and internet to search for options and it still didn't recognize any networks around, now not even the computer-to-computer connection. It now tells me "No wireless networks were found in range. Make sure the wireless switch on your computer is on...." The Mini doesn't have a "switch," but I read where F2 can turn it on...however, pressing Fn-F2 is not working for me, either.
View 9 Replies
View Related
Feb 7, 2013
What type of Mini-GBICS should I used for RJ45 ethernet connections for my 4402 Wireles Lan Controller? Should I use the GLC-T SFP? Is it the right one? aAso is Mini-Gbics a industry standard which means I can use any brand of Mini-GBIC for this Connection like Dell Brand Dlink or Others.
View 1 Replies
View Related
