I have Cisco works LMS 3.2. When i take manual backup, it hits following error,
ERROR(1101): Database dfmInvDb backup failed.
Validation e:/backup_newdfmdatabasedfmInv.db failed.
[Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed Validation e:/backup_newdfmdatabasedfmInv.db failed. [Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed.
When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed,I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without success.
I am not able to backup ACS 5.x server by means of SFTP protocol. We use ACS 5-2-0-26-2. My configuration of repository is:
repository SFTP
url sftp://x.x.x.x/home/user
user user password hash 455ad
command 'backup acs01 repository SFTP' does not work and I receive the following error message on ACS server:
%SSH connect error
On my sftp server I can find the following error messages:
Apr 6 06:57:46 CR01 sshd[8561]: Accepted password for user from 10.20.86.72 port 47924 ssh2Apr 6 06:57:46 CR01 sshd[8563]: Received disconnect from 10.20.86.72: 11: disconnected by user
How to successfully performed backup by means of SFTP protocol? Do I need any other configuration settings except repository? Do I need to store my SSHD RSA key to ACS? I am able to copy files using SFTP from other computers, so it seems that SFTP server is set correctly.
When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed
I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without succes.
I am able to access ASA via hostname but with IP address it does not work.Need to know what config i need to put so i am able to access it using IP by ssh and ASDM? ASA is 5520 version is 8
View 12 Replies View RelatedI m unable to take backup of Switch c2960 using
#Copy flash: tftp
while i m taking it show some error
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
sh flash:
Directory of flash:/
2 -rwx 1919 Mar 1 1993 10:27:17 +05:30 private-config.text
3 -rwx 11056 Mar 1 1993 10:27:17 +05:30 config.text
4 -rwx 804 Mar 1 1993 05:30:42 +05:30 vlan.dat
6 -rwx 2072 Mar 1 1993 10:27:17 +05:30 multiple-fs
7 drwx 192 Mar 1 1993 05:37:02 +05:30 c2960-lanbasek9-mz.122-44.
SE6
I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .
View 0 Replies View RelatedI am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies View Relatedthis computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?
View 1 Replies View RelatedAfter the upgrade of LMS 3.2 to LMS 4.01 everthing works. After i fixed my last problem (syslog time issue). I´d saw that the automated system backup doesn´t work. I´d tried to backup the system by script. Than i find out that the perl.exe is damaged (0KB). So than i copied the perl.exe from my old Cisco Works Server to the new Server. Than i tried to make a Backup and get the mentiond error ...
D:CiscoWorksCSCOpxin>perl.exe D:CiscoWorksCSCOpxinackup.pl d:Temp
ew
install
************************************************************
Backup to 'd:/Temp/newinstall' started at: [Wed Oct 19 09:39:50 2011]
[Wed Oct 19 09:39:50 2011] ERROR(375): No database files are available for the
installed applications; nothing to back up.
[Wed Oct 19 09:39:50 2011] Backup failed: 2011/10/19 09:40:00
[code]....
Why does Cisco recommend a configuration of originate-only on the ASA with multiple peers configured and the answer-only to the other end? Shouldn't it work as Bi-Directional ?
[URL]
The only scenario I see which could break is if both peers try to establish a VPN at the same time to the ASA. Is there any other reason ?
1)how can i backup the configuration on cisco lms 4.2 and to re-imported later when i re-install the lms 4.2
2)how can i change the admin password on cisco lms 4.2
One of my branch offices is connected to an ADSL line as well as a VDSL line.Since I really don't need the ADSL line I came up with the idea to use it as a backup line.So I searched google and found this nice little article URL. I wonder if the router will switch back to the primary ISP if the primary line comes up again?
View 3 Replies View RelatedAny one see the pronl;em where LMS 4.2.2 cannot backup an ASA 5525-X (UKHSL-N01-AFW02)..The Inventory collection is fine, to a point.I have applied all updates LSM etc. [code]
View 7 Replies View RelatedI am trying to create a VBR soft pvc across a T3 and T1 backup link, but I am confused about what values to use for PCR, SCR and MCR. If I use high values for the T3, what will happen when this link is down and the soft PVC reroutes across the T1? I would like to use percents (%) for the values, i.e. voice can use 25% of the link, then it would make more sense when using the backup T1 link.
View 2 Replies View Relatedif i enable Controller Configuration Backup is that included in the server backup? and can the controller configs be specifically extracted from the server backup?
View 8 Replies View RelatedWe have cisco works LMS 3.1 and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?
View 5 Replies View Relatedat the moment I have a 888 router that works fine, I want to configure backup (I already have configure ISDN backup but the performance it's to poor), and I want to use an other router 887 (that I already have) with adsl.
My idea is to configure the second router as stand alone gateway, and confiure in the first router a "ip route 0.0.0.0 0.0.0.0 VLAN1 192.168.0.253 100".But I know that this second route is used only in case the interface status of primary route goes down but not in case fault only protocol.
configure a better routing or faulting procedure?
-----------------------------------
888
VLAN1 192.168.0.254
ATM0.1 1.1.1.1
ip route 0.0.0.0 0.0.0.0 ATM0.1
ip route 0.0.0.0 0.0.0.0 VLAN1 192.168.0.253 100
-----------------------------------
887
VLAN1 192.168.0.253
ATM0.1 2.2.2.2
ip route 0.0.0.0 0.0.0.0 ATM0.1
-----------------------------------
implement backup WAN links to complement the metro Ethernet links we currently use so we have some redundancy. These will most likely be a VPN over an Internet service but might be another Ethernet type service, the medium shouldn't really matter I wouldn't think. What I am looking for input on is what is the best way to implement this? Would I just set costs so that the backup is only used when the primary goes down, or should I create new OSPF area for the backup links?
Currently the core switches that are also our routers are 3750G stacks running ip services. We are getting ready to install new firewalls at each location that will become the gateways for the vlans currently on the core switches to give us much more control over segmentation, and because of this I am thinking that it may make sense to then move the OSPF instance from the core to the firewalls. In the drawing I did not show the access layer switches off of the core, and the MOE circuits actually terminate into a 3550-12T switch before the core. I think I will actually eliminate those 3550-12T switches and go straight into the core. This is a current state drawing, so does not include the backup links I am planning.
want to connect three networks with each other via two media one ethernet/fiber optic and other through wireless as backup link.how can i connect these three networks so that if my ethernet/ fiber optic connection fails than computer on networks can still communcate via wireless link (i mean if ethernet/fiber optic fails then wireless link should automatically be established/
View 1 Replies View RelatedPlatform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]
I tried to backup ACS 5.1 but i found error messages as below
acs backup25Nov11 repository 25Nov11Repository
% Repository not found
% Error: Invalid repository name 25Nov11Respository
Please use a configured repository.
How to backup the configuration on cisco acs 5.2 and how to restore it , if some thing wrong happened
View 7 Replies View RelatedI have an ASA 5510 running 8.4 with dual ISPs setup on 2 different interfaces: outside(primary),backup(backup). I also have a site to site VPN to another ASA in another city. The VPN is now setup on the outside interface and works fine. What I wanted to do is to make the VPN run over the backup interface only.
So, I modified the the crypto map on the remote side to use the backup interface IP and created a tunnel-group for it. I then created a crypto map for the backup interface and enabled ikev1 on it. The default route is set to use the outside interface so I created a static route that routes traffic bound for the outside interface on the remote side to the backup interface default gateway. I can get the tunnels to establish but no traffic is passing through them. I though then that I need a NAT for the tunnel traffic to I created a NAT as well but still no traffic passed. I tried the packet-tracer and it said the traffic was allowed and from the show crypto ipsec sa command I can see the tunnel setup but no traffic will go across it.
Cisco ACS 5.x appliance?How to back up Config?What is best way, via TFTP? COPY Startup-config tftp:?COPY Running-config tftp:?I currently use Solarwinds CatTolls to back my Cisco Switches, can I use this for Cisco ACS also?
View 3 Replies View RelatedHow to backup the configuration of Cisco devices managed by LMS 4.2 and store it in Folder , than restore it once it need it
View 10 Replies View RelatedI am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
#######################################
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
#######################################
we have ACS 4.1 appliance and will do upgrade to 4.2. We need backup user database and system settings.via Gui I am not sure what all we backed up - dmp file seems to be only encrypted user databse but it can be crypted back up file.
How is possible do complete backup of current machine (user database and system config)? Is it possible via Gui or has to be done CLI access?After upgrade will be on machine previous config and database or or will be appliance completelly re-imaged?
I am trying to create a backup tunnel from an ASA 5505 to a pix 501 in the case of the Main ISP failing. The Pix external side will stay the same, but not quite sure how I can create a new crypto map and have it use the Backup ISP interface without bringing down the main tunnel.
My first thought was to add the following crypto map to the configuration below: [code]
I want to restore a backup from c2960 to other one.Why is recommended to remove any security commands, like AAA?
View 2 Replies View RelatedI am working with a client that currently has an ASA 5505 with two ISPs for failover using a tracked interface. I would like to configure logging so that the ASA will email us when the Primary ISP goes down and fails over to the backup. Here is what I have so far...
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
[code]....
The primary interface is Outside and the backup is obviously Backup
I try to create a reposiroty for FTP Backup but it is not working with directories. Isn't it possible to create FTP repositories with directories?
I need to ad this URL e.g.: ftp://server/IT/Wi-Fi/Backup
This is not working. % Error reading directory on remote server
It works only when I add only the server. ftp://server/
Is there any way to add directories to the URL? Or what is wrong in my thought?
I think to use NFS but I'm not sure if that way is better as FTP, because FTP is default
I've been setting up building and testing our new ACS 5.x boxes and I've been running into a spot of bother with the backup restore feature. This most likely due to my unfamiliarity with the tool.
As part of my testing for Backup/Restore, I first backup the data using the Removal and backup tool in Secure ACS View (found under data management. I then confirm that the new FULL backup has been populated my test repository and is available in the restore feature. (also under Data Management) My next step is to create a few test Network Device Groups, Identity groups, and users Then I go back to the restore feature select the Back up file I just created, I also check the box Skip View Database backup before Restore and hit the restore button.
The box goes through the expected steps including a reload. When it comes back up I would expect the test users, groups etc I created after the last backup to be gone as they did not exist at that time. Although I find the opposite is true. Any settings I made after the last backup are still present. I do not have incremental backups enabled.
I essentially want to test a backup of the database of users and groups/rules etc make changes and then restore that database to the previous backed up configuration.